The DOI matches its Crossref record.
Wettability of Heat-Treated Wood
Abstract
Summary: The aim of this work was to study the wettability and chemical composition of heat-treated wood. Heat treatment was performed at 240°C under inert atmosphere on four European wood species (pine, spruce, beech and poplar). Contact angle measurements before and after treatment indicated a significant increase in wood hydrophobicity. Advancing contact angles of a water drop were in all cases systematically higher for heat-treated than for untreated wood. Chemical modifications of wood after heat treatment were investigated using FTIR and 13 C NMR analysis. FTIR spectra indicated little structural change which could be attributed either to carbon-carbon double bond formation or to adsorbed water. NMR spectra also revealed little chemical change except for the degree of cellulose crystallinity which was considerably higher in heat-treated wood and could explain the higher contact angles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The wood from the trees: The use of timber in construction
Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.107 · Cited by 1,402
Wood modification by heat treatment: A review
Esteves, B. M., & Pereira, H. M. (2008) · BioResources · doi:10.15376/biores.4.1.370-404 · Cited by 1,270
Progress in biomass torrefaction: Principles, applications and challenges
Chen, W.-H., Lin, B.-J., Lin, Y.-Y., Chu, Y.-S., Ubando, A. T., Show, P. L., Ong, H. C., Chang, J.-S., Ho, S.-H., Culaba, A. B., et al. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100887 · Cited by 925
Self-citationInvestigation of wood wettability changes during heat treatment on the basis of chemical analysis
Hakkou, M., Pétrissans, M., Zoulalian, A., & Gérardin, P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.10.017 · Cited by 388
Self-citationInvestigations of the reasons for fungal durability of heat-treated beech wood
Hakkou, M., Pétrissans, M., Gérardin, P., & Zoulalian, A. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.042 · Cited by 346
Self-citationAn investigation of the grindability of two torrefied energy crops
Bridgeman, T. G., Jones, J. M., Williams, A., & Waldron, D. J. (2010) · Fuel · doi:10.1016/j.fuel.2010.06.043 · Cited by 319
Esteves, B., Marques, A. V., Domingos, I., & Pereira, H. (2007) · Wood Science and Technology · doi:10.1007/s00226-006-0099-0 · Cited by 304
Chaouch, M., Pétrissans, M., Pétrissans, A., & Gérardin, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.09.010 · Cited by 117
Self-citation
Metadata
- Authors
- Pétrissans, M., Gérardin, P., bakali, I. E., & Serraj, M.
- Venue
- Holzforschung
- Publisher
- Walter de Gruyter GmbH
- Published
- 2003-04-25
- Volume
- 57
- Issue
- 3
- Pages
- 301-307
- ISSN
- 0018-3830 (ISSN-L)
- OpenAlex
- W1978350365
- Cited by
- 226
- References
- 0
- FWCI
- 24.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.