Low-loss waveguides on Y-cut thin film lithium niobate: towards acousto-optic applications
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
We investigate the dependence of photonic waveguide propagation loss on the thickness of the buried oxide layer in Y-cut lithium niobate on insulator substrate to identify trade-offs between optical losses and electromechanical coupling of surface acoustic wave (SAW) devices for acousto-optic applications. Simulations show that a thicker oxide layer reduces the waveguide loss but lowers the electromechanical coupling coefficient of the SAW device. Optical racetrack resonators with different lengths were fabricated by argon plasma etching to experimentally extract waveguide losses. By increasing the oxide layer thickness from 1 µm to 2 µm, we were able to reduce propagation loss of 2 µm (1 µm) wide waveguide from 1.85 dB/cm (3 dB/cm) to as low as 0.37 dB/cm (0.77 dB/cm). Resonators with a quality factor greater than 1 million were demonstrated as well. An oxide thickness of approximately 1.5 µm is sufficient to significantly reduce propagation loss, due to leakage into the substrate and simultaneously attain good electromechanical coupling in acoustic devices. This work not only provides insights on the design and realization of low-loss photonic waveguides in lithium niobate, but also, most importantly, offers experimental evidence of how the oxide thickness directly impacts losses and guides its selection for the synthesis of high-performance acousto-optic devices in Y-cut lithium niobate on insulator.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Monolithic ultra-high-Q lithium niobate microring resonator
Zhang, M., Wang, C., Cheng, R., Shams-Ansari, A., & Lončar, M. (2017) · Optica · doi:10.1364/optica.4.001536 · Cited by 878
Lithium niobate on insulator (LNOI) for micro‐photonic devices
Poberaj, G., Hu, H., Sohler, W., & Günter, P. (2012) · Laser & Photonics Reviews · doi:10.1002/lpor.201100035 · Cited by 631 · cited 1×
“effects with respect to implementations in the bulk material [6].”
BackgroundWeigel, P. O., Zhao, J., Fang, K., Al-Rubaye, H., Trotter, D., Hood, D., Mudrick, J., Dallo, C., Pomerene, A. T., Starbuck, A. L., et al. (2018) · Optics Express · doi:10.1364/oe.26.023728 · Cited by 338
Hybrid silicon and lithium niobate electro-optical ring modulator
Chen, L., Xu, Q., Wood, M. G., & Reano, R. M. (2014) · Optica · doi:10.1364/optica.1.000112 · Cited by 276
Highly tunable efficient second-harmonic generation in a lithium niobate nanophotonic waveguide
Luo, R., He, Y., Liang, H., Li, M., & Lin, Q. (2018) · Optica · doi:10.1364/optica.5.001006 · Cited by 255 · cited 1×
“the lowest propagation loss reported so far for dry-etched LNOI waveguides with similar dimensions and without any over-cladding oxide layer [27].”
BackgroundSum-frequency generation in on-chip lithium niobate microdisk resonators
Hao, Z., Wang, J., Ma, S., Mao, W., Bo, F., Gao, F., Zhang, G., & Xu, J. (2017) · Photonics Research · doi:10.1364/prj.5.000623 · Cited by 73 · cited 1×
“variety of applications [7-15].”
Second-harmonic generation in single-mode integrated waveguides based on mode-shape modulation
Rao, A., Chiles, J., Khan, S., Toroghi, S., Malinowski, M., Camacho-González, G. F., & Fathpour, S. (2017) · Applied Physics Letters · doi:10.1063/1.4978696 · Cited by 55
Mahmoud, M., Mahmoud, A., Cai, L., Khan, M., Mukherjee, T., Bain, J., & Piazza, G. (2018) · Optics Express · doi:10.1364/oe.26.025060 · Cited by 44
Self-citationGrowth of crystalline LiF on CF4 plasma etched LiNbO3 substrates
Nagata, H., Mitsugi, N., Shima, K., Tamai, M., & Haga, E. M. (1998) · Journal of Crystal Growth · doi:10.1016/s0022-0248(98)00009-8 · Cited by 36
Cited by
Integrated photonics on thin-film lithium niobate
Zhu, D., Shao, L., Yu, M., Cheng, R., Desiatov, B., Xin, C. J., Hu, Y., Holzgrafe, J., Ghosh, S., Shams-Ansari, A., et al. (2021) · Advances in Optics and Photonics · doi:10.1364/aop.411024 · Cited by 1,516
Acousto-optical modulation of thin film lithium niobate waveguide devices
Cai, L., Mahmoud, A., Khan, M., Mahmoud, M., Mukherjee, T., Bain, J., & Piazza, G. (2019) · Photonics Research · doi:10.1364/prj.7.001003 · Cited by 140
Self-citationLinear isolators using wavelength conversion
Abdelsalam, K., Li, T., Khurgin, J. B., & Fathpour, S. (2020) · Optica · doi:10.1364/optica.385639 · Cited by 53
Realization of alignment-tolerant grating couplers for z-cut thin-film lithium niobate
Kar, A., Bahadori, M., Gong, S., & Goddard, L. L. (2019) · Optics Express · doi:10.1364/oe.27.015856 · Cited by 50
Metadata
- Authors
- Cai, L., Mahmoud, A., & Piazza, G.
- Venue
- Optics Express
- Publisher
- Optica Publishing Group
- Published
- 2019-03-22
- Volume
- 27
- Issue
- 7
- Pages
- 9794
- ISSN
- 1094-4087 (ISSN-L)
- OpenAlex
- W2921350995
- Cited by
- 52
- References
- 9
- FWCI
- 2.78
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.