VS30 Estimates Using Constrained H/V Measurements
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Most seismic codes adopt the average shear-wave velocity as a key parameter \nin the first 30 m of subsoil (VS30). Estimates of VS30 are therefore required for \nboth large- and small-scale seismic microzonation. We propose a technique to measure \nthe VS30 based on the horizontal to vertical spectral ratio (H/V) of microtremor \nrecorded at a single station. The H/V is fitted with a synthetic curve using the independently \nknown thickness of a superficial layer of the subsoil as a constraint. The \nproposed procedure consists of three steps: (1) identify the depth of a shallow stratigraphic \nhorizon from independent geotechnical data, (2) identify its corresponding \nH/V marker, and (3) use it as a constraint to fit the experimental H/V curve with \nthe theoretical one. The synthetic H/V curve is calculated by assuming a stratified \none-dimensional (1D) soil model and a tremor wave field from distant random sources \nthat are composed of Rayleigh and Love waves. This technique has been validated on \ndifferent geological settings following a triple check procedure: (1) the theoretical \nRayleigh-wave phase velocity dispersion curves calculated for the model derived from \nthe H/V fit were compared to the experimental curves measured with the 2D extended \nspatial autocorrelation (ESAC) method and the 1D refraction microtremor (ReMi) array \nsurveys; (2) the VS profiles and (3) the VS30 estimates obtained by the proposed \ntechnique were compared to those obtained by using the latter array techniques. Finally, \nthe inferred stratigraphy was compared to the geological model. The proposed \ntechnique is not meant to provide accurate VS profiles but has the potential to provide \nVS30 estimates that are coherent with those measured through ESAC and ReMi and to \nsatisfy law requirements. Furthermore, the H/V is found to be capable in detecting \ndeviations from 1D subsoil geometry over the length of a few meters, the correctness \nof which was confirmed by direct drilling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
Metadata
- Authors
- Castellaro, S., & Mulargia, F.
- Venue
- Bulletin of the Seismological Society of America
- Published
- 2009-04-01
- Volume
- 99
- Issue
- 2A
- Pages
- 761-773
- ISSN
- 0037-1106 (ISSN-L)
- OpenAlex
- W2039687839
- Cited by
- 185
- References
- 1
- FWCI
- 5.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: VS30 Estimates Using Constrained H/V Measurements. https://app.cochat.ai/papers/10.1785/0120080179
- The paper
- Castellaro, S., & Mulargia, F. (2009). VS30 Estimates Using Constrained H/V Measurements. Bulletin of the Seismological Society of America. https://doi.org/10.1785/0120080179
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.