The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Geotechnical stability analysis
Abstract
This paper describes recent advances in stability analysis that combine the limit theorems of classical plasticity with finite elements to give rigorous upper and lower bounds on the failure load. These methods, known as finite-element limit analysis, do not require assumptions to be made about the mode of failure, and use only simple strength parameters that are familiar to geotechnical engineers. The bounding properties of the solutions are invaluable in practice, and enable accurate limit loads to be obtained through the use of an exact error estimate and automatic adaptive meshing procedures. The methods are very general, and can deal with heterogeneous soil profiles, anisotropic strength characteristics, fissured soils, discontinuities, complicated boundary conditions, and complex loading in both two and three dimensions. A new development, which incorporates pore water pressures in finite-element limit analysis, is also described. Following a brief outline of the new techniques, stability solutions are given for several practical problems, including foundations, anchors, slopes, excavations and tunnels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Simplex Method for Function Minimization
Nelder, J. A., & Mead, R. (1965) · The Computer Journal · doi:10.1093/comjnl/7.4.308 · Cited by 28,905
Function minimization by conjugate gradients
Fletcher, R. (1964) · The Computer Journal · doi:10.1093/comjnl/7.2.149 · Cited by 4,939
Powell, M. J. D. (1964) · The Computer Journal · doi:10.1093/comjnl/7.2.155 · Cited by 4,632 · cited 1×
“…yield constraints directly, converted the constrained optimisation problem to an unconstrained one using the extended penalty method of Kavlie & Moe (1971), and computed the optimal solution (best lower bound) using a variant of the sequential unconstrained minimisation technique (Powell, 1964).”
MethodThe use of the Slip Circle in the Stability Analysis of Slopes
Bishop, A. W. (1955) · Géotechnique · doi:10.1680/geot.1955.5.1.7 · Cited by 2,793
Free and Moving Boundary Problems.
Cryer, C. C., & Crank, J. (1986) · Mathematics of Computation · doi:10.2307/2008018 · Cited by 2,147
Slope stability analysis by finite elements
Griffiths, D. V., & Lane, P. A. (1999) · Géotechnique · doi:10.1680/geot.1999.49.3.387 · Cited by 2,062
The Analysis of the Stability of General Slip Surfaces
Morgenstern, N. R., & Price, V. E. (1965) · Géotechnique · doi:10.1680/geot.1965.15.1.79 · Cited by 2,003
A Method of analysis of the Stability of Embankments Assuming Parallel Inter-Slice Forces
Spencer, E. (1967) · Géotechnique · doi:10.1680/geot.1967.17.1.11 · Cited by 1,179
On numerically accurate finite element solutions in the fully plastic range
Nagtegaal, J. C., Parks, D. M., & Rice, J. R. (1974) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(74)90032-2 · Cited by 980
Soil Strength and Slope Stability
Duncan, J. M., & Wright, S. G. (2005) · Cited by 969
Metadata
- Authors
- SLOAN, S. W.
- Venue
- Géotechnique
- Publisher
- Emerald
- Published
- 2013-06
- Volume
- 63
- Issue
- 7
- Pages
- 531-571
- ISSN
- 0016-8505 (ISSN-L)
- 1751-7656
- OpenAlex
- W2036239283
- Cited by
- 726
- References
- 15
- FWCI
- 54.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Geotechnical stability analysis. https://app.cochat.ai/papers/10.1680/geot.12.rl.001
- The paper
- SLOAN, S. W. (2013). Geotechnical stability analysis. Géotechnique. https://doi.org/10.1680/geot.12.rl.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.