The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Photonic bandgap fiber-based Surface Plasmon Resonance sensors
Open accessAbstract
The concept of photonic bandgap fiber-based surface plasmon resonance sensor operating with low refractive index analytes is developed. Plasmon wave on the surface of a thin metal film embedded into a fiber microstructure is excited by a leaky Gaussian-like core mode of a fiber. We demonstrate that by judicious design of the photonic crystal reflector, the effective refractive index of the core mode can be made considerably smaller than that of the core material, thus enabling efficient phase matching with a plasmon, high sensitivity, and high coupling efficiency from an external Gaussian source, at any wavelength of choice from the visible to near-IR. To our knowledge, this is not achievable by any other traditional sensor design. Moreover, unlike the case of total internal reflection waveguide-based sensors, there is no limitation on the upper value of the waveguide core refractive index, therefore, any optical materials can be used in fabrication of photonic bandgap fiber-based sensors. Based on numerical simulations, we finally present designs using various types of photonic bandgap fibers, including solid and hollow core Bragg fibers, as well as honeycomb photonic crystal fibers. Amplitude and spectrum based methodologies for the detection of changes in the analyte refractive index are discussed. Furthermore, sensitivity enhancement of a degenerate double plasmon peak excitation is demonstrated for the case of a honeycomb fiber. Sensor resolutions in the range 7 * 10(-6) -5 * 10(-5) RIU were demonstrated for an aqueous analyte.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface plasmon resonance sensors: review
Homola, J., Yee, S. S., & Gauglitz, G. (1999) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(98)00321-9 · Cited by 5,453
Notizen: Radiative Decay of Non Radiative Surface Plasmons Excited by Light
Kretschmann, E., & Raether, H. (1968) · Zeitschrift für Naturforschung A · doi:10.1515/zna-1968-1247 · Cited by 3,377
Surface plasmon resonance for gas detection and biosensing
Liedberg, B., Nylander, C., & Lunström, I. (1983) · Sensors and Actuators · doi:10.1016/0250-6874(83)85036-7 · Cited by 2,539
A fiber-optic chemical sensor based on surface plasmon resonance
Jorgenson, R. C., & Yee, S. S. (1993) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(93)80021-3 · Cited by 1,229
Hassani, A., & Skorobogatiy, M. A. (2006) · Optics Express · doi:10.1364/oe.14.011616 · Cited by 451
Self-citationA commercial solution for surface plasmon sensing
Melendez, J., Carr, R., Bartholomew, D. U., Kukanskis, K., Elkind, J., Yee, S., Furlong, C., & Woodbury, R. (1996) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(97)80057-3 · Cited by 206
Phase jumps and interferometric surface plasmon resonance imaging
Grigorenko, A. N., Nikitin, P. I., & Kabashin, A. V. (1999) · Applied Physics Letters · doi:10.1063/1.125493 · Cited by 163
Self-citationOptical-fiber surface-plasmon resonance sensor with multiple resonance peaks
Monzón-Hernández, D., Villatoro, J., Talavera, D. V., & Luna-Moreno, D. (2004) · Applied Optics · doi:10.1364/ao.43.001216 · Cited by 112
Gao, Y., Guo, N., Gauvreau, B., Rajabian, M., Skorobogata, O., Pone, E., Zabeida, O., Martinu, L., Dubois, C., & Skorobogatiy, M. A. (2006) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2006.0271 · Cited by 72
Self-citation
Cited by
Yetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752
Self-citationPhotonic crystal fiber based plasmonic sensors
Rifat, A. A., Ahmed, R., Yetisen, A. K., Butt, H., Sabouri, A., Mahdiraji, G. A., Yun, S. H., & Adikan, F. R. M. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.11.113 · Cited by 476
Advances in Plasmonic Technologies for Point of Care Applications
Tokel, O., Inci, F., & Demirci, U. (2014) · Chemical Reviews · doi:10.1021/cr4000623 · Cited by 407
Numerical Analysis of a Photonic Crystal Fiber for Biosensing Applications
Akowuah, E. K., Gorman, T., Ademgil, H., Haxha, S., Robinson, G. K., & Oliver, J. V. (2012) · IEEE Journal of Quantum Electronics · doi:10.1109/jqe.2012.2213803 · Cited by 378
Metadata
- Authors
- Gauvreau, B., Hassani, A., Fassi Fehri, M., Kabashin, A., & Skorobogatiy, M. A.
- Venue
- Optics Express
- Publisher
- Optica Publishing Group
- Published
- 2007
- Volume
- 15
- Issue
- 18
- Pages
- 11413
- ISSN
- 1094-4087 (ISSN-L)
- OpenAlex
- W2072825027
- Cited by
- 296
- References
- 9
- FWCI
- 11.97
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Photonic bandgap fiber-based Surface Plasmon Resonance sensors. https://app.cochat.ai/papers/10.1364/oe.15.011413
- The paper
- Gauvreau, B., Hassani, A., Fassi Fehri, M., Kabashin, A., & Skorobogatiy, M. A. (2007). Photonic bandgap fiber-based Surface Plasmon Resonance sensors. Optics Express. https://doi.org/10.1364/oe.15.011413
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.