The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
An architecture of an Intelligent Digital Twin in a Cyber-Physical Production System
Open accessAbstract
Abstract The role of a Digital Twin is increasingly discussed within the context of Cyber-Physical Production Systems. Accordingly, various architectures for the realization of Digital Twin use cases are conceptualized. There lacks, however, a clear, encompassing architecture covering necessary components of a Digital Twin to realize various use cases in an intelligent automation system. In this contribution, the added value of a Digital Twin in an intelligent automation system is highlighted and various existing definitions and architectures of the Digital Twin are discussed. Flowingly, an architecture for a Digital Twin and an architecture for an Intelligent Digital Twin and their required components are proposed, with which use cases such as plug and produce, self-x and predictive maintenance are enabled. In the opinion of the authors, a Digital Twin requires three main characteristics: synchronization with the real asset, active data acquisition from the real environment and the ability of simulation. In addition to all the characteristics of a Digital Twin, an Intelligent Digital Twin must also include the characteristics of Artificial Intelligence. The Intelligent Digital Twin can be used for the realization of the autonomous Cyber-Physical Production Systems. In order to realize the proposed architecture for a Digital Twin, several methods, namely the Anchor-Point-Method, a method for heterogeneous data acquisition and data integration as well as an agent-based method for the development of a co-simulation between Digital Twins were implemented and evaluated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This allows for the adaptation of existing models or adjustments based on the real asset's interactions with its environment [103].”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [103]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cyber Physical Systems: Design Challenges
Lee, E. A. (2008) · IEEE International Symposium on Real-Time Distributed Computing (ISORC) · doi:10.1109/isorc.2008.25 · Cited by 3,638
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612 · cited 2×
“In [9] several definitions ofDigital Twins are compared and evaluated.”
BackgroundMethodAbout The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474 · cited 1×
“During the mission, theground-basedmodelwasused to simulate alternatives, where the available flight datawas used to reflect the flight conditions as accurately as possible and to assist astronauts in orbit in critical situations [6, 7].”
MethodDigital Twin—The Simulation Aspect
Boschert, S., & Rosen, R. (2016) · Mechatronic Futures · doi:10.1007/978-3-319-32156-1_5 · Cited by 1,158
Haag, S., & Anderl, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.006 · Cited by 559
Datenaustausch in der Anlagenplanung mit AutomationML
Draht, R. (2010) · Springer eBooks · doi:10.1007/978-3-642-04674-2 · Cited by 140
Predictive Analytics Model for Power Consumption in Manufacturing
Shin, S., Woo, J., & Rachuri, S. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.06.036 · Cited by 139
Modellbasierte virtuelle Produktentwicklung
Eigner, M., Roubanov, D., & Zafirov, R. (2014) · Springer eBooks · doi:10.1007/978-3-662-43816-9 · Cited by 134
Consistency check to synchronize the Digital Twin of manufacturing automation based on anchor points
Talkhestani, B. A., Jazdi, N., Schloegl, W., & Weyrich, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.166 · Cited by 119
Self-citationRibeiro, L., & Bjorkman, M. (2017) · IEEE Systems Journal · doi:10.1109/jsyst.2017.2771139 · Cited by 101
Anomaly detection in discrete manufacturing using self-learning approaches
