The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Applications and Processing of Transparent Conducting Oxides
Abstract
The first report of a transparent conducting oxide (TCO) was published in 1907, when Badeker reported that thin films of Cd metal deposited in a glow discharge chamber could be oxidized to become transparent while remaining electrically conducting. Since then, the commercial value of these thin films has been recognized, and the list of potential TCO materials has expanded to include, for example, Al-doped ZnO, GdInO x, SnO 2, F-doped In 2 O 3, and many others. Since the 1960s, the most widely used TCO for optoelectronic device applications has been tin-doped indium oxide (ITO). At present, and likely well into the future, this material offers the best available performance in terms of conductivity and transmissivity, combined with excellent environmental stability, reproducibility, and good surface morphology. The use of other TCOs in large quantities is application-specific. For example, tin oxide is now widely used in architectural glass applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hamberg, I., & Granqvist, C. G. (1986) · Journal of Applied Physics · doi:10.1063/1.337534 · Cited by 2,371
Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates
Cairns, D. R., Witte, R. P., Sparacin, D. K., Sachsman, S. M., Paine, D. C., Crawford, G. P., & Newton, R. R. (2000) · Applied Physics Letters · doi:10.1063/1.126052 · Cited by 616
Self-citation
Cited by
The surface and materials science of tin oxide
Batzill, M., & Diebold, U. (2005) · Progress in Surface Science · doi:10.1016/j.progsurf.2005.09.002 · Cited by 2,557
Hecht, D. S., Hu, L., & Irvin, G. (2011) · Advanced Materials · doi:10.1002/adma.201003188 · Cited by 2,229
Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35335k · Cited by 1,284
Highly Conductive PEDOT:PSS Nanofibrils Induced by Solution‐Processed Crystallization
Kim, N., Kee, S., Lee, S. H., Lee, B. H., Kahng, Y. H., Jo, Y., Kim, B., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201304611 · Cited by 1,148
Carbon Nanotube Thin Films: Fabrication, Properties, and Applications
Hu, L., Hecht, D. S., & Grüner, G. (2010) · Chemical Reviews · doi:10.1021/cr9002962 · Cited by 997
Metadata
- Authors
- Lewis, B. G., & Paine, D. C.
- Venue
- MRS Bulletin
- Published
- 2000-08
- Volume
- 25
- Issue
- 8
- Pages
- 22-27
- ISSN
- 0883-7694 (ISSN-L)
- 1938-1425
- OpenAlex
- W2024315874
- Cited by
- 1,026
- References
- 2
- FWCI
- 10.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.