The DOI matches its Crossref record.
Compression model for cohesionless soils
Abstract
A simple four-parameter elasto-plastic model describes the non-linear volumetric behaviour of freshly deposited cohesionless soils in hydrostatic and one-dimensional compression. It expresses the tangent bulk modulus as a separable function of the current void ratio and mean effective stress using natural strains. Specimens compressed from different initial formation densities approach a unique response at high stress levels—the limiting compression curve (LCC)—which is linear in a double logarithmic void ratio-effective stress space. The model describes irrecoverable, plastic strains which develop throughout first loading and represent mechanisms ranging from particle sliding and rolling at low stresses to crushing—the principal component of deformation for LCC states. The three input parameters describing plastic deformation can be readily estimated from a hydrostatic or one-dimensional compression test loaded to high stress levels; the elastic bulk modulus requires accurate small strain measurements in unloading. The model can be further simplified at low stress levels where compressive behaviour is controlled primarily by the formation density. Input parameters for a wide range of cohesionless soils are presented from which it is possible to infer the effects of particle mineralogy, size, grading and shape on compressibility. The model gives excellent predictions of measured compressive behaviour over a wide range of stresses and densities, and provides a useful basis for the construction of hardening rules for generalized constitutive models. KEYWORDS: compressibility; constitutive relations; plasticity; sands. Un modèle élastoplastique simple à quatre paramétres permet de décrire le comportement volumique non-linéaire de sols fraîchement déposés, sous des conditions de compression hydrostatique ou unidimensionelle. Il exprime, à partir des déformations naturelles, que le module matriciel tangent est fonction de l'indice des vides courant et de la contrainte effective moyenne. Les échantillons, comprimés avec différentes valeurs initiales de den-sité, tendent vers une même réponse aux fortes contraintes—la `limiting compression curve' (LCC) —réprésentée par une droite dans le diagramme biologarithmique indice des vides-contrainte effective'. Le modéle décrit les déformations plastiques irréversibles qui se développent tout au long de la premiére mise en charge, et les mécanismes présents, depuis le glissement et la rotation des particules, sous faibles contraintes, jusqu'au broyage (mécanisme principal de déformation aux états LCC). Les trois paramétres d'entrée décrivant la déformation plastique peuvent 7eacute;tre estimés à partir d'essais de compression hydrostatiques ou unidimensionels réalisés à fortes contraintes. La determination du module élastique demande une mesure trés précise des petites déformations lors du déchargement. Ce modéle peut étre simplifié pour les faibles contraintes pour lesquelles le comportement en compression est essentiellement contrôlé par la masse volumique de la formation. L'article présente, pour une large gamme de sols pulvérulents, plusieurs paramétres d'entrée permettant d'étudier l'influence de la minéralogie, de la forme et de la granulométrie des particules sur la compressibilité. Le modéle présenté permet de prévoir avec grande précision le comportement en compression mesuré pour une large gamme de contraintes et de densités. II fournit également une base indispensable à l'établissement de lois de durcissment pour des modeles constitutifs généralisés.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Metadata
- Authors
- Pestana, J. M., & Whittle, A. J.
- Venue
- Géotechnique
- Publisher
- Emerald
- Published
- 1995-12
- Volume
- 45
- Issue
- 4
- Pages
- 611-631
- ISSN
- 0016-8505 (ISSN-L)
- 1751-7656
- OpenAlex
- W2033449682
- Cited by
- 364
- References
- 0
- FWCI
- 7.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Compression model for cohesionless soils. https://app.cochat.ai/papers/10.1680/geot.1995.45.4.611
- The paper
- Pestana, J. M., & Whittle, A. J. (1995). Compression model for cohesionless soils. Géotechnique. https://doi.org/10.1680/geot.1995.45.4.611
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.