The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation
Abstract
It is well known that plastic deformation induced by conventional forming methodssuch as rolling, drawing or extrusion can significantly increase the strength of metalsHowever, this increase is usually accompanied by a loss of ductility. For example, Fig.1 shows that with increasing plastic deformation, the yield strength of Cu and Almonotonically increases while their elongation to failure (ductility) decreases. Thesame trend is also true for other metals and alloys. Here we report an extraordinarycombination of high strength and high ductility produced in metals subject to severeplastic deformation (SPD). We believe that this unusual mechanical behavior is causedby the unique nanostructures generated by SPD processing. The combination ofultrafine grain size and high-density dislocations appears to enable deformation by newmechanisms. This work demonstrates the possibility of tailoring the microstructures ofmetals and alloys by SPD to obtain both high strength and high ductility. Materialswith such desirable mechanical properties are very attractive for advanced structuralapplications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bulk nanostructured materials from severe plastic deformation
Valiev, R. Z., Islamgaliev, R. K., & Alexandrov, I. V. (2000) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00007-9 · Cited by 6,478
Self-citationSmithells Metals Reference Book
(1992) · Elsevier eBooks · doi:10.1016/c2009-0-25363-3 · Cited by 3,613
Hart, E. W. (1967) · Acta Metallurgica · doi:10.1016/0001-6160(67)90211-8 · Cited by 1,003
Smithells metals reference book
(1993) · Choice Reviews Online · doi:10.5860/choice.30-3852 · Cited by 833
An investigation of microstructural evolution during equal-channel angular pressing
Iwahashi, Y., Horita, Z., Nemoto, M., & Langdon, T. G. (1997) · Acta Materialia · doi:10.1016/s1359-6454(97)00100-6 · Cited by 806
Superplastic Extensibility of Nanocrystalline Copper at Room Temperature
Lu, L., Sui, M. L., & Lu, K. (2000) · Science · doi:10.1126/science.287.5457.1463 · Cited by 781
Superplasticity in metals and ceramics
Nieh, T. G. (1997) · Materials Characterization · doi:10.1016/s1044-5803(98)80003-x · Cited by 596
Deformation behaviour of ultra-fine-grained copper
Valiev, R. Z., Козлов, Э. В., Ivanov, Y. F., Lian, J., Nazarov, A. A., & BAUDELET, B. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90326-3 · Cited by 554
Self-citationSuperplasticity in Metals and Ceramics
Nieh, T. G., Wadsworth, J., & SHERBY, O. D. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9780511525230 · Cited by 523
Influence of ECAP routes on the microstructure and properties of pure Ti
Stolyarov, V. V., Zhu, Y., Alexandrov, I. V., Lowe, T. C., & Valiev, R. Z. (2001) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)01411-8 · Cited by 465
Self-citation
Cited by
Mechanical properties of nanocrystalline materials
Meyers, M. A., Mishra, A., & Benson, D. J. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.08.003 · Cited by 4,597
Principles of equal-channel angular pressing as a processing tool for grain refinement
Valiev, R. Z., & Langdon, T. G. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.02.003 · Cited by 4,135
Self-citationHigh tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Sakai, T., Belyakov, A., Kaibyshev, R., Miura, H., & Jonas, J. J. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.09.002 · Cited by 2,772
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Wu, X., Yang, M., Yuan, F., Wu, G., Wei, Y., Huang, X., & Zhu, Y. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1517193112 · Cited by 2,017
Self-citationZhu, Y., & Wu, X. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101019 · Cited by 1,537
Self-citationDeformation twinning in nanocrystalline materials
Zhu, Y. T., Liao, X. Z., & Wu, X. L. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.05.001 · Cited by 1,373
Self-citationXu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Zhao, Y. H., Liao, X. Z., Jin, Z., Valiev, R. Z., & Zhu, Y. T. (2004) · Acta Materialia · doi:10.1016/j.actamat.2004.06.017 · Cited by 994
Self-citationAsaro, R. J., & Suresh, S. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.03.047 · Cited by 802
Nanomechanics of Hall–Petch relationship in nanocrystalline materials
Pande, C. S., & Cooper, K. P. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2009.03.008 · Cited by 767
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Structural evolutions of metallic materials processed by severe plastic deformation
Cao, Y., Ni, S., Liao, X., Song, M., & Zhu, Y. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.001 · Cited by 633
Self-citationSynergetic Strengthening by Gradient Structure
Wu, X. L., Jiang, P., Chen, L., Zhang, J. F., Yuan, F. P., & Zhu, Y. T. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.935821 · Cited by 614
Self-citationThe effect of solid solution W additions on the mechanical properties of nanocrystalline Ni
Schuh, C. A., Nieh, T. G., & Iwasaki, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00427-5 · Cited by 603
Nanomaterials by severe plastic deformation: review of historical developments and recent advances
Edalati, K., Bachmaier, A., Beloshenko, V. A., Beygelzimer, Y., Blank, V. D., Botta, W. J., Bryła, K., Čížek, J., Divinski, S., Enikeev, N. A., et al. (2022) · Materials Research Letters · doi:10.1080/21663831.2022.2029779 · Cited by 592
Self-citationAtomistic modeling of interfaces and their impact on microstructure and properties
Mishin, Y., Asta, M., & Li, J. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.10.049 · Cited by 519
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Trimby, P. W. (2012) · Ultramicroscopy · doi:10.1016/j.ultramic.2012.06.004 · Cited by 403
Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling
Stolyarov, V. V., Zhu, Y. T., Alexandrov, I. V., Lowe, T. C., & Valiev, R. Z. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(02)00366-0 · Cited by 381
Self-citationSchuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P., & Hohenwarter, A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.035 · Cited by 315
Current status and perspectives of zinc-based absorbable alloys for biomedical applications
Hernández-Escobar, D., Champagne, S., Yilmazer, H., Dikici, B., Boehlert, C. J., & Hermawan, H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.034 · Cited by 309
Development of advanced high heat flux and plasma-facing materials
Linsmeier, C., Rieth, M., Aktaa, J., Chikada, T., Hoffmann, A., Hoffmann, J., Houben, A., Kurishita, H., Jin, X., Li, M., et al. (2017) · Nuclear Fusion · doi:10.1088/1741-4326/aa6f71 · Cited by 300
Qin, S., Yang, M., Jiang, P., Wang, J., Wu, X., Zhou, H., & Yuan, F. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.117847 · Cited by 290
The hidden structure of human enamel
Beniash, E., Stifler, C. A., Sun, C.-Y., Jung, G. S., Qin, Z., Buehler, M. J., & Gilbert, P. U. P. A. (2019) · Nature Communications · doi:10.1038/s41467-019-12185-7 · Cited by 265
Bohluli, H., Khalili, K., & Seyedkashi, S. M. H. (2021) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2021.02.010 · Cited by 15
Metadata
- Authors
- Valiev, R. Z., Alexandrov, I. V., Zhu, Y. T., & Lowe, T. C.
- Venue
- Journal of Materials Research
- Published
- 2002-01
- Volume
- 17
- Issue
- 1
- Pages
- 5-8
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2168157615
- Cited by
- 1,162
- References
- 14
- FWCI
- 27.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.