The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Model interatomic potentials and lattice strain in a high-entropy alloy
Abstract
A set of embedded atom method model interatomic potentials is presented to represent a high-entropy alloy with five components. The set is developed to resemble but not model precisely face-centered cubic (fcc) near-equiatomic mixtures of Fe–Ni–Cr–Co–Cu. The individual components have atomic sizes deviating up to 3%. With the heats of mixing of all binary equiatomic random fcc mixtures being less than 0.7 kJ/mol and the corresponding value for the quinary being −0.0002 kJ/mol, the potentials predict the random equiatomic fcc quinary mixture to be stable with respect to phase separation or ordering and with respect to bcc and hcp random mixtures. The details of lattice distortion, strain, and stress states in this phase are reported. The standard deviation in the individual nearest neighbor bond lengths was found to be in the range of 2%. Most importantly, individual atoms in the alloy were found to be under atomic strains up to 0.5%, corresponding to individual atomic stresses up to several GPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Interatomic potentials for monoatomic metals from experimental data and ab initio calculations
Mishin, Y., Farkas, D., Mehl, M. J., & Papaconstantopoulos, D. A. (1999) · Physical Review B · doi:10.1103/physrevb.59.3393 · Cited by 1,526
Self-citationRelative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Electronic properties of random alloys: Special quasirandom structures
Wei, S.-H., Ferreira, L. G., Bernard, J. E., & Zunger, A. (1990) · Physical Review B · doi:10.1103/physrevb.42.9622 · Cited by 1,064
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Guo, S., Hu, Q., Ng, C., & Liu, C. T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.05.002 · Cited by 800
Zhang, Y., Stocks, G. M., Jin, K., Lu, C., Bei, H., Sales, B. C., Wang, L., Béland, L. K., Stoller, R. E., Samolyuk, G. D., et al. (2015) · Nature Communications · doi:10.1038/ncomms9736 · Cited by 672
Self-citationZhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Guidelines in predicting phase formation of high-entropy alloys
Zhang, Y., Lu, Z. P., Ma, S. G., Liaw, P. K., Tang, Z., Cheng, Y. Q., & Gao, M. C. (2014) · MRS Communications · doi:10.1557/mrc.2014.11 · Cited by 401
Local lattice distortion in high-entropy alloys
Song, H., Tian, F., Hu, Q.-M., Vitos, L., Wang, Y., Shen, J., & Chen, N. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.023404 · Cited by 378
Li, Z., & Raabe, D. (2017) · JOM · doi:10.1007/s11837-017-2540-2 · Cited by 376
Searching for Next Single-Phase High-Entropy Alloy Compositions
Gao, M., & Alman, D. (2013) · Entropy · doi:10.3390/e15104504 · Cited by 349
Competing plastic deformation mechanisms in nanophase metals
Van Swygenhoven, H., Spaczer, M., Caro, A., & Farkas, D. (1999) · Physical Review B · doi:10.1103/physrevb.60.22 · Cited by 343
Self-citationA geometrical parameter for the formation of disordered solid solutions in multi-component alloys
Singh, A. K., Kumar, N., Dwivedi, A., & Subramaniam, A. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.019 · Cited by 339
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.032 · Cited by 338
Dong, Y., Lu, Y., Jiang, L., Wang, T., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.001 · Cited by 330
Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys
Tamm, A., Aabloo, A., Klintenberg, M., Stocks, M., & Caro, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.015 · Cited by 240
Self-citationLattice Distortions in the FeCoNiCrMn High Entropy Alloy Studied by Theory and Experiment
Oh, H., Ma, D., Leyson, G., Grabowski, B., Park, E., Körmann, F., & Raabe, D. (2016) · Entropy · doi:10.3390/e18090321 · Cited by 213
Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys
Zhang, Y., Zhao, S., Weber, W. J., Nordlund, K., Granberg, F., & Djurabekova, F. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.02.002 · Cited by 209
Recent Progress in High Entropy Alloy Research
MacDonald, B. E., Fu, Z., Zheng, B., Chen, W., Lin, Y., Chen, F., Zhang, L., Ivanisenko, J., Zhou, Y., Hahn, H., et al. (2017) · JOM · doi:10.1007/s11837-017-2484-6 · Cited by 183
Influence of chemical disorder on energy dissipation and defect evolution in advanced alloys
Zhang, Y., Jin, K., Xue, H., Lu, C., Olsen, R., Béland, L. K., Ullah, M. W., Zhao, S., Bei, H., Aidhy, D. S., et al. (2016) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2016.269 · Cited by 155
Self-citationA Review of Solid-Solution Models of High-Entropy Alloys Based on Ab Initio Calculations
Tian, F. (2017) · Frontiers in Materials · doi:10.3389/fmats.2017.00036 · Cited by 132
Computational modeling of high-entropy alloys: Structures, thermodynamics and elasticity
Gao, M. C., Gao, P., Hawk, J. A., Ouyang, L., Alman, D. E., & Widom, M. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.366 · Cited by 87
Interatomic potentials for ternary Nb - Ti - Al alloys
Farkas, D., & Jones, C. (1996) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/4/1/004 · Cited by 70
Self-citationAtomistic simulations in ternary Ni - Ti - Al alloys
Farkas, D., Roqueta, D., Vilette, A. L., & Ternes, K. (1996) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/4/4/003 · Cited by 63
Self-citationSimulation and Modeling in High Entropy Alloys
Toda‐Caraballo, I., Wróbel, J. S., Nguyen-Manh, D., Pérez, P., & Rivera-Díaz-del-Castillo, P. E. J. (2017) · JOM · doi:10.1007/s11837-017-2524-2 · Cited by 51
Unique Challenges for Modeling Defect Dynamics in Concentrated Solid-Solution Alloys
Zhao, S., Weber, W. J., & Zhang, Y. (2017) · JOM · doi:10.1007/s11837-017-2461-0 · Cited by 37
Cited by
Model interatomic potentials for Fe–Ni–Cr–Co–Al high-entropy alloys
Farkas, D., & Caro, A. (2020) · Journal of Materials Research · doi:10.1557/jmr.2020.294 · Cited by 295
Self-citation
Metadata
- Authors
- Farkas, D., & Caro, A.
- Venue
- Journal of Materials Research
- Published
- 2018-08-06
- Volume
- 33
- Issue
- 19
- Pages
- 3218-3225
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2886812978
- Cited by
- 318
- References
- 35
- FWCI
- 8.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.