The DOI matches its Crossref record.
Home Automation Routing Requirements in Low-Power and Lossy Networks
Abstract
This document presents requirements specific to home control and automation applications for Routing Over Low power and Lossy (ROLL) networks. In the near future, many homes will contain high numbers of wireless devices for a wide set of purposes. Examples include actuators (relay, light dimmer, heating valve), sensors (wall switch, water leak, blood pressure), and advanced controllers (radio-frequency-based AV remote control, central server for light and heat control). Because such devices only cover a limited radio range, routing is often required. The aim of this document is to specify the routing requirements for networks comprising such constrained devices in a home-control and automation environment. Status of This Memo This document is not an Internet Standards Track specification; it is published for informational purposes. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Performance analysis of the RPL Routing Protocol
Accettura, N., Grieco, L. A., Boggia, G., & Camarda, P. (2011) · 2011 IEEE International Conference on Mechatronics · doi:10.1109/icmech.2011.5971218 · Cited by 346
Ghaleb, B., Al-Dubai, A. Y., Ekonomou, E., Alsarhan, A., Nasser, Y., Mackenzie, L. M., & Boukerche, A. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2874356 · Cited by 333
Gaddour, O., & Koubâa, A. (2012) · Computer Networks · doi:10.1016/j.comnet.2012.06.016 · Cited by 323
A survey of routing protocols for smart grid communications
Saputro, N., Akkaya, K., & Uludag, S. (2012) · Computer Networks · doi:10.1016/j.comnet.2012.03.027 · Cited by 311
Operating Systems for Low-End Devices in the Internet of Things: A Survey
Hahm, O., Baccelli, E., Petersen, H., & Tsiftes, N. (2016) · IEEE Internet of Things Journal · doi:10.1109/jiot.2015.2505901 · Cited by 304
Metadata
- Authors
- Brandt, A., Buron, J., & Porcu, G.
- Publisher
- RFC Editor
- Published
- 2010-04
- OpenAlex
- W2263923767
- Cited by
- 226
- References
- 0
- Type
- report
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Home Automation Routing Requirements in Low-Power and Lossy Networks. https://app.cochat.ai/papers/10.17487/rfc5826
- The paper
- Brandt, A., Buron, J., & Porcu, G. (2010). Home Automation Routing Requirements in Low-Power and Lossy Networks. https://doi.org/10.17487/rfc5826
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