Lindemann, B., Fesenmayr, F., Jazdi, N., & Weyrich, M. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.073 · Cited by 86
Self-citationArchitectural aspects of digital twins in IIoT systems
Malakuti, S., & Grüner, S. (2018) · Proceedings of the 12th European Conference on Software Architecture: Companion Proceedings · doi:10.1145/3241403.3241417 · Cited by 74
Modellbasierte Virtuelle Produktentwicklung
Eigner, M., Roubanov, D., & Zafirov, R. (2014) · Springer eBooks · doi:10.1007/978-3-662-45874-7 · Cited by 64
Talkhestani, B. A., Jazdi, N., Schlögl, W., & Weyrich, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.12.168 · Cited by 56
Self-citationFeldmann, S., Kernschmidt, K., & Vogel‐Heuser, B. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.01.140 · Cited by 55
Biesinger, F., Meike, D., Krass, B., & Weyrich, M. (2018) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2018.8502467 · Cited by 52
Self-citationKeeping the digital twin up-to-date — Process monitoring to identify changes in a plant
Zipper, H., Auris, F., Strahilov, A., & Paul, M. (2018) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2018.8352419 · Cited by 43
Dynamic Co-Simulation of Internet-of-Things-Components using a Multi-Agent-System
Jung, T., Shah, P., & Weyrich, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.084 · Cited by 26
Self-citationAutomating Cross-Disciplinary Defect Detection in Multi-disciplinary Engineering Environments
Kovalenko, O., Serral, E., Sabou, M., Ekaputra, F. J., Winkler, D., & Biffl, S. (2014) · Lecture notes in computer science · doi:10.1007/978-3-319-13704-9_19 · Cited by 22
Framework and Conceptual Model for Reconfiguration
Männistö, T., Soininen, T., Tiihonen, J., & Sulonen, R. (1999) · Cited by 19
Cloud-based Control Approach in Discrete Manufacturing Using a Self-Learning Architecture
Lindemann, B., Karadoğan, C., Jazdi, N., Liewald, M., & Weyrich, M. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.06.255 · Cited by 18
Self-citationProduct lifecycle management for cross-x engineering design
Bergsjö, D. H., Vielhaber, M., Malvius, D., Burr, H., & Malmqvist, J. (2007) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 17
Walla, W., & Kiefer, J. (2011) · Springer eBooks · doi:10.1007/978-3-642-19692-8_36 · Cited by 16
An Integrated Approach to Analyze Change-situations in the Development of Production Systems
Kernschmidt, K., Behncke, F. G. H., Chucholowski, N., Wickel, M. C., Bayrak, G., Lindemann, U., & Vogel‐Heuser, B. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.01.081 · Cited by 13
Makris, S., & Alexopoulos, K. (2012) · Procedia CIRP · doi:10.1016/j.procir.2012.05.033 · Cited by 12
Approach to interconnect existing industrial automation systems with the Industrial Internet
Faul, A., Jazdi, N., & Weyrich, M. (2016) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2016.7733750 · Cited by 12
Self-citationSynchronisierung von digitalen Modellen
Talkhestani, B. A., Schlögl, W., & Weyrich, M. (2017) · atp magazin · doi:10.17560/atp.v59i07-08.1902 · Cited by 12
Self-citationA survey on dynamic simulation of automation systems and components in the Internet of Things
Jung, T., Jazdi, N., & Weyrich, M. (2017) · 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2017.8247770 · Cited by 11
Self-citationIT-Lösungen für den Produktentwicklungsprozess
Eigner, M. (2017) · Springer eBooks · doi:10.1007/978-3-662-55426-5_24 · Cited by 7
Product Lifecycle Management (PLM) mit Siemens Teamcenter
Herbst, S., & Hoffmann, A. (2018) · doi:10.3139/9783446446496.fm · Cited by 6
Verification of programmable logic controller code using model checking and static analysis
Biallas, S., Fay, A., & Kowalewski, S. (2016) · RWTH Publications (RWTH Aachen) · Cited by 5
Synchronization of a “Plug-and-Simulate”-capable Co-Simulation of Internet-of-Things-Components
