Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
This study evaluates the chloride binding capacity and the migration of chloride in sodium carbonate-activated slag cements and mortars. The effect on chloride mobility and binding of adding a calcined layered double hydroxide (CLDH) to the binder mix was also assessed. Significantly improved durability characteristics can be achieved for sodium carbonate-activated slag mortars by the addition of small fractions of CLDH, as a consequence of a higher degree of reaction, higher chloride binding capacity, and the refined pore structures present in these modified materials, in comparison with alkali-activated cements produced without CLDH. The addition of CLDH enables the production of sodium carbonate-activated slag cements with notably reduced chloride ingress compared to silicate activated slag cements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citationHydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
The effect of supplementary cementitious materials on chloride binding in hardened cement paste
Thomas, M. D. A., Hooton, R. D., Scott, A., & Zibara, H. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.01.001 · Cited by 636 · cited 1×
“Nonetheless, chloride binding capacities of cementitious materials are normally measured in chloride solutions at near-neutral pH [29, 30].”
BackgroundMyers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L. (2013) · Langmuir · doi:10.1021/la4000473 · Cited by 579
Self-citationBernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493
Self-citationKe, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375 · cited 5×
“Both hydrotalcite-group phases and carbonateAFm phases (monocarbonate or hemicarbonate) are considered to be effective chloride binding phases [39, 46].”
BackgroundInfluentialSelf-citationRole of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334
Self-citationRecent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330 · cited 1×
“Although alkali-activated slag (AAS) cements can be produced with much lower global warming potentials than Portland cement (PC) [4], the use of sodium hydroxide and sodium silicate as”
BackgroundKe, X., Bernal, S. A., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.012 · Cited by 328 · cited 18×
“3a, the Ca/Si ratios in sodium carbonateactivated samples with and without CLDH addition are similar to each other, and slightly higher than in sodium silicate activated slag paste, in accordance with the observations in previous study without chloride exposure [14].”
BackgroundMethodResultInfluentialSelf-citationThermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240 · cited 1×
“thermodynamic modelling for the cements assessed [43].”
Self-citation
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationChen, K., Wu, D., Xia, L., Cai, Q., & Zhang, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122496 · Cited by 277
Influence of activator composition on the chloride binding capacity of alkali-activated slag
Ye, H., Huang, L., & Chen, Z. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103368 · Cited by 142
Ke, X., Bernal, S. A., Provis, J. L., & Lothenbach, B. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106158 · Cited by 117
“This value was calculated using an estimated total sample porosity of 10% [39].”
MethodSelf-citationSlag-Based Cements That Resist Damage Induced by Carbon Dioxide
Ke, X., Criado, M., Provis, J. L., & Bernal, S. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04730 · Cited by 62
Self-citation
Metadata
- Authors
- Ke, X., Bernal, S. A., Hussein, O. H., & Provis, J. L.
- Venue
- Materials and Structures
- Published
- 2017-12
- Volume
- 50
- Issue
- 6
- Pages
- 252-252
- ISSN
- 0025-5432 (ISSN-L)
- 1359-5997
- 1871-6873
- OpenAlex
- W2771159395
- Cited by
- 80
- References
- 10
- FWCI
- 6.56
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars. https://app.cochat.ai/papers/10.1617/s11527-017-1121-8
- The paper
- Ke, X., Bernal, S. A., Hussein, O. H., & Provis, J. L. (2017). Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars. Materials and Structures. https://doi.org/10.1617/s11527-017-1121-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.