The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Criteria for developing castable, creep-resistant aluminum-based alloys – A review
Abstract
We describe four criteria for the selection of alloying elements capable of producing castable, precipitation-strengthened Al alloys with high-temperature stability and strength: these alloying elements must (i) be capable of forming a suitable strengthening phase, (ii) show low solid solubility in Al, (iii) low diffusivity in Al, and (iv) retain the ability for the alloy to be conventionally solidified.With regard to criterion (i), we consider those systems forming Al 3 M trialuminide compounds with a cubic L1 2 crystal structure, which are chemically and structurally analogous to Ni 3 Al in the Ni-based superalloys. Eight elements, clustered in the same region of the periodic table, fulfill criterion (i): the first Group 3 transition metal (Sc), the three Group 4 transition metals (Ti, Zr, Hf) and the four latest lanthanide elements (Er, Tm, Yb, Lu). Based on a review of the existing literature, these elements are assessed in terms of criteria (ii) and (iii), which satisfy the need for a dispersion in Al with slow coarsening kinetics, and criterion (iv), which is discussed based on the binary phase diagrams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2016) · Alloy Phase Diagrams · doi:10.31399/asm.hb.v03.a0006247 · Cited by 16,046
The kinetics of precipitation from supersaturated solid solutions
Lifshitz, I. M., & Slyozov, V. V. (1961) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(61)90054-3 · Cited by 8,433
Numerical data and functional relationships in science and technology
Bechmann, R., Hearmon, R. F. S., & Kurtz, S. K. (1969) · Springer eBooks · Cited by 5,858
Smithells Metals Reference Book
(1992) · Elsevier eBooks · doi:10.1016/c2009-0-25363-3 · Cited by 3,613
Handbook of Chemistry and Physics.
Hodgman, C. D., & Lind, S. C. (1949) · The Journal of Physical and Colloid Chemistry · doi:10.1021/j150472a018 · Cited by 3,581
Flemings, M. C. (1974) · Metallurgical transactions · doi:10.1007/bf02643923 · Cited by 3,403
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
Shewmon, P. (2016) · Springer eBooks · doi:10.1007/978-3-319-48206-4 · Cited by 3,228
Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics
Frost, H. J., & Ashby, M. F. (1982) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,462
Fundamentals of Solidification: Fourth Revised Edition
Kurz, W., & Fisher, D. J. (1998) · Retrospective Collection · doi:10.4028/www.scientific.net/rc.35 · Cited by 1,955
Cited by
Thermal Stability of Aluminum Alloys
Czerwinski, F. (2020) · Materials · doi:10.3390/ma13153441 · Cited by 291
Sustainability through alloy design: Challenges and opportunities
Cann, J. L., De Luca, A., Dunand, D. C., Dye, D., Miracle, D. B., Oh, H. S., Olivetti, E. A., Pollock, T. M., Poole, W. J., Yang, R., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100722 · Cited by 191
Self-citation
Metadata
- Authors
- Knipling, K. E., Dunand, D. C., & Seidman, D. N.
- Venue
- International Journal of Materials Research
- Publisher
- Walter de Gruyter GmbH
- Published
- 2006-03-01
- Volume
- 97
- Issue
- 3
- Pages
- 246-265
- ISSN
- 0044-3093 (ISSN-L)
- 2195-8556
- 1862-5282
- OpenAlex
- W2160033828
- Cited by
- 812
- References
- 41
- FWCI
- 18.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Criteria for developing castable, creep-resistant aluminum-based alloys – A review. https://app.cochat.ai/papers/10.1515/ijmr-2006-0042
- The paper
- Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2022). Criteria for developing castable, creep-resistant aluminum-based alloys – A review. International Journal of Materials Research. https://doi.org/10.1515/ijmr-2006-0042
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.