Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 2,062

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Slope stability analysis by finite elements

Griffiths, D. V., Lane, P. A.·1999·Géotechnique

Abstract

The majority of slope stability analyses performed in practice still use traditional limit equilibrium approaches involving methods of slices that have remained essentially unchanged for decades. This was not the outcome envisaged when Whitman & Bailey (1967) set criteria for the then emerging methods to become readily accessible to all engineers. The finite element method represents a powerful alternative approach for slope stability analysis which is accurate, versatile and requires fewer a priori assumptions, especially, regarding the failure mechanism. Slope failure in the finite element model occurs 'naturally' through the zones in which the shear strength of the soil is insufficient to resist the shear stresses. The paper describes several examples of finite element slope stability analysis with comparison against other solution methods, including the influence of a free surface on slope and dam stability. Graphical output is included to illustrate deformations and mechanisms of failure. It is argued that the finite element method of slope stability analysis is a more powerful alternative to traditional limit equilibrium methods and its widespread use should now be standard in geotechnical practice. En grande majorité, les analyses de stabilité de pente menées dans la pratique continuent à utiliser les méthodes traditionnelles d'équilibre limite et des systèmes de tranches qui n'ont pratiquement pas changé depuis des dizaines d'années. Ce n'était pas le résultat envisagé quand Whitman et Bailey (1967) ont établi des critères pour que ces méthodes alors émergeantes puissent devenir facilement accessibles à tous les ingénieurs. La méthode d'éléments finis qui représente une alternative puissante pour les analyses de stabilité de pente, est exacte, polyvalente et demande moins d'hypothèses ‘a priori’, surtout en ce qui concerne les mécanismes de rupture. La rupture de pente dans le modèle à éléments finis se produit ‘naturellement’ à travers des zones dans lesquelles la résistance au cisaillement du sol est insuffisante pour résister aux contraintes tangentielles. Cet exposé décrit plusieurs exemples d'analyses de stabilité de pente utilisant les éléments finis et établit des comparaisons avec d'autres méthodes, comme l'influence d'une surface libre sur la stabilité d'une pente et d'une digue. Nous joignons une représentation graphique pour illustrer les déformations et mécanismes de rupture. Nous avançons que la méthode d'éléments finis pour analyser la stabilité des pentes constitue une alternative plus puissante aux méthodes traditionnelles d'équilibre limite et que son utilisation devrait maintenant devenir une pratique standard en géotechnique.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1680/geot.1999.49.3.387

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 2,062

Metadata

Authors
Griffiths, D. V., & Lane, P. A.
Venue
Géotechnique
Publisher
Emerald
Published
1999-06
Volume
49
Issue
3
Pages
387-403
ISSN
  • 0016-8505 (ISSN-L)
  • 1751-7656
OpenAlex
W2161064703
Cited by
2,062
References
1
FWCI
28.55
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Slope stability analysis by finite elements. https://app.cochat.ai/papers/10.1680/geot.1999.49.3.387
The paper
Griffiths, D. V., & Lane, P. A. (1999). Slope stability analysis by finite elements. Géotechnique. https://doi.org/10.1680/geot.1999.49.3.387

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.