Jung, T., & Weyrich, M. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.090 · Cited by 4
Self-citationDynamische Co-Simulation von Automatisierungssystemen und ihren Komponenten im Internet der Dinge
Jung, T., Jazdi, N., & Weyrich, M. (2018) · VDI Verlag eBooks · doi:10.51202/9783181023303-745 · Cited by 4
Self-citationDurchgängiges mechatronisches Engineering für Sondermaschinen
Frank, G. (2016) · OPUS Publication Server of the University of Stuttgart (University of Stuttgart) · doi:10.18419/opus-8761 · Cited by 3
Feldmann, S., Kernschmidt, K., & Vogel‐Heuser, B. (2016) · at - Automatisierungstechnik · doi:10.1515/auto-2015-0081 · Cited by 2
Marks, P., & Weyrich, M. (2017) · VDI Verlag eBooks · doi:10.51202/9783181022931-119 · Cited by 2
Self-citationLindemann, B., Jazdi, N., & Weyrich, M. (2018) · VDI Verlag eBooks · doi:10.51202/9783181023303-1 · Cited by 2
Self-citationUlewicz, S., Feldmann, S., Vogel‐Heuser, B., & Diehm, S. (2016) · VDI Verlag eBooks · doi:10.51202/9783181022849-15 · Cited by 1
Flagged first, then by citations
Research works printed but not linked: 3
- M. Schleipen and O. Sauer, “Use of dynamic product and process information in a production monitoring and control system by means of CAEX and OPC UA”, Proc. 3rd Int. Conf. Chang. Agil. Reconfigurable Virtual Prod., pp. 662–671, 2009.
- F. Bellalouna, “Integrationsplattform für eine interdisziplinäre Entwicklung mechatronischer Produkte, Dissertation”, Fakultät für Maschinenbau der Ruhr-Universität Bochum (2009).
- S. Feldmann and B. Vogel-Heuser, “Änderungsszenarien in der Automatisierungstechnik–Herausforderungen und interdisziplinäre Auswirkungen”, Eng. von der Anforderung bis zum Betr., vol. 3, p. 95, 2013.
Cited by
Sorted by citations
Digital Twin in the IoT Context: A Survey on Technical Features, Scenarios, and Architectural Models
Minerva, R., Lee, G. M., & Crespi, N. (2020) · Proceedings of the IEEE · doi:10.1109/jproc.2020.2998530 · Cited by 812
Digital Twin for maintenance: A literature review
Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103316 · Cited by 819
Digital Twin: A Comprehensive Survey of Security Threats
Alcaraz, C., & López, J. (2022) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2022.3171465 · Cited by 364
Digital Twin in Aerospace Industry: A Gentle Introduction
Li, L., Aslam, S., Wileman, A., & Perinpanayagam, S. (2021) · IEEE Access · doi:10.1109/access.2021.3136458 · Cited by 316
Delgado, J. M. D., & Oyedele, L. O. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2021.101332 · Cited by 272
Metadata
- Authors
- Ashtari Talkhestani, B., Jung, T., Lindemann, B., Sahlab, N., Jazdi, N., Schloegl, W., & Weyrich, M.
- Affiliations
- Institute of Industrial Automation and Software Engineering , University of Stuttgart , Pfaffenwaldring 47 , Stuttgart , Germany
- University of Stuttgart (DE)
- Siemens AG , Digital Factory Division, Product Lifecycle Management, Digital Engineering Automation Designer , Gleiwitzerstraße 555 , Nuremberg , Germany
- Venue
- at - Automatisierungstechnik
- Publisher
- Walter de Gruyter GmbH
- Published
- 2019-09-01
- Volume
- 67
- Issue
- 9
- Pages
- 762-782
- ISSN
- 0178-2312 (ISSN-L)
- 2196-677X
- OpenAlex
- W2977510036
- Cited by
- 300
- References
- 38
- Citations by year
- 2026: 13 · 2025: 35 · 2024: 56 · 2023: 62 · 2022: 59 · 2021: 53 · 2020: 19 · 2019: 3
- FWCI
- 24.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- at - Automatisierungstechnik (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, intelligent digital twins, cyber-physical production systems, digital twin architecture, intelligent automation, plug and produce, predictive maintenance, real-time synchronization, data acquisition, simulation, artificial intelligence, heterogeneous data integration, autonomous production systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
