Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 308

The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.

Closed-Loop Reservoir Management

Jansen, J. D., Douma, S. D., Brouwer, D. R., Van den Hof, P. M. J., Bosgra, O. H., Heemink, A. W. · 2009 · SPE Reservoir Simulation Symposium

Abstract

Closed-loop reservoir management is a combination of model-based optimization and data assimilation (computer-assisted history matching), also referred to as ‘real-time reservoir management’, ‘smart reservoir management’ or ‘closed-loop optimization’. The aim is to maximize reservoir performance, in terms of recovery or financial measures, over the life of the reservoir by changing reservoir management from a periodic to a near-continuous process. The key sources of inspiration for our work are measurement and control theory as used in the process industry and data assimilation techniques as used in meteorology and oceanography. We present results of a numerical example to illustrate the scope for closed-loop water flooding using real-time production data under uncertain reservoir conditions. The example concerns a 12-well water flood in a channelized reservoir. Optimization was performed using a reservoir simulator with functionality for adjoint-based life cycle optimization under rate and pressure constraints. Data assimilation was performed using the ensemble Kalman filter. Applying an optimization frequency of respectively once per 4 years, once per 2 years, once per year and once per 30 days resulted in an increase of net present value (NPV) with 6.68, 8.29, 8.30 and 8.71% compared to a conventional reactive control strategy. Moreover, the results for the 30-day cycle were very close (0.15% lower NPV) to those obtained by open-loop optimization using the ‘true’ reservoir model. We illustrate that for closed-loop reservoir management with a fixed well configuration, the use of considerably different reservoir models may lead to near-identical results in terms of NPV. This implies that in such cases the essential information may be represented with a much less complex model than suggested by the large number of grid blocks in typical reservoir models. We also illustrate that the optimal rates and pressures as obtained by open- or closed-loop optimization are often too irregular to be practically applicable. Fortunately, just as is the case for the data assimilation problem, the flooding optimization problem usually contains many more control variables than necessary, allowing for optimization of long-term reservoir performance while maintaining freedom to perform short-term production optimization.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2118/119098-ms

Cites

21 of 21 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 308

Metadata

Authors
Jansen, J. D., Douma, S. D., Brouwer, D. R., Van den Hof, P. M. J., Bosgra, O. H., & Heemink, A. W.
Venue
SPE Reservoir Simulation Symposium
Publisher
SPE
Published
2009-02-02
OpenAlex
W1988729251
Cited by
308
References
21
FWCI
32.88
Type
conference paper
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.