The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes
Open accessAbstract
As the relative performance of alkali activated slag (AAS) concretes in comparison to portland cement (PC) counterparts for chloride transport and resulting corrosion of steel bars is not clear, an investigation was carried out and the results are reported in this paper. The effect of alkali concentration and modulus of sodium silicate solution used in AAS was studied. Chloride transport and corrosion properties were assessed with the help of electrical resistivity, non-steady state chloride diffusivity, onset of corrosion, rate of corrosion and pore solution chemistry. It was found that: (i) although chloride content at surface was higher for the AAS concretes, they had lower chloride diffusivity than PC concrete; (ii) pore structure, ionic exchange and interaction effect of hydrates strongly influenced the chloride transport in the AAS concretes; (iii) steel corrosion resistance of the AAS concretes was comparable to that of PC concrete under intermittent chloride ponding regime, with the exception of 6 % Na 2 O and Ms of 1.5; (iv) the corrosion behaviour of the AAS concretes was significantly influenced by ionic exchange, carbonation and sulphide concentration; (v) the increase of alkali concentration of the activator generally increased the resistance of AAS concretes to chloride transport and reduced its resulting corrosion, and a value of 1.5 was found to be an optimum modulus for the activator for improving the chloride transport and the corrosion resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Diffusion behavior of chloride ions in concrete
Zhang, T., & Gjørv, O. E. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(96)00069-5 · Cited by 114
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Wang, A., Zheng, Y., Zhang, Z., Liu, K., Li, Y., Shi, L., & Sun, D. (2020) · Engineering · doi:10.1016/j.eng.2019.08.019 · Cited by 389
Ke, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Zhang, J., Shi, C., Zhang, Z., & Ou, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.027 · Cited by 374
Chen, K., Wu, D., Xia, L., Cai, Q., & Zhang, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122496 · Cited by 277
Metadata
- Authors
- Ma, Q., Nanukuttan, S. V., Basheer, P. A. M., Bai, Y., & Yang, C.
- Venue
- Materials and Structures
- Published
- 2015-12-18
- Volume
- 49
- Issue
- 9
- Pages
- 3663-3677
- ISSN
- 0025-5432 (ISSN-L)
- 1359-5997
- 1871-6873
- OpenAlex
- W2201134347
- Cited by
- 174
- References
- 3
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes. https://app.cochat.ai/papers/10.1617/s11527-015-0747-7
- The paper
- Ma, Q., Nanukuttan, S. V., Basheer, P. A. M., Bai, Y., & Yang, C. (2016). Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes. Materials and Structures. https://doi.org/10.1617/s11527-015-0747-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.