The DOI matches its Crossref record; 95 of the 95 references it cites were found in a registry or an index.
Development and exploration of refractory high entropy alloys—A review
Abstract
Open literature publications, in the period from 2010 to the end of January 2018, on refractory high entropy alloys (RHEAs) and refractory complex concentrated alloys (RCCAs) are reviewed. While RHEAs, by original definition, are alloys consisting of five or more principal elements with the concentration of each of these elements between 5 and 35 at.%, RCCAs can contain three or more principal elements and the element concentration can be greater than 35%. The 151 reported RHEAs/RCCAs are analyzed based on their composition, processing methods, microstructures, and phases. Mechanical properties, strengthening and deformation mechanisms, oxidation, and corrosion behavior, as well as tribology, of RHEA/RCCAs are summarized. Unique properties of some of these alloys make them promising candidates for high temperature applications beyond Ni-based superalloys and/or conventional refractory alloys. Methods of development and exploration, future directions of research and development, and potential applications of RHEAs are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2016) · Alloy Phase Diagrams · doi:10.31399/asm.hb.v03.a0006247 · Cited by 16,046
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Self-citationXCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals
Pugh, S. F. (1954) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440808520496 · Cited by 8,657
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical Alloying And Milling
Suryanarayana, C. (2004) · CRC Press eBooks · doi:10.1201/9780203020647 · Cited by 3,882
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Self-citationRefractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Self-citationA quantitative demonstration of the grain boundary diffusion mechanism for the oxidation of metals
Atkinson, A., Taylor, R. I., & Hughes, A. E. (1982) · Philosophical Magazine A · doi:10.1080/01418618208239905 · Cited by 2,540
Theoretical predictions of structure and related properties of intermetallics
Pettifor, D. G. (1992) · Materials Science and Technology · doi:10.1179/026708392790170801 · Cited by 2,110
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Self-citationHigh strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819
(2006) · Electrochemistry and Corrosion Science · doi:10.1007/1-4020-7860-9_10 · Cited by 1,814
BIRKS, N., MEIER, G. H., & PETTIT, F. S. (1989) · Superalloys Supercomposites Superceramics · doi:10.1016/b978-0-12-690845-9.50020-8 · Cited by 1,513
Handbook of Ternary Alloy Phase Diagrams
Villars, P., Prince, A., & 岡本, 博. (1995) · Medical Entomology and Zoology · Cited by 1,359
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Self-citationHigh Temperature Oxidation and Corrosion of Metals
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-00259-6 · Cited by 957
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Self-citation(1998) · ASM International eBooks · doi:10.31399/asm.hb.mhde2.9781627081993 · Cited by 890
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Self-citationEffect of aluminum on the microstructure and properties of two refractory high-entropy alloys
Senkov, O. N., Senkova, S. V., & Woodward, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.029 · Cited by 857
Self-citationPhase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Oxidation of Ni-Cr-Al Alloys Between 1000° and 1200°C
Giggins, C. S., & Pettit, F. S. (1971) · Journal of The Electrochemical Society · doi:10.1149/1.2407837 · Cited by 695
Senkov, O. N., Senkova, S. V., Woodward, C., & Miracle, D. B. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.032 · Cited by 674
Self-citationEnhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
Wu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 528
Han, Z. D., Chen, N., Zhao, S. F., Fan, L. W., Yang, G. N., Shao, Y., & Yao, K. F. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.01.007 · Cited by 528
Herrera, C., Ponge, D., & Raabe, D. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.04.011 · Cited by 520
Alloy design for intrinsically ductile refractory high-entropy alloys
Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 509
Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., & Woodward, C. F. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.09.033 · Cited by 497
Self-citationStructure and mechanical properties of a light-weight AlNbTiV high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.162 · Cited by 494
Microstructure and properties of a refractory high-entropy alloy after cold working
Senkov, O. N., & Semiatin, S. L. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.209 · Cited by 461
Self-citationMapping the world of complex concentrated alloys
Gorsse, S., Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.027 · Cited by 432
Self-citationMicrostructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
Wang, S.-P., & Xu, J. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.12.057 · Cited by 402
