Characterization of High Density Polyethylene (HDPE) Reinforced with Banana Peel Fibers
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Lignocellulosic fibers from banana peels were washed with water in order to increase their compatibility with a polymeric matrix, and their properties were compared with unwashed fibers. Washed banana fibers were mixed with high density polyethylene (HDPE) and placed in an injector chamber to produce specimens for tensile tests. Samples of washed banana fibers/HDPE composites were characterized by tensile tests and thermal analysis. The chemical composition of unwashed and washed banana fibers was analyzed by thermogravimetric analysis, scanning electron microscopy, and X-ray diffraction. The treatment with water was effective at removing extractives and increasing the surface roughness, thereby increasing the thermal stability of the fibers. However, results showed that the addition of washed banana fibers decreased the thermal stability of composites, while increasing the melting and crystallization temperatures of composites. The addition of 5 wt% fibers also provided an improvement in mechanical properties of composites in comparison with pure HDPE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“the peel contains significant levels of cellulose and hemicellulose”
From Exploration of the Potential Application of Banana Peel for Its Effective Valorization: A Review (2023) · cites this paper as [96]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613 · cited 1×
“This method was developed by Segal et al. (1959), and it has been widely used for the study of natural fibers.”
MethodSilane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244 · cited 2×
“…and therefore low cost, biodegradability, flammability, flexibility during processing, low density, relatively high tensile and flexural modulus, and non-toxicity (Xie et al. 2010; Qin et al. 2011; Antich et al. 2006; Kim and Netravali 2010; Pereira et al. 2010, 2011; Maschio et al. 2012).”
BackgroundRosa, M. F., Chiou, B.-S., Medeiros, E. S., Wood, D. F., Williams, T. G., Mattoso, L. H. C., Orts, W. J., & Imam, S. H. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.03.085 · Cited by 319 · cited 1×
“In order to optimize this fiber/matrix interface and to promote adhesion, various chemical treatments can be applied on the surface of the fibers, such as alkaline treatment, bleaching, acetylation, and steaming (Venkateshwaran et al. 2013; Rosa et al. 2009; Bessadok et al. 2009).”
Happi Emaga, T., Robert, C., Ronkart, S. N., Wathelet, B., & Paquot, M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.08.030 · Cited by 318 · cited 1×
“Emaga et al. (2008) in the study of banana peels (Musa, genotype AAB) determined there was 6.4% cellulose, 0.6% hemicellulose, and 15.4% lignin.”
BackgroundInfluentialKim, J. T., & Netravali, A. N. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.007 · Cited by 263 · cited 1×
“…as well as in the crystallinity index in relation to the pure HDPE, which is explained by the fact that the fiber provided higher ordering for the internal structure in the composite. also observed by Lei and Wu (2012), with the addition of 40% (w/w) of wood fibers in the polymeric matrix.”
BackgroundQin, L., Qiu, J., Liu, M., Ding, S., Shao, L., Lü, S., Zhang, G., Zhao, Y., & Fu, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.11.039 · Cited by 210 · cited 1×
“The characterization was performed according to the analytical methodology described by Rocha (2000) and validated by Gouveia et al. (2009).”
MethodBanana fibers and microfibrils as lignocellulosic reinforcements in polymer composites
Ibrahim, M. M., Dufresne, A., El-Zawawy, W. K., & Agblevor, F. A. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.057 · Cited by 188 · cited 3×
“Several authors, such as Guimarães et al. (2010), Ibrahim et al. (2010), Oliveira et al.”
BackgroundMethodGuimarães, J. L., Wypych, F., Saul, C. K., Ramos, L. P., & Satyanarayana, K. G. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.002 · Cited by 167 · cited 3×
“Several authors, such as Guimarães et al. (2010), Ibrahim et al. (2010), Oliveira et al.”
BackgroundMethodIsothermal crystallization and mechanical behavior of ionomer treated sisal/HDPE composites
Choudhury, A. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.03.011 · Cited by 99 · cited 1×
“According to Choudhury (2008), the Pereira et al. (2013).”
Surface Modification of Banana Fibers by DBD Plasma Treatment
Oliveira, F. R., Erkens, L., Fangueiro, R. M. E. S., & Souto, A. P. (2012) · Plasma Chemistry and Plasma Processing · doi:10.1007/s11090-012-9354-3 · Cited by 95 · cited 1×
“…and therefore low cost, biodegradability, flammability, flexibility during processing, low density, relatively high tensile and flexural modulus, and non-toxicity (Xie et al. 2010; Qin et al. 2011; Antich et al. 2006; Kim and Netravali 2010; Pereira et al. 2010, 2011; Maschio et al. 2012).”
Background
Research works printed but not linked: 9
- Achak, M., Hadifi, A., Ouazzani, N., Sayadi, S., and Mandi, L. (2009). “Low cost biosorbent “banana peel” for the removal of phenolic compounds from olive mill waste water: Kinetic and equilibrium studies,” Journal of Hazardous Material 166
- Anwar, J., Shafique, U., Zaman, W. U., Salman, M., Dar, A., and Anwar, S. (2010). “Removal of Pb (II) and Cd (II) from water by absorption on peels of banana,” Bioresource Technology 101(6), 1752-1755.
