Design of a Si-based lattice-matched room-temperature GeSn/GeSiSn multi-quantum-well mid-infrared laser diode
Open accessThe DOI matches its Crossref record.
Abstract
This paper presents modeling and simulation of a silicon-based group IV semiconductor injection laser diode in which the active region has a multiple quantum well structure formed with Ge(0.9)Sn(0.1) quantum wells separated by Ge(0.75)Si(0.1)Sn(0.15) barriers. These alloy compositions were chosen to satisfy three conditions simultaneously: a direct band gap for Ge(0.9)Sn(0.1), type-I band alignment between Ge(0.9)Sn(0.1) and Ge(0.75)Si(0.1)Sn(0.15,) and a lattice match between wells and barriers. This match ensures that the entire structure can be grown strain free upon a relaxed Ge(0.75)Si(0.1)Sn(0.15) buffer on a silicon substrate - a CMOS compatible process. Detailed analysis is performed for the type I band offsets, carrier lifetime, optical confinement, and modal gain. The carrier lifetime is found to be dominated by the spontaneous radiative process rather than the Auger process. The modal gain has a rather sensitive dependence on the number of quantum wells in the active region. The proposed laser is predicted to operate at 2.3 μm in the mid infrared at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lü, T.-Y., Liao, X.-X., Wang, H.-Q., & Zheng, J.-C. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30915g · Cited by 260
Optically Pumped GeSn Microdisk Lasers on Si
Stange, D., Wirths, S., Geiger, R., Schulte-Braucks, C., Marzban, B., von den Driesch, N., Mussler, G., Zabel, T., Stoica, T., Hartmann, J.-M., et al. (2016) · ACS Photonics · doi:10.1021/acsphotonics.6b00258 · Cited by 252
The Emergence of Silicon Photonics as a Flexible Technology Platform
Chen, X., Milosevic, M. M., Stankovic, S., Reynolds, S., Bucio, T. D., Li, K., Thomson, D. J., Gardes, F., & Reed, G. T. (2018) · Proceedings of the IEEE · doi:10.1109/jproc.2018.2854372 · Cited by 247
“Germanium–silicon–tin (Ge1-x-ySixSny) has recently emerged as a promising material for low-temperature growth on silicon [215], [216], but further improvements are needed to achieve a direct bandgap in this material.”
BackgroundGeSn/Ge heterostructure short-wave infrared photodetectors on silicon
Gassenq, A., Gencarelli, F., Van Campenhout, J., Shimura, Y., Loo, R., Narcy, G., Vincent, B., & Roelkens, G. (2012) · Optics Express · doi:10.1364/oe.20.027297 · Cited by 196
Silicon-Based Photonic Integration Beyond the Telecommunication Wavelength Range
Roelkens, G., Dave, U., Gassenq, A., Hattasan, N., Hu, C., Kuyken, B., Leo, F., Malik, A., Muneeb, M., Ryckeboer, E., et al. (2014) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2013.2294460 · Cited by 134
“rect (and direct) bandgap of germanium reduces when adding tin to the matrix [29].”
BackgroundGeSn p-i-n waveguide photodetectors on silicon substrates
Peng, Y.-H., Cheng, H. H., Mashanov, V. I., & Chang, G.-E. (2014) · Applied Physics Letters · doi:10.1063/1.4903881 · Cited by 98
Self-citation
Metadata
- Authors
- Sun, G., Soref, R. A., & Cheng, H. H.
- Venue
- Optics Express
- Publisher
- Optica Publishing Group
- Published
- 2010-09-03
- Volume
- 18
- Issue
- 19
- Pages
- 19957
- ISSN
- 1094-4087 (ISSN-L)
- OpenAlex
- W1998267501
- Cited by
- 147
- References
- 0
- FWCI
- 7.23
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.