CoChat

Eliminating Buoyant Migration of Sequestered CO2 Through Surface Dissolution: Implementation Costs and Technical Challenges

Burton, McMillan, Bryant, Steven L. · 2009 · SPE Reservoir Evaluation & Engineering
Cited by 85

The DOI matches its Crossref record.

Abstract

Summary: Sequestration of carbon dioxide (CO2) in geologic formations will be part of any substantive campaign to mitigate greenhouse gas emissions. The risk of leakage from the target formation must be weighed against economic feasibilities for this technology to gain stakeholder acceptance. The standard approach to large-scale geologic sequestration into saline aquifers assumes that CO2 will be injected as a bulk phase. In this case, the primary driver for leakage is the buoyancy of CO2 under typical deep-reservoir conditions (depths > 2,600 ft or 800 m). Investigating alternative approaches that use inherently safe trapping mechanisms can help to characterize the price of reducing the risk of leakage. In this paper, we examine a process in which CO2 is dissolved in brine before injection into deep subsurface formations. The CO2-laden brine is slightly denser than brine containing no CO2, so the complete dissolution of all CO2 into brine at the surface before injection will eliminate the risk of buoyancy-driven leakage. The process considered here involves dissolving CO2 at surface facilities. We determine the capital costs for the additional facilities and compare them the capital costs for injecting bulk-phase CO2. We also estimate the power requirements to determine the additional operating costs. The additional capital and operating costs can be regarded as the price of this form of risk reduction. Comparing this alternative to the standard, we find that an additional power consumption of 3 to 9% of the power plant capacity will be required, and the capital costs will increase by approximately 60%. Brine is required at rates of millions of barrels per day and would be lifted from the target aquifer. The bulk volume of the aquifer is on the order of a hundred million acre-ft for reasonable power plant sizes (250 to 1,000 MW) and for reasonable injection periods (30 to 50 years). Although this alternative results in higher costs, surface dissolution may be attractive when the costs of monitoring or ensuring against buoyancy-driven CO2 leakage exceed these additional costs.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2118/110650-pa

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Burton, M., & Bryant, S. L.
Venue
SPE Reservoir Evaluation & Engineering
Published
2009-05-31
Volume
12
Issue
03
Pages
399-407
ISSN
  • 1094-6470 (ISSN-L)
  • 1930-0212
OpenAlex
W2154694725
Cited by
85
References
0
FWCI
3.84
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.