CoChat

Dealloyed Core-Shell Fuel Cell Electrocatalysts

Strasser, Peter · 2009 · Reviews in Chemical Engineering
Cited by 102

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Abstract

We review our recent work on dealloyed nanoparticle electrocatalysts and address their synthesis, structural characterization and surface catalytic performance in low-temperature Polymer Electrolyte Membrane fuel cells (PEMFCs). The active form of the catalyst is obtained by voltammetric dealloying of non-noble metal rich Pt alloy precursors. In the dealloying process, the less noble precursor component, here Cu, is selectively removed from the surface of the precursor alloy particles and hence a Pt enriched particle shell is formed. Single fuel cell tests showed that, when used on the cathode of PEMFCs, dealloyed Pt catalysts show reactivities for the oxygen reduction reaction (ORR) which are up to 6 times higher than those of conventional pure Pt fuel cell catalysts. Similarly, the stability of dealloyed nanoparticle catalysts is superior to that of pure Pt particles. X-ray based structural and compositional studies suggested a core—shell particle structure as the active form of the catalyst consisting of a Pt enriched particle shell surrounding a Pt alloy core. At the present time, this catalyst system constitutes one of the most active fuel cell catalyst system reported in the literature. I. THE CONCEPT OF DEALLOYED NANOPARTICLE CATALYSTS Despite much recent focus on the development of advanced Li ion batteries for use as power source for short-range inner city transportation 255 Bereitgestellt von | Technische Universitat Berlin Angemeldet Heruntergeladen am | 14.04.15 16:12 Vol. 25. No. 4. 2009 Dealloyed Core-Shell Fuel Cell Eleclrocatalysts applications, low temperature fuel cells continue to be the solution of choice for medium and long range transportation technologies based on their gravimetric power density as well as the gravimetric energy density of commonly used fuels. Wider use of low-temperature fuel cell technology is hampered by performance, cost, and durability issues associated with materials and components of a single fuel cell. Figure 1 displays a cross section of the layered structure of a low temperature PEMFC showing the anode (left) and cathode (right) gas diffusion layers (GDLs), which sandwich the anode and cathode catalyst layers and the proton exchange membrane. Figure 1 also schematically shows the molecular as well as electrical pathways of hydrogen fuel molecules, oxygen molecules, protons as well as of electrons. The overall performance of a PEMFC in terms of its practical cell voltage is limited by kinetic, ohmic, and mass transport processes for low, medium and high current densities, respectively. Of these, the kinetic surface catalytic reactions cause the most severe fuel cell voltage losses. * Anode fl( / Cathode ·>' '..·· Electrical | O2+*H* + 4e -> 2 H2O Energy Fig. 1: Cross sectional SEM micrograph through a membrane electrode assembly sandwiched between gas diffusion layers. Reaction processes at anode and cathode, mass and charge flows are indicated (from ref) In particular, the electrocatalytic Oxygen Reduction Reaction (ORR) at the cathode according to O2 + 4H + +4e->2H 2 O E°=+1.23 V/RHE (1) represents the key challenge to improved PEMFCs. In acidic media, Pt catalysts offer the highest catalytic activities which made first unsupported, later high surface area carbon-supported Pt particles the ORR catalyst of 256 Bereitgestellt von | Technische Universitat Berlin Angemeldet Heruntergeladen am | 14.04.15 16:12 Peter Strasser Reviews in Chemical Engineering choice· . Figure 2 illustrates the associative (via O2H) as well as the dissociative (via O) pathways of reaction (1) from molecular oxygen to water. Key for the catalysis is the chemisorption energy of the adsorbed oxygenated intermediates, such as Pt-O2H, Pt-O, and Pt-OH. On pure Pt, atomic oxygen is bonded too strongly and requires considerable overpotentials to react to Pt-OH. As a result of this, Pt is covered by (hydr)oxide adsorbates near the equilibrium potential of reaction (1). There is a consensus within the fuel cell catalysis community that a moderate reduction of the Pt-O chemisorption energy would result in significant ORR activity increases. H2O2 Hydrogen peroxide 0=0 Oxygen adsorption Oxygenated OH intemediates

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1515/revce.2009.25.4.255

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Cited by

See all 102

Metadata

Authors
Strasser, P.
Venue
Reviews in Chemical Engineering
Published
2009-01
Volume
25
Issue
4
ISSN
  • 0167-8299 (ISSN-L)
  • 2191-0235
OpenAlex
W2087935983
Cited by
102
References
10
FWCI
4.36
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Dealloyed Core-Shell Fuel Cell Electrocatalysts. https://app.cochat.ai/papers/10.1515/revce.2009.25.4.255
The paper
Strasser, P. (2009). Dealloyed Core-Shell Fuel Cell Electrocatalysts. Reviews in Chemical Engineering. https://doi.org/10.1515/revce.2009.25.4.255

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.