The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Open-Source Syringe Pump Library
Open accessAbstract
This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory. A syringe pump was designed using freely available open-source computer aided design (CAD) software and manufactured using an open-source RepRap 3-D printer and readily available parts. The design, bill of materials and assembly instructions are globally available to anyone wishing to use them. Details are provided covering the use of the CAD software and the RepRap 3-D printer. The use of an open-source Rasberry Pi computer as a wireless control device is also illustrated. Performance of the syringe pump was assessed and the methods used for assessment are detailed. The cost of the entire system, including the controller and web-based control interface, is on the order of 5% or less than one would expect to pay for a commercial syringe pump having similar performance. The design should suit the needs of a given research activity requiring a syringe pump including carefully controlled dosing of reagents, pharmaceuticals, and delivery of viscous 3-D printer media among other applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
TrakEM2 Software for Neural Circuit Reconstruction
Cardona, A., Saalfeld, S., Schindelin, J., Arganda-Carreras, I., Preibisch, S., Longair, M., Tomancak, P., Hartenstein, V., & Douglas, R. J. (2012) · PLoS ONE · doi:10.1371/journal.pone.0038011 · Cited by 1,013
Reinventing discovery: the new era of networked science
(2012) · Choice Reviews Online · doi:10.5860/choice.49-4420 · Cited by 645
Building Research Equipment with Free, Open-Source Hardware
Pearce, J. M. (2012) · Science · doi:10.1126/science.1228183 · Cited by 561
Self-citationImaging of Plasmodium Liver Stages to Drive Next-Generation Antimalarial Drug Discovery
Meister, S., Plouffe, D. M., Kuhen, K. L., Bonamy, G. M. C., Wu, T., Barnes, S. W., Bopp, S. E., Borboa, R., Bright, A. T., Che, J., et al. (2011) · Science · doi:10.1126/science.1211936 · Cited by 338
3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development
Pearce, J. M., Morris Blair, C., Laciak, K. J., Andrews, R., Nosrat, A., & Zelenika-Zovko, I. (2010) · Journal of Sustainable Development · doi:10.5539/jsd.v3n4p17 · Cited by 271
Self-citationOpen science is a research accelerator
Woelfle, M., Olliaro, P., & Todd, M. H. (2011) · Nature Chemistry · doi:10.1038/nchem.1149 · Cited by 260
(2014) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.1016/c2012-0-07249-3 · Cited by 214
Open-Source 3D-Printable Optics Equipment
Zhang, C., Anzalone, N. C., Faria, R. P., et al. (2013) · PLoS ONE · doi:10.1371/journal.pone.0059840 · Cited by 197
Kitson, P. J., Symes, M. D., Dragone, V., & Cronin, L. (2013) · Chem. Sci. · doi:10.1039/c3sc51253c · Cited by 180
Advancing Global Health Research Through Digital Technology and Sharing Data
Lang, T. A. (2011) · Science · doi:10.1126/science.1199349 · Cited by 96
Cited by
Xavier, M. S., Tawk, C. D., Zolfagharian, A., Pinskier, J., Howard, D., Young, T., Lai, J., Harrison, S. M., Yong, Y. K., Bodaghi, M., et al. (2022) · IEEE Access · doi:10.1109/access.2022.3179589 · Cited by 418
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
Handheld skin printer: in situ formation of planar biomaterials and tissues
Hakimi, N., Cheng, R., Leng, L., Sotoudehfar, M., Ba, P. Q., Bakhtyar, N., Amini-Nik, S., Jeschke, M. G., & Günther, A. (2018) · Lab on a Chip · doi:10.1039/c7lc01236e · Cited by 259
C-FLAT: Control-Flow Attestation for Embedded Systems Software
Abera, T., Asokan, N., Davi, L., Ekberg, J.-E., Nyman, T., Paverd, A., Sadeghi, A.-R., & Tsudik, G. (2016) · Proceedings of the 2016 ACM SIGSAC Conference on Computer and Communications Security · doi:10.1145/2976749.2978358 · Cited by 258
Public understanding of climate change terminology
Bruine de Bruin, W., Rabinovich, L., Weber, K., Babboni, M., Dean, M., & Ignon, L. (2021) · Climatic Change · doi:10.1007/s10584-021-03183-0 · Cited by 62
Metadata
- Authors
- Wijnen, B., Hunt, E. J., Anzalone, G. C., & Pearce, J. M.
- Venue
- PLoS ONE
- Publisher
- Public Library of Science (PLoS)
- Published
- 2014-09-17
- Volume
- 9
- Issue
- 9
- Pages
- e107216
- ISSN
- 1932-6203 (ISSN-L)
- OpenAlex
- W1972111566
- Cited by
- 280
- References
- 18
- FWCI
- 22.47
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Open-Source Syringe Pump Library. https://app.cochat.ai/papers/10.1371/journal.pone.0107216
- The paper
- Wijnen, B., Hunt, E. J., Anzalone, G. C., & Pearce, J. M. (2014). Open-Source Syringe Pump Library. PLoS ONE. https://doi.org/10.1371/journal.pone.0107216
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.