Microstructures and mechanical properties of Ti NbMoTaW refractory high-entropy alloys
Han, Z. D., Luan, H. W., Liu, X., Chen, N., Li, X. Y., Shao, Y., & Yao, K. F. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.12.004 · Cited by 401
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
Microstructure and oxidation behavior of new refractory high entropy alloys
Liu, C. M., Wang, H. M., Zhang, S. Q., Tang, H. B., & Zhang, A. L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.102 · Cited by 390
Gorr, B., Azim, M., Christ, H.-J., Mueller, T., Schliephake, D., & Heilmaier, M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.012 · Cited by 386
Local lattice distortion in high-entropy alloys
Song, H., Tian, F., Hu, Q.-M., Vitos, L., Wang, Y., Shen, J., & Chen, N. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.023404 · Cited by 378
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H. F., & Zhang, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.07.102 · Cited by 361
Maiti, S., & Steurer, W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.018 · Cited by 331
Effect of Al addition on mechanical properties and microstructure of refractory AlxHfNbTaTiZr alloys
Lin, C.-M., Juan, C.-C., Chang, C.-H., Tsai, C.-W., & Yeh, J.-W. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.064 · Cited by 317
Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P., & Hohenwarter, A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.035 · Cited by 315
Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., Senkova, S. V., Dimiduk, D. M., Woodward, C., & Miracle, D. B. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6582-0 · Cited by 299
Self-citationYe, Y. X., Liu, C. Z., Wang, H., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.014 · Cited by 295
Kang, B., Lee, J., Ryu, H. J., & Hong, S. H. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.12.021 · Cited by 292
On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy
Couzinié, J.-P., Lilensten, L., Champion, Y., Dirras, G., Perrière, L., & Guillot, I. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.08.024 · Cited by 284
Microstructure and Compressive Properties of NbTiVTaAlx High Entropy Alloys
Yang, X., Zhang, Y., & Liaw, P. K. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.03.043 · Cited by 283
Accelerated exploration of multi-principal element alloys for structural applications
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Calphad · doi:10.1016/j.calphad.2015.04.009 · Cited by 275
Self-citationJuan, C.-C., Tsai, M., Tsai, C., Hsu, W., Lin, C.-M., Chen, S.-K., Lin, S.-J., & Yeh, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.060 · Cited by 275
Lilensten, L., Couzinié, J.-P., Bourgon, J., Perrière, L., Dirras, G., Prima, F., & Guillot, I. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1221861 · Cited by 268
Tuning Ideal Tensile Strengths and Intrinsic Ductility of bcc Refractory Alloys
Qi, L., & Chrzan, D. C. (2014) · Physical Review Letters · doi:10.1103/physrevlett.112.115503 · Cited by 267
Elastic and plastic properties of as-cast equimolar TiHfZrTaNb high-entropy alloy
Dirras, G., Lilensten, L., Djemia, P., Laurent-Brocq, M., Tingaud, D., Couzinié, J.-P., Perrière, L., Chauveau, T., & Guillot, I. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.12.017 · Cited by 245
Chen, H., Kauffmann, A., Gorr, B., Schliephake, D., Seemüller, C., Wagner, J. N., Christ, H.-J., & Heilmaier, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.050 · Cited by 241
Gorr, B., Mueller, F., Christ, H., Mueller, T., Chen, H., Kauffmann, A., & Heilmaier, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.07.219 · Cited by 236
Rao, S. I., Varvenne, C., Woodward, C., Parthasarathy, T. A., Miracle, D., Senkov, O. N., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.011 · Cited by 236
Self-citationBraic, V., Balaceanu, M., Braic, M., Vladescu, A., Panseri, S., & Russo, A. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.02.020 · Cited by 224
Hybrid Monte Carlo/Molecular Dynamics Simulation of a Refractory Metal High Entropy Alloy
Widom, M., Huhn, W. P., Maiti, S., & Steurer, W. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-2000-8 · Cited by 203
Design of Refractory High-Entropy Alloys
Gao, M. C., Carney, C. S., Doğan, Ö. N., Jablonksi, P. D., Hawk, J. A., & Alman, D. E. (2015) · JOM · doi:10.1007/s11837-015-1617-z · Cited by 201
Microstructures and Crackling Noise of AlxNbTiMoV High Entropy Alloys
Chen, S., Yang, X., Dahmen, K., Liaw, P., & Zhang, Y. (2014) · Entropy · doi:10.3390/e16020870 · Cited by 194
Microstructure of a near-equimolar refractory high-entropy alloy
Couzinié, J. P., Dirras, G., Perrière, L., Chauveau, T., Leroy, E., Champion, Y., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.04.062 · Cited by 193
Critical Assessment 14: High entropy alloys and their development as structural materials
Miracle, D. B. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000749 · Cited by 182
Self-citationAging behavior of the HfNbTaTiZr high entropy alloy
Stepanov, N. D., Yurchenko, N. Y., Zherebtsov, S. V., Tikhonovsky, M. A., & Salishchev, G. A. (2018) · Materials Letters · doi:10.1016/j.matlet.2017.09.094 · Cited by 180
