The DOI matches its Crossref record.
Acoustic Character Logs and Their Applications in Formation Evaluation
Abstract
Examples are presented which show that the velocity, amplitude, attenuation and apparent frequency of several acoustic waves can be recorded in the borehole. Examination of such recordings, termed "character" logs, indicates that the wave types observed include a refracted compressional wave and a wave which travels with formation shear velocity.Laboratory data are used to show that compressional and shear wave velocities are dependent on porosity, effective stress and lithology; but that the change in reciprocal velocity per unit change in porosity is larger for shear waves than for compressional waves. We, therefore, conclude that the accuracy of porosity determinations can sometimes be improved by use of shear wave velocities, provided that the shear wave amplitudes are large enough to delineate the shear arrival from the preceding compressional arrival on the character log. Borehole data are presented which show that the difference between shear wave and compressional wave reciprocal velocities can be used to predict porosities. This is a refinement which may allow the prediction of porosities from single-receiver acoustic logs without introduction of errors from borehole fluid travel-times. Laboratory and field data are presented to show that the relationship between compressional and shear wave velocities can be used to indicate lithology.An example is presented to show that fractures usually cause a greater reduction in borehole shear wave amplitudes than in compressional wave amplitudes, an effect which may offer a more reliable means of detecting fractures.The complexity of the borehole acoustic wave train can make presently available cement bond logs highly sensitive to the gate and bias settings used. The character log offers a means to circumvent possible misinterpretations by recording all amplitudes, from which the interpreter can select the appropriate data for evaluating the cement bond.Character logs may also be used as a quality control for open-hole transit-time logs when existence of small compressional wave amplitudes interferes with the proper functioning of bias-controlled timing devices.Evaluation of the potential uses of character log data is not complete; but a character log presented in a form convenient for routine use would be a desirable addition to currently available logs. To summarize, possible applications for such a log in formation evaluation include the followingquality control of transit-time logs,refinement of porosity predictions,determination of lithology,improvement of fracture detection andimprovement of cement bond evaluation. Suggestions are made regarding the requirements for a sufficient but practical character log for routine use. Introduction: Acoustic logs have become a widely used porosity tool in formation evaluation. In addition, there is a growing application of acoustic logs in cement bond evaluation and fracture detection. These applications have mainly involved the use of logs of first-arrival transit times and amplitudes and have not included detailed studies of the complete signal.The purpose of this paper is to show that significant benefits in formation evaluation can be gained by a more complete use of the acoustic wave train generated in the borehole by an acoustic logging tool. We hope that this discussion will also stimulate further development of logs suitable for routine use so that these benefits may be realized.Examples of acoustic wave train logs, termed "character" logs, are presented to show that several identifiable acoustic waves are present in the borehole. The measurable characteristics of these acoustic waves and some of their relations to formation properties of interest are also discussed. The more obvious potential uses of character logs are listed, and some suggestions are made regarding the requirements for a sufficient but practical character log for routine use. CHARACTER LOGS: Some 10 years ago, Vogel and Summers and Broding noted that the signals received uphole from an acoustic logging tool located in a borehole had a number of interesting characteristics. The logging tool consisted of two or more pressure transducers spaced on an acoustically insulated body (Fig. 1a). One of the pressure transducers was used as a transmitter to generate pressure waves in the borehole fluid. The other transducer served as a receiver to detect any pressure waves reaching it in the borehole. The receiver then converted these pressure waves to electrical signals which were transmitted to the surface and displayed on an oscilloscope as a record of time vs receiver-signal amplitude. Fig. 1b is a schematic representation of a typical record. JPT P. 639^
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mavko, G., Mukerji, T., & Dvorkin, J. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108333016 · Cited by 1,734
Mondol, N. H., Bjørlykke, K., Jahren, J., & Høeg, K. (2007) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2007.03.006 · Cited by 373
Seismic monitoring at the Decatur, IL, CO2 sequestration demonstration site
Kaven, J. O., Hickman, S. H., McGarr, A. F., Walter, S., & Ellsworth, W. L. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.461 · Cited by 39
VERMEESCH, P. M., & MORGAN, J. V. (2004) · Meteoritics & Planetary Science · doi:10.1111/j.1945-5100.2004.tb01127.x · Cited by 38
Metadata
- Authors
- Pickett, G. R.
- Venue
- Journal of Petroleum Technology
- Publisher
- Society of Petroleum Engineers (SPE)
- Published
- 1963-06-01
- Volume
- 15
- Issue
- 06
- Pages
- 659-667
- ISSN
- 0149-2136 (ISSN-L)
- 1944-978X
- OpenAlex
- W2025893548
- Cited by
- 535
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Acoustic Character Logs and Their Applications in Formation Evaluation. https://app.cochat.ai/papers/10.2118/452-pa
- The paper
- Pickett, G. R. (1963). Acoustic Character Logs and Their Applications in Formation Evaluation. Journal of Petroleum Technology. https://doi.org/10.2118/452-pa
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.