- Awal, A., Cescutti, G., Ghosh, S. B., and Müssig, J. (2011). “Interfacial studies of natural fibre/polypropylene composites using single fibre fragmentation test (SFFT),” Composites Part A 42(1), 50-56.
- Bessadok, A., Roudesli, S., Marais, S., Follain, N., and Lebrun, L. (2009). “Alfa fibres for unsaturated polyester composites reinforcement: Effects of chemical treatments on mechanical and permeation properties,” Composites: Part A 40(2), 184-195.
- Carvalho, K. C. C., Mulinari, D. R., Voorwald, H. J. C., and Cioffi, M. O. H. (2010). “Chemical modification effect on the mechanical properties of HIPS/coconut fiber composites,” BioResources 5(2), 1143-1155.
- Jústiz-Smith, N., Virgo Jr., G., and Buchan, V. E. (2008). “Potential of Jamaican banana, coconut coir and banana fibres as composite materials,” Material Characterization 59(9), 1273-1278.
- Pereira, P. H. F., Cioffi, M. O. H., Voorwld, H. J. C., and Da Silva, M. L. C. P. (2011). “Novel cellulose/NbOPO4.nH2O material from sugarcane bagasse,” BioResources 6(1), 867-878.
- Venkateshwaran, N., Elaya Perumal, A., and Arwin Raj, R. H. (2012). “Mechanical and dynamic mechanical analysis of cwoven banana/epoxy composite,” Journal Polymer Environment 20, 565-572.
- Article submitted: October 28, 2012; Peer review completed: January 4, 2013; Revised version received and accepted: March 2, 2013; Published: March 22, 2013.
Cited by
Vegetal fibers in polymeric composites: a review
Pereira, P. H. F., Rosa, M. D. F., Cioffi, M. O. H., Benini, K. C. C. D. C., Milanese, A. C., Voorwald, H. J. C., & Mulinari, D. R. (2015) · Polímeros · doi:10.1590/0104-1428.1722 · Cited by 264
“Besides mentioned fibers, every day new fibers appear as an alternative to produce natural composites, in literature there are studies with palmers fibers[41], wheat straw[117] and rice straw[190], pineapple crown[41], banana pseudostem[186,191], banana pells[95] and many other fibers can be extracted from different r…”
BackgroundSelf-citationSatapathy, S., & Raju, K. V. S. N. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0938-0 · Cited by 87
Parameswaranpillai, J., Gopi, J. A., Radoor, S., D., M. D. C., Krishnasamy, S., Deshmukh, K., Hameed, N., Salim, N. V., & Sienkiewicz, N. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100333 · Cited by 99
Characterization of Ugandan biomass wastes as the potential candidates towards bioenergy production
Yusuf, A. A., & Inambao, F. L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109477 · Cited by 71
Evaluation of Structural, Tensile and Thermal Properties of Banana Fibers
Subramanya, R., Satyanarayana, K. G., & Pilar, B. S. (2016) · Journal of Natural Fibers · doi:10.1080/15440478.2016.1212771 · Cited by 64
“Finally, the fourth step above 400°C could be due to the break of bonds of the protolignin (lignin present in the fibers) (Guimarães et al. 2009; Paiva et al. 2004; Pereira et al. 2013).”
Influential
Metadata
- Authors
- Pereira, P. H. F., Benini, K. C. C. C., Watashi, C. Y., Voorwald, H. J. C., & Cioffi, M. O. H.
- Affiliations
- Universidade Estadual Paulista (Unesp) (BR)
- Venue
- BioResources
- Publisher
- BioResources
- Published
- 2013-03-22
- Volume
- 8
- Issue
- 2
- ISSN
- 1930-2126 (ISSN-L)
- OpenAlex
- W2037031479
- Semantic Scholar
- e5350c03da80da9acb3ed9ea270595ba38f6833a
- Cited by
- 44
- References
- 13
- Citations by year
- 2026: 7 · 2025: 2 · 2024: 5 · 2023: 6 · 2022: 6 · 2021: 4 · 2020: 1 · 2019: 2 · 2018: 4 · 2017: 3 · 2016: 1 · 2015: 2
- FWCI
- 0.72
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- BioResources (publishedVersion)
- Acervo Digital da Universidade Estadual Paulista (Universidade Estadual Paulista) (submittedVersion, other-oa)
- Americanae (AECID Library) (submittedVersion, other-oa)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, other-oa)
- Funders
- Fundação de Amparo à Pesquisa do Estado de São Paulo
- Fundo para o Desenvolvimento das Ciências e da Tecnologia
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Keywords
- high-density polyethylene, banana peel fiber, lignocellulosic fibers, fiber-reinforced composites, water washing, fiber surface roughness, extractives removal, thermal stability, melting and crystallization temperature, tensile properties, natural fiber composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of High Density Polyethylene (HDPE) Reinforced with Banana Peel Fibers. https://app.cochat.ai/papers/10.15376/biores.8.2.2351-2365
- The paper
- Pereira, P. H. F., Benini, K. C. C. C., Watashi, C. Y., Voorwald, H. J. C., & Cioffi, M. O. H. (2013). Characterization of High Density Polyethylene (HDPE) Reinforced with Banana Peel Fibers. BioResources. https://doi.org/10.15376/biores.8.2.2351-2365
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.