Dirras, G., Couque, H., Lilensten, L., Heczel, A., Tingaud, D., Couzinié, J.-P., Perrière, L., Gubicza, J., & Guillot, I. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.11.018 · Cited by 171
Feng, X. B., Zhang, J. Y., Wang, Y. Q., Hou, Z. Q., Wu, K., Liu, G., & Sun, J. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.04.013 · Cited by 166
Stepanov, N., Yurchenko, N., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, М. А. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000032 · Cited by 159
Yao, H., Qiao, J.-W., Gao, M. C., Hawk, J. A., Ma, S., & Zhou, H. (2016) · Entropy · doi:10.3390/e18050189 · Cited by 159
Chang, C., Titus, M. S., & Yeh, J. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700948 · Cited by 158
Ab initio design of elastically isotropic TiZrNbMoV high-entropy alloys
Tian, F., Varga, L. K., Chen, N., Shen, J., & Vitos, L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.01.237 · Cited by 143
Waseem, O. A., Lee, J.-H., Lee, H. M., & Ryu, H. J. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.054 · Cited by 141
New structure in refractory high-entropy alloys
Lilensten, L., Couzinié, J., Perrière, L., Bourgon, J., Emery, N., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.06.064 · Cited by 136
Dirras, G. F., Gubicza, J., Heczel, A., Lilensten, L., Couzinié, J., Perrière, L., Guillot, I., & Hocini, A. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.08.007 · Cited by 133
Guo, N. N., Wang, L., Luo, L., Li, X. Z., Chen, R. R., Su, Y., Guo, J., & Fu, H. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.091 · Cited by 127
Miracle, D. B., Majumdar, B. S., Wertz, K. N., & Gorsse, S. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.08.001 · Cited by 126
Self-citationPrediction of A2 to B2 Phase Transition in the High-Entropy Alloy Mo-Nb-Ta-W
Huhn, W., & Widom, M. (2013) · JOM · doi:10.1007/s11837-013-0772-3 · Cited by 123
Senary refractory high-entropy alloy Cr MoNbTaVW
Zhang, B., Gao, M. C., Zhang, Y., & Guo, S. (2015) · Calphad · doi:10.1016/j.calphad.2015.09.007 · Cited by 118
Senary Refractory High-Entropy Alloy HfNbTaTiVZr
Gao, M. C., Zhang, B., Yang, S., & Guo, S. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3105-z · Cited by 117
Hybrid Monte Carlo/Molecular Dynamics Simulation of a Refractory Metal High Entropy Alloy
Widom, M., Huhn, W., Maiti, S., & Steurer, W. (2018) · doi:10.1184/r1/6506957.v1 · Cited by 112
Senary refractory high entropy alloy MoNbTaTiVW
Zhang, B., Gao, M. C., Zhang, Y., Yang, S., & Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000031 · Cited by 102
Müller, F., Gorr, B., Christ, H., Chen, H., Kauffmann, A., & Heilmaier, M. (2017) · Materials at High Temperatures · doi:10.1080/09603409.2017.1389115 · Cited by 99
Dry‐Sliding Wear Response of MoTaWNbV High Entropy Alloy
Poulia, A., Georgatis, E., Lekatou, A. G., & Karantzalis, A. E. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600535 · Cited by 87
Computation of entropies and phase equilibria in refractory V-Nb-Mo-Ta-W high-entropy alloys
Wang, Y., Yan, M., Zhu, Q., Wang, W. Y., Wu, Y., Hui, X., Otis, R., Shang, S., Liu, Z., & Chen, L. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.017 · Cited by 86
Thermodynamic design of high-entropy refractory alloys
Melnick, A. B., & Soolshenko, V. K. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.189 · Cited by 80
Thermodynamic properties of refractory high entropy alloys
Song, H., Tian, F., & Wang, D. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.04.320 · Cited by 63
Strengthening mechanism of aluminum on elastic properties of NbVTiZr high-entropy alloys
Qiu, S. Y., Miao, N., Zhou, J., Guo, Z., & Sun, Z. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.09.003 · Cited by 62
Ab initio study of Al x MoNbTiV high-entropy alloys
Cao, P., Ni, X., Tian, F., Varga, L. K., & Vitos, L. (2015) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/27/7/075401 · Cited by 59
Isothermal oxidation mechanism of a newly developed Nb–Ti–V–Cr–Al–W–Mo–Hf alloy at 800–1200 °C
Zheng, J., Hou, X., Wang, X., Ye, M., Zheng, X., & Zheng, L. (2015) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2015.08.012 · Cited by 58
Modeling of high entropy alloys of refractory elements
del Grosso, M. F., Bozzolo, G. H., & Mosca, H. O. (2012) · Physica B Condensed Matter · doi:10.1016/j.physb.2011.12.088 · Cited by 40
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Materials for hydrogen-based energy storage – past, recent progress and future outlook
Hirscher, M., Yartys, V. A., Baricco, M., Bellosta von Colbe, J., Blanchard, D., Bowman, R. C., Broom, D. P., Buckley, C. E., Chang, F., Chen, P., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153548 · Cited by 949
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Metadata
- Authors
- Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P.
- Venue
- Journal of Materials Research
- Published
- 2018-06-08
- Volume
- 33
- Issue
- 19
- Pages
- 3092-3128
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2807029607
- Cited by
- 1,631
- References
- 95
- FWCI
- 63.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.