The DOI matches its Crossref record.
Compressive strength of concrete at high temperatures: a reassessment
Abstract
Based on experience with siliceous aggregate/OPC paste concrete it is generally believed that the compressive strength of unsealed ‘concrete’ declines sharply above 300°C. This is too pessimistic a view. A reassessment of the subject is given in this Paper, which considers material and environmental factors/mechanisms influencing the strength of concrete during the heat cycle and after cooling, not all of which necessarily result in strength loss. Design of concrete for better performance at high temperatures should aim at minimizing contributions to strength loss, while exploiting the processes responsible for gain in strength. It appears that, in its hydraulic state of binding, a rheological criterion limits the structural usefulness of Portland cement concrete to temperatures of 600°C. Today, many commonly used concretes lose considerable strength at temperatures above about 300°C. There is, therefore, scope for improvement in design within the temperature range 300— 600°C. Raising the ‘working’ temperature of the material means that a significantly larger proportion of a structure exposed to high temperatures will remain serviceable and reparable, thus bringing about significant economic benefits.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The use of thermal analysis in assessing the effect of temperature on a cement paste
Alarcon-Ruiz, L., Platret, G., Massieu, E., & Ehrlacher, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.015 · Cited by 1,074
Effect of fire on concrete and concrete structures
Khoury, G. A. (2000) · Progress in Structural Engineering and Materials · doi:10.1002/pse.51 · Cited by 802
Self-citationSpalling and pore pressure in HPC at high temperatures
Kalifa, P., Menneteau, F.-D., & Quenard, D. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00384-7 · Cited by 700
Behaviour of cement concrete at high temperature
Hager, I. (2013) · Bulletin of the Polish Academy of Sciences: Technical Sciences · doi:10.2478/bpasts-2013-0013 · Cited by 491
Chan, Y. N., Peng, G. F., & Anson, M. (1999) · Cement and Concrete Composites · doi:10.1016/s0958-9465(98)00034-1 · Cited by 458
A critical review of geopolymer properties for structural fire-resistance applications
Lahoti, M., Tan, K. H., & Yang, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.076 · Cited by 431
Handoo, S. K., Agarwal, S., & Agarwal, S. K. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00736-0 · Cited by 366
Khaliq, W., & Kodur, V. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.012 · Cited by 354
A review of mechanical properties of fibre reinforced concrete at elevated temperatures
Wu, H., Lin, X., & Zhou, A. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106117 · Cited by 328
Chan, Y. N., Luo, X., & Sun, W. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00240-9 · Cited by 327
Yazıcı, H. (2007) · Building and Environment · doi:10.1016/j.buildenv.2006.03.013 · Cited by 312
Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars
Aydın, S., & Baradan, B. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.02.005 · Cited by 271
Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review
Ahmad, J., & Zhou, Z. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127353 · Cited by 266
Recycling of Demolished Masonry Rubble as Coarse Aggregate in Concrete: Review
Khalaf, F. M., & DeVenny, A. S. (2004) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2004)16:4(331 · Cited by 262
Malik, M., Bhattacharyya, S. K., & Barai, S. V. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121398 · Cited by 259
Şahmaran, M., Özbay, E., Yücel, H. E., Lachemi, M., & Li, V. C. (2011) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000335 · Cited by 252
Properties of cement mortars containing clinoptilolite as a supplementary cementitious material
Bilim, C. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.02.006 · Cited by 127
Metadata
- Authors
- Khoury, G. A.
- Venue
- Magazine of Concrete Research
- Publisher
- Emerald
- Published
- 1992-12
- Volume
- 44
- Issue
- 161
- Pages
- 291-309
- ISSN
- 0024-9831 (ISSN-L)
- 1751-763X
- OpenAlex
- W2098422296
- Cited by
- 602
- References
- 0
- FWCI
- 4.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.