The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Mechanical properties of nacre constituents and their impact on mechanical performance
Abstract
The mechanical properties of nacre constituents from red abalone were investigated. Electron microscopy studies revealed that the tablets are composed of single-crystal aragonite with nanograin inclusions. Both nanoasperities and aragonite bridges are present within the interfaces between the tablets. By means of nanoindentation and axial compression tests, we identified single tablet elastic and inelastic properties. The elastic properties are very similar to those of single-crystal aragonite. However, their strength is higher than previously reported values for aragonite. A finite element model of the interface accounting for nanoasperities and the identified properties revealed that the nanoasperities are strong enough to withstand climbing and resist tablet sliding, at least over the initial stages of deformation. Furthermore, it was observed that the model over-predicts strength and under-predicts ductility. Therefore, we conclude that other interface features must be responsible for the enhanced performance of nacre over its constituents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Lawn, B. (1993) · Cambridge University Press eBooks · doi:10.1017/cbo9780511623127 · Cited by 4,759
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Effects of the substrate on the determination of thin film mechanical properties by nanoindentation
Saha, R., & Nix, W. D. (2002) · Acta Materialia · doi:10.1016/s1359-6454(01)00328-7 · Cited by 1,564
The mechanical design of nacre
Jackson, A. P., Vincent, J. F. V., & Turner, R. M. (1988) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1988.0056 · Cited by 1,269
Molecular mechanistic origin of the toughness of natural adhesives, fibres and composites
Smith, B. L., Schäffer, T. E., Viani, M., Thompson, J. B., Frederick, N. A., Kindt, J., Belcher, A., Stucky, G. D., Morse, D. E., & Hansma, P. K. (1999) · Nature · doi:10.1038/21607 · Cited by 1,218
Control of crystal phase switching and orientation by soluble mollusc-shell proteins
Belcher, A. M., Wu, X. H., Christensen, R. J., Hansma, P. K., Stucky, G. D., & Morse, D. E. (1996) · Nature · doi:10.1038/381056a0 · Cited by 1,153
Deformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835
Mechanical properties of mother of pearl in tension
Currey, J. D. (1977) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1977.0050 · Cited by 722
Rigid Biological Systems as Models for Synthetic Composites
Mayer, G. (2005) · Science · doi:10.1126/science.1116994 · Cited by 645
Li, X., Chang, W.-C., Chao, Y. J., Wang, R., & Chang, M. (2004) · Nano Letters · doi:10.1021/nl049962k · Cited by 591
Structural and mechanical properties of the organic matrix layers of nacre
Song, F., Soh, A. K., & Bai, Y. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00215-1 · Cited by 421
Does Abalone Nacre Form by Heteroepitaxial Nucleation or by Growth through Mineral Bridges?
Schäffer, T. E., Ionescu-Zanetti, C., Proksch, R., Fritz, M., Walters, D. A., Almqvist, N., Zaremba, C. M., Belcher, A. M., Smith, B. L., Stucky, G. D., et al. (1997) · Chemistry of Materials · doi:10.1021/cm960429i · Cited by 401
Quasi-static and dynamic mechanical response of Haliotis rufescens (abalone) shells
Menig, R., Meyers, M. H., Meyers, M. A., & Vecchio, K. S. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00443-7 · Cited by 388
Model for the robust mechanical behavior of nacre
Evans, A. G., Suo, Z., Wang, R. Z., Aksay, I. A., He, M. Y., & Hutchinson, J. W. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0339 · Cited by 371
Bruet, B. J. F., Qi, H. J., Boyce, M. C., Panas, R., Tai, K., Frick, L., & Ortiz, C. (2005) · Journal of Materials Research · doi:10.1557/jmr.2005.0273 · Cited by 202
Biomimetics. Design and Processing of Materials.
Sarıkaya, M., & Aksay, İ. A. (1995) · AIP Press eBooks · Cited by 199
Okumura, K., & de Gennes, P.-G. (2001) · The European Physical Journal E · doi:10.1007/s101890170150 · Cited by 196
Crystal orientation, toughening mechanisms and a mimic of nacre
Feng, Q. L., Cui, F. Z., Pu, G., Wang, R. Z., & Li, H. D. (2000) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(00)00138-7 · Cited by 158
Observations of damage morphologies in nacre during deformation and fracture
Wang, R. Z., Wen, H. B., Cui, F. Z., Zhang, H. B., & Li, H. D. (1995) · Journal of Materials Science · doi:10.1007/bf01184577 · Cited by 147
Synchrotron x-ray microbeam diffraction from abalone shell
DiMasi, E., & Sarıkaya, M. (2004) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2004.0196 · Cited by 56
Knoop Microhardness Anisotropy of Single‐Crystal Aragonite
Han, Y. H., Li, H., Wong, T. Y., & Bradt, R. C. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb04311.x · Cited by 28
Cited by
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Gower, L. B. (2008) · Chemical Reviews · doi:10.1021/cr800443h · Cited by 1,086
On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure
BARTHELAT, F., TANG, H., ZAVATTIERI, P., LI, C., & ESPINOSA, H. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.07.007 · Cited by 1,032
Self-citationMerger of structure and material in nacre and bone – Perspectives on de novo biomimetic materials
Espinosa, H. D., Rim, J. E., Barthelat, F., & Buehler, M. J. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2009.05.001 · Cited by 817
Self-citationBiological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
Metadata
- Authors
- Barthelat, F., Li, C.-M., Comi, C., & Espinosa, H. D.
- Venue
- Journal of Materials Research
- Published
- 2006-08-01
- Volume
- 21
- Issue
- 8
- Pages
- 1977-1986
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2115235651
- Cited by
- 384
- References
- 22
- FWCI
- 5.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.