CoChat

Cross-Correlation Technique for Phase Error Correction in Reflection Mode Terahertz Time Domain Spectroscopy

Open access
Koalla, Rajesh, Chaudhary, Anil Kumar · 2023 · Research Square

Preprint — published as 10.1364/ao.521944 · Paper page

The DOI matches its Crossref record; 40 of the 41 references it cites were found in a registry or an index, and 1 are not checked yet; none of the 4 sources its claims cite is checked for support yet.

Abstract

The Terahertz time-domain spectroscopy in reflection mode geometry provides valuable surface and subsurface information, making it suitable for layer analysis, coating, and non-destructive testing applications. The exchanging of position of sample and reference introduce a phase error when the position or alignment of the sample is not exactly maintained during measurements. This micrometre order of pitch error ( Δx) between the reference and the sample could lead to introduce inherent error in the phase spectrum of the sample. In the present work, a new novel approach based on cross-correlation technique has been demonstrated to solve the uncertainty in phase and to reveal the hidden characteristic features of the given sample in THz TDS spectroscopy. We illustrated and demonstrated the advantage of our approach by measuring the optical properties of Teflon and RDX by correcting misalignment of 31.5 and 41.4 µm range, respectively.

Checked 2026-11-19 · 1 reference not checked yet

Overview

CoChat Summary

TL;DR

The paper proposes cross-correlation of reference and sample THz time-domain pulses to estimate and correct phase error caused by micrometre-scale sample/reference misplacement in reflection-mode THz-TDS. It demonstrates the correction on Teflon and RDX, recovering Teflon’s refractive index of 1.4 and RDX absorption peaks at 0.83, 1.38, 1.92, and 2.24 THz.

Key findings

  • Cross-correlation maxima gave delays of 0.105 ps for Teflon and 0.138 ps for RDX, corresponding to misplacements of 31.5 µm and 41.4 µm, respectively.
  • Using minimum frequencies of 0.285 THz for Teflon and 0.264 THz for RDX, the corrected phase recovered expected optical properties: Teflon refractive index 1.4 and RDX signature absorption peaks at 0.83, 1.38, 1.92, and 2.24 THz.
  • Without correction, the refractive index and absorption coefficient showed discrepancies; the paper reports values higher than actual and RDX absorption peaks that were not sharp.
  • The method is presented as solving phase uncertainty and complications in reflection-mode THz-TDS due to reference/sample misplacement.

Methods

  • Reflection-mode THz-TDS measurements used a fibre-coupled handheld Toptica Teraflash system, a 1.55 µm femtosecond fibre-coupled laser, InGaAs/InAlAs photoconductive antennas, off-axis parabolic mirrors, and an 8° pulse–sample interaction angle; the reference was a gold-coated mirror, and samples were Teflon and RDX.
  • Time-domain sample and reference pulses were cross-correlated to determine the lag Δτ; the correction phase was calculated from Δτ and the minimum frequency f_min where the phase spectrum begins to show linear behaviour, then subtracted from the measured phase.
  • Fast Fourier Transform gave the frequency spectrum and transfer function, from which refractive index and absorption coefficient were extracted.

Limitations

  • The paper does not include a limitations section; evident limitations include demonstration on only two materials, Teflon and RDX, with one gold-mirror reference and specific misalignments, without broader validation across other samples or geometries.
  • Evident: the correction depends on identifying f_min from the phase spectrum and on the cross-correlation peak; sensitivity to noise or ambiguous f_min/peak selection is not quantified.
  • Evident: no uncertainty, error-propagation, or repeatability analysis is reported for the corrected phase or extracted optical constants.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.21203/rs.3.rs-3177655/v1

Cites

40 of 41 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 3 Not valid · 2 Not checked · 17 Own results and interpretations

5 more claims

Create a free account to see all 22 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 5
  • The quote only partly states this claim. 4
  • Probably not a substantial claim. 4

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 41 references

Research works printed but not linked: 1

  1. Walker JS (1996) Fast fourier transforms. CRC press

Cited by

See all 4

Metadata

Authors
Koalla, R., & Chaudhary, A. K.
Affiliations
University of Hyderabad
Venue
Research Square
Published
2023-07-25
Volume
63
Issue
17
Pages
4762-4762
ISSN
0003-6935 (ISSN-L)
OpenAlex
W4398234762
Cited by
4
References
38
Citations by year
2026: 3 · 2025: 1
FWCI
0.39
Type
journal article
Language
en
Open access
Locations
  • Applied Optics (publishedVersion)
  • Research Square (submittedVersion, cc-by)
Funders
  • Ministry of Defence (DRDO/18/1801/2016/01038: ACRHEM-Phase-III)
  • Advanced Centre of Research in High Energy Materials, University of Hyderabad
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Terahertz technology and applications
  • Physical Sciences › Chemistry › Spectroscopy › Spectroscopy and Laser Applications
  • Physical Sciences › Engineering › Mechanics of Materials › Thermography and Photoacoustic Techniques
Keywords
terahertz time-domain spectroscopy, reflection mode, phase correction, cross correlation function, phase spectrum, polytetrafluoroethylene, RDX, optical properties, subsurface characterization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Cross-Correlation Technique for Phase Error Correction in Reflection Mode Terahertz Time Domain Spectroscopy. https://app.cochat.ai/papers/10.21203/rs.3.rs-3177655/v1
The paper
Koalla, R., & Chaudhary, A. K. (2023). Cross-Correlation Technique for Phase Error Correction in Reflection Mode Terahertz Time Domain Spectroscopy. Research Square. https://doi.org/10.21203/rs.3.rs-3177655/v1

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.