The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
High speed laser drilling of metals using a high repetition rate, high average power ultrafast fiber CPA system
Open accessAbstract
We present an experimental study on the drilling of metal targets with ultrashort laser pulses at high repetition rates (from 50 kHz up to 975 kHz) and high average powers (up to 68 Watts), using an ytterbium-doped fiber CPA system. The number of pulses to drill through steel and copper sheets with thicknesses up to 1 mm have been measured as a function of the repetition rate and the pulse energy. Two distinctive effects, influencing the drilling efficiency at high repetition rates, have been experimentally found and studied: particle shielding and heat accumulation. While the shielding of subsequent pulses due to the ejected particles leads to a reduced ablation efficiency, this effect is counteracted by heat accumulation. The experimental data are in good qualitative agreement with simulations of the heat accumulation effect and previous studies on the particle emission. However, for materials with a high thermal conductivity as copper, both effects are negligible for the investigated processing parameters. Therefore, the full power of the fiber CPA system can be exploited, which allows to trepan high-quality holes in 0.5mm-thick copper samples with breakthrough times as low as 75 ms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrafast optical parametric amplifiers
Cerullo, G., & De Silvestri, S. (2003) · Review of Scientific Instruments · doi:10.1063/1.1523642 · Cited by 965
Dubietis, A., Jonušauskas, G., & Piskarskas, A. (1992) · Optics Communications · doi:10.1016/0030-4018(92)90070-8 · Cited by 893
Ross, I. N., Matousek, P., Towrie, M., Langley, A. J., & Collier, J. L. (1997) · Optics Communications · doi:10.1016/s0030-4018(97)00399-4 · Cited by 577
Zettawatt-exawatt lasers and their applications in ultrastrong-field physics
Tajima, T., & Mourou, G. (2002) · Physical Review Special Topics - Accelerators and Beams · doi:10.1103/physrevstab.5.031301 · Cited by 264
Analysis and optimization of optical parametric chirped pulse amplification
Ross, I. N., Matousek, P., New, G. H. C., & Osvay, K. (2002) · Journal of the Optical Society of America B · doi:10.1364/josab.19.002945 · Cited by 255
Defining the effective radius of curvature for a nonideal optical beam
Siegman, A. E. (1991) · IEEE Journal of Quantum Electronics · doi:10.1109/3.83370 · Cited by 173
35 J broadband femtosecond optical parametric chirped pulse amplification system
Chekhlov, O. V., Collier, J. L., Ross, I. N., Bates, P. K., Notley, M., Hernandez–Gomez, C., Shaikh, W., Danson, C. N., Neely, D., Matousek, P., et al. (2006) · Optics Letters · doi:10.1364/ol.31.003665 · Cited by 131
90 mJ parametric chirped pulse amplification of 10 fs pulses
Tavella, F., Marcinkevičius, A., & Krausz, F. (2006) · Optics Express · doi:10.1364/oe.14.012822 · Cited by 129
Phase modulation in second-order nonlinear-optical processes
Bakker, H. J., Planken, P. C. M., Kuipers, L., et al. (1990) · Physical Review A · doi:10.1103/physreva.42.4085 · Cited by 99
High-energy femtosecond pulse amlification in a quasi-phase-matched parametric amplifier
Galvanauskas, A., Hariharan, A., Harter, D. J., et al. (1998) · Optics Letters · doi:10.1364/ol.23.000210 · Cited by 81
Cited by
Ablation-cooled material removal with ultrafast bursts of pulses
Kerse, C., Kalaycıoğlu, H., Elahi, P., Çetin, B., Kesim, D. K., Akçaalan, Ö., Yavaş, S., Aşık, M. D., Öktem, B., Hoogland, H., et al. (2016) · Nature · doi:10.1038/nature18619 · Cited by 978
Laser Beam MicroMachining (LBMM) – A review
Mishra, S., & Yadava, V. (2015) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2015.03.017 · Cited by 261
Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers
Ancona, A., Döring, S., Jauregui, C., Röser, F., Limpert, J., Nolte, S., & Tünnermann, A. (2009) · Optics Letters · doi:10.1364/ol.34.003304 · Cited by 222
Self-citationSurface Structuring with Ultra-short Laser Pulses: Basics, Limitations and Needs for High Throughput
Neuenschwander, B., Jaeggi, B., Schmid, M., & Hennig, G. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.017 · Cited by 194
Pulsed Laser Ablation of Zinc in Tetrahydrofuran: Bypassing the Cavitation Bubble
Wagener, P., Schwenke, A., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911243a · Cited by 133
Metadata
- Authors
- Ancona, A., Röser, F., Rademaker, K., Limpert, J., Nolte, S., & Tünnermann, A.
- Venue
- Optics Express
- Publisher
- Optica Publishing Group
- Published
- 2008-06-03
- Volume
- 16
- Issue
- 12
- Pages
- 8958
- ISSN
- 1094-4087 (ISSN-L)
- OpenAlex
- W2077080965
- Cited by
- 257
- References
- 12
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High speed laser drilling of metals using a high repetition rate, high average power ultrafast fiber CPA system. https://app.cochat.ai/papers/10.1364/oe.16.008958
- The paper
- Ancona, A., Röser, F., Rademaker, K., Limpert, J., Nolte, S., & Tünnermann, A. (2008). High speed laser drilling of metals using a high repetition rate, high average power ultrafast fiber CPA system. Optics Express. https://doi.org/10.1364/oe.16.008958
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.