The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Hydration of alkali-activated slag: comparison with ordinary Portland cement
Abstract
A multi-method approach was used for the investigation and comparison of alkali-activated slag binders (AAS), pure slag and ordinary Portland cement (OPC). X-ray fluorescence, X-ray powder diffraction, granulometry, calorimetry, thermo-gravimetric analysis and environmental scanning electron microscope investigations of the microstructure with energy dispersive X-ray analyses were used to characterise the cements and their hydrate phases. In addition, the chemical composition of the pore solution, including the different sulphur-containing ions, was analysed. The precipitation mechanisms during binder hydration in the AAS and OPC systems exhibit significant differences: in AAS the formation of the ‘outer product’ C-S-H is much faster than in OPC. The high Si concentrations in the pore solution during the early hydration of AAS are related to the fast dissolution of Na-metasilicate. The fast reaction of Na is an important factor for the voluminous precipitation of C-S-H within the interstitial space already during the first 24 h. In addition to the Na-metasilicate component, the high fineness of the slag represents a further important factor for the fast hydration of AAS. The small slag particles (< 2 μm) are completely dissolved or hydrated within the first 24 h, whereas hydration of the larger particles is much slower. The fast formation of a gel-like matrix in AAS is the product of a fast ‘through solution’ precipitation, which contrasts with the slower dissolution-precipitation mechanism of a ‘topotactic’ growth of C-S-H in OPC. The chemical and mineralogical characterisation of solid and liquid phases and their changes with time are the basis for thermodynamic modelling of the corresponding hydration process, which is presented in a second paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
The nature of C-S-H in hardened cements
Richardson, I. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00168-4 · Cited by 1,133
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Thermodynamic modelling of the hydration of Portland cement
Lothenbach, B., & Winnefeld, F. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.001 · Cited by 903
Self-citationFactors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Sodium silicate-based, alkali-activated slag mortars
Brough, A. R., & Atkinson, A. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00717-2 · Cited by 694
Expression and analysis of pore fluids from hardened cement pastes and mortars
Barneyback, R. S., & Diamond, S. (1981) · Cement and Concrete Research · doi:10.1016/0008-8846(81)90069-7 · Cited by 604
Kinetics of oxidation of aqueous sulfide by oxygen
Chen, K. Y., & Morris, J. C. (1972) · Environmental Science & Technology · doi:10.1021/es60065a008 · Cited by 592
Alkali binding in cement pastes
Hong, S.-Y., & Glasser, F. P. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00187-8 · Cited by 482
Alkali sorption by C-S-H and C-A-S-H gels
Hong, S.-Y., & Glasser, F. P. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00753-6 · Cited by 463
Cited by
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationIsmail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Self-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914
Self-citationHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Self-citationDurability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Effect of binder content on the performance of alkali-activated slag concretes
Bernal, S. A., Mejía de Gutiérrez, R., Pedraza, A. L., Provis, J. L., Rodriguez, E. D., & Delvasto, S. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.08.017 · Cited by 537
Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages
Lee, N. K., Jang, J. G., & Lee, H. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.007 · Cited by 462
Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. J. (2013) · Materials and Structures · doi:10.1617/s11527-012-9906-2 · Cited by 417
Very early-age reaction kinetics and microstructural development in alkali-activated slag
Gebregziabiher, B. S., Thomas, R., & Peethamparan, S. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.001 · Cited by 393
Bernal, S. A., Provis, J. L., Brice, D. G., Kilcullen, A., Duxson, P., & van Deventer, J. S. J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.07.002 · Cited by 385
Hydration mechanisms of super sulphated slag cement
Gruskovnjak, A., Lothenbach, B., Winnefeld, F., Figi, R., Ko, S.-C., Adler, M., & Mäder, U. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.03.004 · Cited by 378
Self-citationPore solution composition and alkali diffusion in inorganic polymer cement
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.04.008 · Cited by 355
Hydration and properties of sodium sulfate activated slag
Rashad, A. M., Bai, Y., Basheer, P. A. M., Milestone, N. B., & Collier, N. C. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.12.010 · Cited by 335
Chi, M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.005 · Cited by 335
A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation
Myers, R. J., Bernal, S. A., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.07.005 · Cited by 312
Long term durability properties of class F fly ash geopolymer concrete
Law, D. W., Adam, A. A., Molyneaux, T. K., Patnaikuni, I., & Wardhono, A. (2015) · Materials and Structures · doi:10.1617/s11527-014-0268-9 · Cited by 296
Reactivity and reaction products of alkali-activated, fly ash/slag paste
Lee, N. K., & Lee, H. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.022 · Cited by 284
Pore solution composition of alkali-activated slag/fly ash pastes
Zuo, Y., Nedeljković, M., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.010 · Cited by 274
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D. (2023) · Engineering · doi:10.1016/j.eng.2021.07.026 · Cited by 272
The interrelationship between surface chemistry and rheology in alkali activated slag paste
Kashani, A., Provis, J. L., Qiao, G. G., & van Deventer, J. S. J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.127 · Cited by 268
Thermodynamic equilibrium calculations in cementitious systems
Lothenbach, B. (2010) · Materials and Structures · doi:10.1617/s11527-010-9592-x · Cited by 258
Self-citationThermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240
Self-citationKe, X., Bernal, S. A., Provis, J. L., & Lothenbach, B. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106158 · Cited by 117
Self-citation
Metadata
- Authors
- Gruskovnjak, A., Lothenbach, B., Holzer, L., Figi, R., & Winnefeld, F.
- Venue
- Advances in Cement Research
- Publisher
- Emerald
- Published
- 2006-07
- Volume
- 18
- Issue
- 3
- Pages
- 119-128
- ISSN
- 0951-7197 (ISSN-L)
- 1751-7605
- OpenAlex
- W2105003203
- Cited by
- 349
- References
- 24
- FWCI
- 14.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.