The DOI matches its Crossref record.
Hydrothermal synthesis of multiwall carbon nanotubes
Abstract
Multiwall open-end and closed carbon nanotubes with the wall thickness from several to more than 100 carbon layers were produced by a principally new method— hydrothermal synthesis—using polyethylene/water mixtures in the presence of nickel at 700–800 °C under 60–100 MPa pressure. An important feature of hydrothermal nanotubes is a small wall thickness, which is about 10% of the large inner diameter of 20–800 nm. Closed nanotubes were leak-tight by virtue of holding encapsulated water at high vacuum and can be used as test tubes for in situ experiments in transmission electron microscope (TEM). Raman microspectroscopy analysis of single nanotubes shows a well-ordered graphitic structure, in agreement with high-resolution TEM. The hydrothermal synthesis has the potential for producing multiwall nanotubes for a variety of applications. The fabrication of nanotubes under hydrothermal conditions may explain their presence in coals and carbonaceous rocks and suggests that they should be present in natural graphite deposits formed under hydrothermal conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Hydrothermal processing of materials: past, present and future
Yoshimura, M., & Byrappa, K. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-1853-x · Cited by 662
Self-citationCarbon based materials: a review of adsorbents for inorganic and organic compounds
Sabzehmeidani, M. M., Mahnaee, S., Ghaedi, M., Heidari, H., & Roy, V. A. L. (2021) · Materials Advances · doi:10.1039/d0ma00087f · Cited by 646
Nanomaterials and supercritical fluids
Reverchon, E., & Adami, R. (2006) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2005.08.003 · Cited by 589
Nanoparticles synthesis using supercritical fluid technology – towards biomedical applications
Byrappa, K., Ohara, S., & Adschiri, T. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.09.001 · Cited by 487
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Synthesis Methods of Carbon Nanotubes and Related Materials
Szabó, A., Perri, C., Csató, A., Giordano, G., Vuono, D., & Nagy, J. B. (2010) · Materials · doi:10.3390/ma3053092 · Cited by 339
Biomass‐Derived Porous Carbon Materials: Synthesis and Catalytic Applications
De, S., Balu, A. M., van der Waal, J. C., & Luque, R. (2015) · ChemCatChem · doi:10.1002/cctc.201500081 · Cited by 298
Qian, H.-S., Yu, S.-H., Luo, L.-B., Gong, J.-Y., Fei, L.-F., & Liu, X.-M. (2006) · Chemistry of Materials · doi:10.1021/cm052848y · Cited by 263
Observation of Water Confined in Nanometer Channels of Closed Carbon Nanotubes
Naguib, N., Ye, H., Gogotsi, Y., Yazicioglu, A. G., Megaridis, C. M., & Yoshimura, M. (2004) · Nano Letters · doi:10.1021/nl0484907 · Cited by 261
Self-citationCui, X., Antonietti, M., & Yu, S. (2006) · Small · doi:10.1002/smll.200600047 · Cited by 255
In situ multiphase fluid experiments in hydrothermal carbon nanotubes
Gogotsi, Y., Libera, J. A., Güvenç-Yazicioglu, A., & Megaridis, C. M. (2001) · Applied Physics Letters · doi:10.1063/1.1391228 · Cited by 254
Self-citation
Metadata
- Authors
- Gogotsi, Y., Libera, J. A., & Yoshimura, M.
- Venue
- Journal of Materials Research
- Published
- 2000-12
- Volume
- 15
- Issue
- 12
- Pages
- 2591-2594
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2118683814
- Cited by
- 188
- References
- 0
- FWCI
- 5.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.