The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Model interatomic potentials for Fe–Ni–Cr–Co–Al high-entropy alloys
Abstract
A set of embedded atom model (EAM) interatomic potentials was developed to represent highly idealized face-centered cubic (FCC) mixtures of Fe–Ni–Cr–Co–Al at near-equiatomic compositions. Potential functions for the transition metals and their crossed interactions are taken from our previous work for Fe–Ni–Cr–Co–Cu [D. Farkas and A. Caro: J. Mater. Res. 33 (19), 3218–3225, 2018], while cross-pair interactions involving Al were developed using a mix of the component pair functions fitted to known intermetallic properties. The resulting heats of mixing of all binary equiatomic random FCC mixtures not containing Al is low, but significant short-range ordering appears in those containing Al, driven by a large atomic size difference. The potentials are utilized to predict the relative stability of FCC quinary mixtures, as well as ordered L1_2 and B2 phases as a function of Al content. These predictions are in qualitative agreement with experiments. This interatomic potential set is developed to resemble but not model precisely the properties of this complex system, aiming at providing a tool to explore the consequences of the addition of a large size-misfit component into a high entropy mixture that develops multiphase microstructures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Introduction to Solid State Physics
Kittel, C., & Fan, H. Y. (1957) · American Journal of Physics · doi:10.1119/1.1934457 · Cited by 22,240
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Introduction to solid state physics
(1956) · Journal of the Franklin Institute · doi:10.1016/0016-0032(56)90703-7 · Cited by 7,151
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Handbook of Chemistry and Physics
(1937) · Journal of AOAC INTERNATIONAL · doi:10.1093/jaoac/20.1.142a · Cited by 4,741
Handbook of Chemistry and Physics,
Di Cyan, E. (1970) · Archives of Internal Medicine · doi:10.1001/archinte.1970.00310080141025 · Cited by 1,730
Interfacial phenomena in metals and alloys
(1978) · Materials Chemistry · doi:10.1016/0390-6035(78)90059-7 · Cited by 1,553
Interatomic potentials for monoatomic metals from experimental data and ab initio calculations
Mishin, Y., Farkas, D., Mehl, M. J., & Papaconstantopoulos, D. A. (1999) · Physical Review B · doi:10.1103/physrevb.59.3393 · Cited by 1,526
Self-citationWang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Zhang, Y., Stocks, G. M., Jin, K., Lu, C., Bei, H., Sales, B. C., Wang, L., Béland, L. K., Stoller, R. E., Samolyuk, G. D., et al. (2015) · Nature Communications · doi:10.1038/ncomms9736 · Cited by 672
Self-citationMehl, M. J., & Papaconstantopoulos, D. A. (1996) · Physical Review B · doi:10.1103/physrevb.54.4519 · Cited by 614
Zhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Atomistic modeling of the γ and γ′-phases of the Ni–Al system
Mishin, Y. (2004) · Acta Materialia · doi:10.1016/j.actamat.2003.11.026 · Cited by 491
Guidelines in predicting phase formation of high-entropy alloys
Zhang, Y., Lu, Z. P., Ma, S. G., Liaw, P. K., Tang, Z., Cheng, Y. Q., & Gao, M. C. (2014) · MRS Communications · doi:10.1557/mrc.2014.11 · Cited by 401
Phase separation in equiatomic AlCoCrFeNi high-entropy alloy
Manzoni, A., Daoud, H., Völkl, R., Glatzel, U., & Wanderka, N. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2012.12.015 · Cited by 385
Local lattice distortion in high-entropy alloys
Song, H., Tian, F., Hu, Q.-M., Vitos, L., Wang, Y., Shen, J., & Chen, N. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.023404 · Cited by 378
Searching for Next Single-Phase High-Entropy Alloy Compositions
Gao, M., & Alman, D. (2013) · Entropy · doi:10.3390/e15104504 · Cited by 349
