Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 26 of the 27 references it cites were found in a registry or an index, and 1 are not checked yet; none of the 14 sources its claims cite is checked for support yet.

HydroMT: Automated and reproducible model building and analysis

Open access

Abstract

Many impact assessment studies rely on hydrological and hydrodynamic (hydro) models.These models typically require a large set of parameters derived from different datasets and hence manual setup can be time consuming and hard to reproduce.HydroMT (Hydro Model Tools) is an open-source Python package that aims to make the process of building model instances and analyzing model results automated and reproducible.The package provides a common interface to data and model instances, workflows to transform data into models based on (hydrological) GIS and statistical methods, and various methods to analyze model results.The user can describe a full model instance including its forcing in a single configuration file based on a sequence of workflows, making the process reproducible, fast, and modular.The package has been designed with an iterative, data-centered modeling process in mind.First-order model schematizations can be built for any location in the world by leveraging open global datasets.These can later be improved by updating the input datasets with detailed local datasets.This iterative process enables the user to quickly get an initial result to then make informed decisions about the most relevant improvements and/or required data collection and to kick-start discussions with stakeholders.Furthermore, model parameter maps or forcing data can easily be modified for sensitivity analysis or calibration to support these robust modeling practices.HydroMT is successfully being used for several model software through a plugin infrastructure that allow for model specific functionality, such as readers and writers of model data formats, and can easily be extended to new model software.Currently supported model software include the distributed rainfall-runoff model Wflow, the hydrodynamic flood model SFINCS, the water quality models D-Water Quality and D-Emissions and the flood impact model Delft-FIAT.

Checked 2026-11-18 · 1 reference not checked yet

Overview

CoChat Summary

TL;DR

HydroMT is an open-source Python package that automates and makes reproducible the building and analysis of hydrological and hydrodynamic model instances from heterogeneous input data. It provides a data- and model-agnostic interface, a high-level command line interface, and a plugin infrastructure currently supporting Wflow, SFINCS, D-Water Quality, D-Emissions, and Delft-FIAT.

Key findings

  • HydroMT lets a user describe a full model instance, including forcing, in a single configuration file based on a sequence of workflows, making setup "reproducible, fast, and modular."
  • It is data- and model-agnostic: data sources can be interchanged without additional coding, and generic workflows (e.g., Manning roughness from landuse maps, model skill statistics) can be reused across different model software.
  • First-order model schematizations can be built for any location in the world using open global datasets, then improved iteratively with detailed local datasets.
  • The package is successfully used for several model software via a plugin infrastructure; currently supported software are Wflow, SFINCS, D-Water Quality, D-Emissions, and Delft-FIAT.

Methods

  • Design: a software architecture with three components — Input Data (Data Adapter and data catalogs), Models (model-agnostic Model API with maps, geometries, forcings, results, states, and simulation configuration), and Methods and workflows (low-level GIS/statistical methods combined into workflows).
  • Data handling: four input data types are supported, each mapped to a Python object — gridded datasets (RasterDataset), tables (Pandas DataFrame), vector datasets (GeoDataFrame), and time series with geolocations (GeoDataset); datasets are listed in a user-defined yaml data catalog, with predefined global catalogs also provided.
  • Usage: building a model instance involves four steps — define input data in a yaml catalog, define the region (bounding box, geometry, or on-the-fly delineated basin), configure the model in an ini file listing workflows in execution order, then run the build method from command line or Python.

Limitations

  • The paper states no explicit limitations section. It notes that not all datasets in the predefined data catalogs are openly accessible, and that while the package is general enough to support model software outside the hydro domain, "the focus of many workflows is on typical hydrological data and parameters and hence hydro models benefit most from the tool."
  • Evident from the text: the analysis functionality is described as "in progress," and the paper reports no quantitative evaluation, benchmarking, or accuracy results for the package.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.21105/joss.04897

Cites

26 of 27 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Schematic overview of HydroMT design.
Figure 1 Schematic overview of HydroMT design.CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Figure 2 Workflow of building a model from scratch with HydroMT.
Figure 2 Workflow of building a model from scratch with HydroMT.CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 10 Not valid · 9 Not checked · 36 Own results and interpretations

10 references still to check

A free account verifies the references that are still open.

Verify all 10 references — free account
  • Probably not a substantial claim. 43
  • It may state two separate claims as one. 19

Create a free account to see these claims.

Citations

Cites

Show all 26 references

Cited by

See all 57

Metadata

Authors
Eilander, D., Boisgontier, H., Bouaziz, L. J. E., Buitink, J., Couasnon, A., Dalmijn, B., Hegnauer, M., de Jong, T., Loos, S., Marth, I., & van Verseveld, W.
Affiliations
Deltares (NL)
Venue
Journal of Open Source Software
Published
2023-03-07
Volume
8
Issue
83
Pages
4897
ISSN
2475-9066 (ISSN-L)
OpenAlex
W4323355787
Cited by
53
References
26
Citations by year
2026: 17 · 2025: 12 · 2024: 16 · 2023: 8
FWCI
4.16
Type
journal article
Language
en
Open access
Locations
  • The Journal of Open Source Software (publishedVersion, cc-by)
  • VU Research Portal (submittedVersion, other-oa)
  • Zenodo (CERN European Organization for Nuclear Research)
Funders
  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek (016.161.324)
  • Deltares
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
  • Physical Sciences › Environmental Science › Management, Monitoring, Policy and Law › Environmental Monitoring and Data Management
  • Physical Sciences › Environmental Science › Global and Planetary Change › Flood Risk Assessment and Management
Keywords
hydrological modeling, hydrodynamic modeling, reproducible workflows, open-source Python package, model calibration, sensitivity analysis, forcing data, model parameterization, Wflow, SFINCS, flood impact assessment

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.