Eavesdropping time and frequency: phase noise cancellation along a time-varying path, such as an optical fiber
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Single-mode optical fiber is a highly efficient connecting medium used not only for optical telecommunications but also for the dissemination of ultrastable frequencies or timing signals. Ma et al. [Opt. Lett.19, 1777 (1994)] described a measurement and control system to deliver the same optical frequency at two places, namely the two ends of a fiber, by eliminating the "fiber-induced phase-noise modulation, which corrupts high-precision frequency-based applications." I present a simple detection and control scheme to deliver the same optical frequency at many places anywhere along a transmission path, or in its vicinity, with a relative instability of 1 part in 10(19). The same idea applies to radio frequency and timing signals. This considerably simplifies future efforts to make precise timing or frequency signals available to many users, as required in some large-scale science experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An optical lattice clock with accuracy and stability at the 10−18 level
Bloom, B. J., Nicholson, T. L., Williams, J. R., Campbell, S. L., Bishof, M., Zhang, X., Zhang, W., Bromley, S. L., & Ye, J. (2014) · Nature · doi:10.1038/nature12941 · Cited by 1,073
An Atomic Clock with 10 –18 Instability
Hinkley, N., Sherman, J. A., Phillips, N. B., Schioppo, M., Lemke, N. D., Beloy, K., Pizzocaro, M., Oates, C. W., & Ludlow, A. D. (2013) · Science · doi:10.1126/science.1240420 · Cited by 817
Ma, L.-S., Jungner, P., Ye, J., & Hall, J. L. (1994) · Optics Letters · doi:10.1364/ol.19.001777 · Cited by 566
A 920-Kilometer Optical Fiber Link for Frequency Metrology at the 19th Decimal Place
Predehl, K., Grosche, G., Raupach, S. M. F., Droste, S., Terra, O., Alnis, J., Legero, T., Hänsch, T. W., Udem, T., Holzwarth, R., et al. (2012) · Science · doi:10.1126/science.1218442 · Cited by 543
Self-citationUltra-stable long distance optical frequency distribution using the Internet fiber network
Lopez, O., Haboucha, A., Chanteau, B., Chardonnet, C., Amy-Klein, A., & Santarelli, G. (2012) · Optics Express · doi:10.1364/oe.20.023518 · Cited by 175
Simultaneous remote transfer of accurate timing and optical frequency over a public fiber network
Lopez, O., Kanj, A., Pottie, P.-E., Rovera, D., Achkar, J., Chardonnet, C., Amy-Klein, A., & Santarelli, G. (2013) · Applied Physics B · doi:10.1007/s00340-012-5241-0 · Cited by 168
Cited by
Geodesy and metrology with a transportable optical clock
Grotti, J., Koller, S., Vogt, S., Häfner, S., Sterr, U., Lisdat, C., Denker, H., Voigt, C., Timmen, L., Rolland, A., et al. (2018) · Nature Physics · doi:10.1038/s41567-017-0042-3 · Cited by 495
The CIPM list of recommended frequency standard values: guidelines and procedures
Riehle, F., Gill, P., Arias, F., & Robertsson, L. (2018) · Metrologia · doi:10.1088/1681-7575/aaa302 · Cited by 281
Riehle, F. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.235 · Cited by 264
Mehlstäubler, T. E., Grosche, G., Lisdat, C., Schmidt, P. O., & Denker, H. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aab409 · Cited by 263
“For geodetic applications, such a portable system can be operated along the route of existing fibre links and there be connected by frequency extraction (Grosche 2014) to another optical clock that is typically found at the end of such a link.”
InfluentialSelf-citationTest of Special Relativity Using a Fiber Network of Optical Clocks
Delva, P., Lodewyck, J., Bilicki, S., Bookjans, E., Vallet, G., Le Targat, R., Pottie, P.-E., Guerlin, C., Meynadier, F., Le Poncin-Lafitte, C., et al. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.221102 · Cited by 227
Self-citation
Metadata
- Authors
- Grosche, G.
- Venue
- Optics Letters
- Publisher
- Optica Publishing Group
- Published
- 2014-04-17
- Volume
- 39
- Issue
- 9
- Pages
- 2545
- ISSN
- 0146-9592 (ISSN-L)
- 1539-4794
- OpenAlex
- W1969509320
- Cited by
- 72
- References
- 6
- FWCI
- 5.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Eavesdropping time and frequency: phase noise cancellation along a time-varying path, such as an optical fiber. https://app.cochat.ai/papers/10.1364/ol.39.002545
- The paper
- Grosche, G. (2014). Eavesdropping time and frequency: phase noise cancellation along a time-varying path, such as an optical fiber. Optics Letters. https://doi.org/10.1364/ol.39.002545
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.