Competing plastic deformation mechanisms in nanophase metals
Van Swygenhoven, H., Spaczer, M., Caro, A., & Farkas, D. (1999) · Physical Review B · doi:10.1103/physrevb.60.22 · Cited by 343
Self-citationA geometrical parameter for the formation of disordered solid solutions in multi-component alloys
Singh, A. K., Kumar, N., Dwivedi, A., & Subramaniam, A. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.019 · Cited by 339
Dong, Y., Lu, Y., Jiang, L., Wang, T., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.001 · Cited by 330
Model interatomic potentials and lattice strain in a high-entropy alloy
Farkas, D., & Caro, A. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.245 · Cited by 318
Self-citationEmbedded-atom potential forB2−NiAl
Mishin, Y., Mehl, M. J., & Papaconstantopoulos, D. A. (2002) · Physical Review B · doi:10.1103/physrevb.65.224114 · Cited by 309
Lattice Distortions in the FeCoNiCrMn High Entropy Alloy Studied by Theory and Experiment
Oh, H., Ma, D., Leyson, G., Grabowski, B., Park, E., Körmann, F., & Raabe, D. (2016) · Entropy · doi:10.3390/e18090321 · Cited by 213
Recent Progress in High Entropy Alloy Research
MacDonald, B. E., Fu, Z., Zheng, B., Chen, W., Lin, Y., Chen, F., Zhang, L., Ivanisenko, J., Zhou, Y., Hahn, H., et al. (2017) · JOM · doi:10.1007/s11837-017-2484-6 · Cited by 183
Predictive multiphase evolution in Al-containing high-entropy alloys
Santodonato, L. J., Liaw, P. K., Unocic, R. R., Bei, H., & Morris, J. R. (2018) · Nature Communications · doi:10.1038/s41467-018-06757-2 · Cited by 178
High-entropy alloys as high-temperature thermoelectric materials
Shafeie, S., Guo, S., Hu, Q., Fahlquist, H., Erhart, P., & Palmqvist, A. (2015) · Journal of Applied Physics · doi:10.1063/1.4935489 · Cited by 162
First Principles Theory of the hcp-fcc Phase Transition in Cobalt
Lizárraga, R., Pan, F., Bergqvist, L., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-03877-5 · Cited by 148
Effect of Fe Segregation on the Migration of a Non-Symmetric Σ5 Tilt Grain Boundary in Al
Mendelev, M. I., Srolovitz, D. J., Ackland, G. J., & Han, S. (2005) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2005.0024 · Cited by 144
Pun, G. P. P., Yamakov, V. I., & Mishin, Y. M. (2015) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/23/6/065006 · Cited by 100
Interatomic potentials for ternary Nb - Ti - Al alloys
Farkas, D., & Jones, C. (1996) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/4/1/004 · Cited by 70
Self-citationAtomistic simulations in ternary Ni - Ti - Al alloys
Farkas, D., Roqueta, D., Vilette, A. L., & Ternes, K. (1996) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/4/4/003 · Cited by 63
Self-citationGeneralized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy
Sun, X., Zhang, H., Li, W., Ding, X., Wang, Y., & Vitos, L. (2019) · Nanomaterials · doi:10.3390/nano10010059 · Cited by 58
Simulation and Modeling in High Entropy Alloys
Toda‐Caraballo, I., Wróbel, J. S., Nguyen-Manh, D., Pérez, P., & Rivera-Díaz-del-Castillo, P. E. J. (2017) · JOM · doi:10.1007/s11837-017-2524-2 · Cited by 51
Shafeie, S., Guo, S. L., Erhart, P., Hu, Q., & Palmqvist, A. E. C. (2018) · Advanced Materials · doi:10.1002/adma.201805392 · Cited by 40
Unique Challenges for Modeling Defect Dynamics in Concentrated Solid-Solution Alloys
Zhao, S., Weber, W. J., & Zhang, Y. (2017) · JOM · doi:10.1007/s11837-017-2461-0 · Cited by 37
Metadata
- Authors
- Farkas, D., & Caro, A.
- Venue
- Journal of Materials Research
- Published
- 2020-10-20
- Volume
- 35
- Issue
- 22
- Pages
- 3031-3040
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W3093661659
- Cited by
- 295
- References
- 44
- FWCI
- 9.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.