Routing Information Protocol

Abstract

Status of this MemoThis RFC describes an existing protocol for exchanging routing information among gateways and other hosts.It is intended to be used as a basis for developing gateway software for use in the Internet community.Distribution of this memo is unlimited.Table of Contents RFC 1058 Routing Information Protocol June 1988all implementations of this protocol.-Suggest some optional features to allow greater configurability and control.These features were developed specifically to solve problems that have shown up in actual use by the NSFnet community.However, they should have more general utility.The Routing Information Protocol (RIP) described here is loosely based on the program "routed", distributed with the 4.3 Berkeley Software Distribution.However, there are several other implementations of what is supposed to be the same protocol.Unfortunately, these various implementations disagree in various details.The specifications here represent a combination of features taken from various implementations.We believe that a program designed according to this document will interoperate with routed, and with all other implementations of RIP of which we are aware.Note that this description adopts a different view than most existing implementations about when metrics should be incremented.By making a corresponding change in the metric used for a local network, we have retained compatibility with other existing implementations.See section 3.6 for details on this issue.