Fast pyrolysis of lignins
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Three lignins: Indulin AT, LignoboostTM, and Acetocell lignin, were characterized and pyrolyzed in a continuous-fed fast pyrolysis process. The physical and chemical properties of the lignins included chemical composition, heat content, ash, and water content. The distributed activation energy model (DAEM) was used to describe the pyrolysis of each lignin. Activation energy distributions of each lignin were quite different and generally covered a broad range of energies, typically found in lignins. Process yields for initial continuous-fed fast pyrolysis experiments are reported. Bio-oil yield was low, ranging from 16 to 22%. Under the fast pyrolysis conditions used, the Indulin AT and LignoboostTM lignin yielded slightly more liquid product than the Acetocell lignin. Lignin kinetic parameters and chemical composition vary considerably and fast pyrolysis processes must be specified for each type of lignin.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery of phenolic compounds through the decomposition of lignin in near and supercritical water
Wahyudiono, Sasaki, M., & Goto, M. (2008) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2007.09.001 · Cited by 323
Pyrolysis of Lignins: Experimental and Kinetics Studies
Ferdous, D., Dalai, A. K., Bej, S. K., & Thring, R. W. (2002) · Energy & Fuels · doi:10.1021/ef0200323 · Cited by 310 · cited 3×
“…LignoboostTM lignins were essentially identical (193 kJ/mol) and were within the range determined for lignins reported in the literature (Caballero et al. 1996a; Caballero et al. 1996b; Cordero et al. 1990; Ferdous et al. 2002; Liu et al. 2008; Nunn et al. 1985; Stamm 1956; Suuberg et al. 1978).”
MethodResultProduct compositions and kinetics in the rapid pyrolysis of milled wood lignin
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a054 · Cited by 175
Study of the primary pyrolysis of Kraft lignin at high heating rates: yields and kinetics
Caballero, J. A., Font, R., & Marcilla, A. (1996) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(96)00929-1 · Cited by 98
Cited by
Liquid fuels, hydrogen and chemicals from lignin: A critical review
Azadi, P., Inderwildi, O. R., Farnood, R., & King, D. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.022 · Cited by 1,066
Lignin: Recent advances and emerging applications
Norgren, M., & Edlund, H. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.08.004 · Cited by 518
Cai, J., Wu, W., & Liu, R. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.052 · Cited by 347
“Therefore, the DAEM has been used previously to describe the pyrolysis of biomass components [23,55–60].”
MethodLu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
“However, the remaining sulfur content in Kraft lignin is disadvantageous for its application on pyrolysis due to the acidity of generated oils and air pollution during pyrolysis due to the release of foul-smelling sulfur compounds [152, 183].”
BackgroundLignin Pyrolysis Components and Upgrading—Technology Review
Mu, W., Ben, H., Ragauskas, A., & Deng, Y. (2013) · BioEnergy Research · doi:10.1007/s12155-013-9314-7 · Cited by 333
Metadata
- Authors
- Beis, S. H., Mukkamala, S., Hill, N., Joseph, J., Baker, C., Jensen, B., Stemmler, E. A., Wheeler, C., Frederick, B. G., van Heiningen, A., Berg, A. G., & DeSisto, W. J.
- Venue
- BioResources
- Publisher
- BioResources
- Published
- 2010-05-14
- Volume
- 5
- Issue
- 3
- Pages
- 1408-1424
- ISSN
- 1930-2126 (ISSN-L)
- OpenAlex
- W1549055057
- Cited by
- 125
- References
- 4
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fast pyrolysis of lignins. https://app.cochat.ai/papers/10.15376/biores.5.3.1408-1424
- The paper
- Beis, S. H., Mukkamala, S., Hill, N., Joseph, J., Baker, C., Jensen, B., Stemmler, E. A., Wheeler, C., Frederick, B. G., van Heiningen, A., Berg, A. G., & DeSisto, W. J. (2010). Fast pyrolysis of lignins. BioResources. https://doi.org/10.15376/biores.5.3.1408-1424
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.