The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Impact of Shale Properties on Pore Structure and Storage Characteristics
Abstract
Characterising the pore structure of gas shales is of critical importance to establish the original gas in place and flow characteristics of the rock matrix. Methods of measuring pore volume, pore size distribution, and sorptive capacity of shales, inherited from the coalbed methane and conventional reservoir rock analyses, although widely applied, are of limited value in characterising many shales Helium which is routinely used to measure shale skeletal and grain density, permeability and diffusivity, has greater access to the fine pore structure of shale than larger molecules such as methane. Utilizing gases other than He to measure porosity or flux requires corrections for sorption to be incorporated in the analyses. Since the permeability of shales vary by several orders of magnitude with effective stress, methods that do not consider effective stress such as crushed permeability, permeability from Hg porosimetry, and from desorption are of limited utility and may be at best instructional. For shales investigated to date, clay-rich rocks have higher porosity and permeability than biogenic silica-rich shales or carbonate-rich shales. Shales rich in detrital quartz have higher porosity and permeability than shales rich in biogenic quartz and hence simply knowing the mineralogy of a shale may not be diagnostic. The porosity of most shales is mainly dependent on the degree of pore volume development in pores less than 10 um. Quantifying total gas in place in shales by much of the industry using coal desorption methods and porosity and water saturation determinations, developed for conventional reservoir rocks, may lead to substantial errors. Canister ‘desorption' methods applied to gas shales routinely captures free and solution gas as well as sorbed gas which, if considered as only sorbed gas, results in a significant overestimation of gas in place. A proprietary method of analyses, referred to as MARIO, results in rigorous total gas in place determinations that avoids errors including those associated with molecular sieving and provides a maximum value of the sorbed gas contribution to total gas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material
Washburn, E. W. (1921) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.7.4.115 · Cited by 1,873
Dubinin, M. M. (1989) · Carbon · doi:10.1016/0008-6223(89)90078-x · Cited by 704
Permeability of crystalline and argillaceous rocks
Brace, W. F. (1980) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(80)90807-4 · Cited by 671
Shale gas potential of the Lower Jurassic Gordondale Member, northeastern British Columbia, Canada
Ross, D. J. K., & Bustin, R. M. (2007) · Bulletin of Canadian Petroleum Geology · doi:10.2113/gscpgbull.55.1.51 · Cited by 481
Self-citationPermeability and petrophysical properties of 30 natural mudstones
Yang, Y., & Aplin, A. C. (2007) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2005jb004243 · Cited by 303
Mercury porosimetry: state of the art
Van Brakel, J., Modrý, S., & Svatá, M. (1981) · Powder Technology · doi:10.1016/0032-5910(81)85001-2 · Cited by 281
THE MICROPORE SIZE DISTRIBUTIONS OF CLAY MINERAL SYSTEMS
Aylmore, L. A. G., & Quirk, J. P. (1967) · Journal of Soil Science · doi:10.1111/j.1365-2389.1967.tb01481.x · Cited by 120
The application of small angle scattering techniques to porosity characterization in carbons
CALO, J. M., & Hall, P. J. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.030 · Cited by 88
Porosities, Permeabilities, and Microfabrics of Devonian Shales
Davies, D. K., Bryant, W. R., Vessell, R. K., & Burkett, P. J. (1991) · Frontiers in sedimentary geology · doi:10.1007/978-1-4612-4428-8_10 · Cited by 36
Cited by
Clarkson, C. R., Solano, N., Bustin, R. M., Bustin, A. M. M., Chalmers, G. R. L., He, L., Melnichenko, Y. B., Radliński, A. P., & Blach, T. P. (2013) · Fuel · doi:10.1016/j.fuel.2012.06.119 · Cited by 1,757
Self-citationSpecific surface area and pore‐size distribution in clays and shales
Kuila, U., & Prasad, M. (2013) · Geophysical Prospecting · doi:10.1111/1365-2478.12028 · Cited by 1,126
Characterization and Analysis of Porosity and Pore Structures
Anovitz, L. M., & Cole, D. R. (2015) · Reviews in Mineralogy and Geochemistry · doi:10.2138/rmg.2015.80.04 · Cited by 1,090
Characterization of tight gas reservoir pore structure using USANS/SANS and gas adsorption analysis
Clarkson, C. R., Freeman, M., He, L., Agamalian, M., Melnichenko, Y. B., Mastalerz, M., Bustin, R. M., Radliński, A. P., & Blach, T. P. (2012) · Fuel · doi:10.1016/j.fuel.2011.12.010 · Cited by 501
Self-citationNew Pore-scale Considerations for Shale Gas in Place Calculations
Ambrose, R. J., Hartman, R. C., Diaz-Campos, M., Akkutlu, I. Y., & Sondergeld, C. H. (2010) · SPE Unconventional Gas Conference · doi:10.2118/131772-ms · Cited by 477
Metadata
- Authors
- Bustin, R. M., Bustin, A. M. M., Cui, X., Ross, D. J. K., & Pathi, V. S. M.
- Venue
- SPE Shale Gas Production Conference
- Publisher
- SPE
- Published
- 2008-11-16
- OpenAlex
- W2037041665
- Cited by
- 514
- References
- 12
- FWCI
- 25.43
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.