The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Effects of Terrain Morphology, Sampling Density, and Interpolation Methods on Grid DEM Accuracy
Open accessAbstract
This paper explores the effects of terrain morphology, sampling density, and interpolation methods for scattered sample data on the accuracy of interpolated heights in grid Digital Elevation Models (DEM). Sampled data were collected with a 2 by 2 meters sampling interval from seven different morphologies, applying digital photogrammetric methods to large scale aerial stereo imagery (1:5000). The experimen- tal design was outlined using a factorial scheme, and an analysis of variance was carried out. This analysis yielded the following main conclusions: DEM accuracy (RMSE) is affected significantly by the variables studied in this paper according to morphologysampling densityinterpola- tion method. Multiquadric Radial Basis Function (RBF) was rated as the best interpolation method, although Multilog RBF performed similarly for most morphologies. The rest of RBF interpolants tested (Natural Cubic Splines, Inverse Multiquadric, and Thin Plate Splines) showed numerical instability working with low smoothing factors. Inverse Distance Weighted interpolant performed worse than RBF Multiquadric or RBF Multilog. In addition, it is found that the relationship between the RMSE and the sampling density N is adjusted to a decreasing potential function that may be expressed as RMSE/Sdz � 0.1906(N/M) � 0.5684 (R 2 � 0.8578), being Sdz the standard deviation of the heights of the M check points used for accuracy estimation, and N the number of sampling points used for creating the DEM. The results obtained in this study allow us to observe the possibility of establishing empirical relationships between the RMSE expected in the interpolation of a Grid DEM and such variables as terrain ruggedness, sampling density, and the interpolation method, among others that could be added. Therefore, it would be possible to establish a priori the optimum grid size required to generate or storage a DEM of a particular accuracy, with the economy in computing time and file size that this would signify for the digital flow of the mapping information.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of geographical information systems
BURROUGH, P. A., & McDonnell, R. A. (1998) · Cited by 4,082
Multiquadric equations of topography and other irregular surfaces
Hardy, R. L. (1971) · Journal of Geophysical Research Atmospheres · doi:10.1029/jb076i008p01905 · Cited by 2,811
Scattered data interpolation: tests of some methods
Franke, R. (1982) · Mathematics of Computation · doi:10.1090/s0025-5718-1982-0637296-4 · Cited by 1,895
Spatial Interpolation Methods: A Review
Lam, N. S.-N. (1983) · The American Cartographer · doi:10.1559/152304083783914958 · Cited by 940
Digital Elevation Model Technologies and Applications : The Dem Users Manual
Maune, D. F. (2019) · Cited by 628
The geomorphological characterisation of Digital Elevation Models
Wood, J. (1996) · Figshare · Cited by 503
Interpolation by regularized spline with tension: I. Theory and implementation
Helena Mitasova, A., & Mitáš, L. (1993) · Mathematical Geology · doi:10.1007/bf00893171 · Cited by 444
Mitášová, H., & Hofierka, J. (1993) · Mathematical Geology · doi:10.1007/bf00893172 · Cited by 380
Voltz, M., & Webster, R. (1990) · Journal of Soil Science · doi:10.1111/j.1365-2389.1990.tb00080.x · Cited by 374
The Fractal Nature of Geographic Phenomena
Goodchild, M. F., & Mark, D. M. (1987) · Annals of the Association of American Geographers · doi:10.1111/j.1467-8306.1987.tb00158.x · Cited by 344
Cited by
Chaplot, V., Darboux, F., Bourennane, H., Leguédois, S., Silvera, N., & Phachomphon, K. (2006) · Geomorphology · doi:10.1016/j.geomorph.2005.12.010 · Cited by 402
Effects of Topographic Variability and Lidar Sampling Density on Several DEM Interpolation Methods
Guo, Q., Li, W., Yu, H., & Alvarez, O. (2010) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.76.6.701 · Cited by 314
Modelling vertical error in LiDAR-derived digital elevation models
Aguilar, F. J., Mills, J. P., Delgado, J., Aguilar, M. A., Negreiros, J. G., & Pérez, J. L. (2010) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2009.09.003 · Cited by 106
Self-citationAccuracy validation and comparison of global digital elevation models over Croatia
Varga, M., & Bašić, T. (2015) · International Journal of Remote Sensing · doi:10.1080/01431161.2014.994720 · Cited by 78
Thomas, J., Joseph, S., Thrivikramji, K. P., & Arunkumar, K. S. (2014) · Geoscience Frontiers · doi:10.1016/j.gsf.2013.12.008 · Cited by 67
Metadata
- Authors
- Aguilar, F. J., Agüera, F., Aguilar, M. A., & Carvajal, F.
- Venue
- Photogrammetric Engineering & Remote Sensing
- Published
- 2005-07-01
- Volume
- 71
- Issue
- 7
- Pages
- 805-816
- ISSN
- 0099-1112 (ISSN-L)
- OpenAlex
- W2120612314
- Cited by
- 322
- References
- 24
- FWCI
- 16.32
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Terrain Morphology, Sampling Density, and Interpolation Methods on Grid DEM Accuracy. https://app.cochat.ai/papers/10.14358/pers.71.7.805
- The paper
- Aguilar, F. J., Agüera, F., Aguilar, M. A., & Carvajal, F. (2005). Effects of Terrain Morphology, Sampling Density, and Interpolation Methods on Grid DEM Accuracy. Photogrammetric Engineering & Remote Sensing. https://doi.org/10.14358/pers.71.7.805
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.