The CO2-H2O system: III. A new experimental method for determining liquid-vapor equilibria at high subcritical temperatures
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A highly precise and accurate vibrating U-tube technique was developed to determine the upper baric stabilities of liquid-vapor assemblages in the CO 2 -H 2 O system at high subcritical temperatures (∼275-360 °C). The first step is to create an isobaric-isothermal, physically isolated and chemically homogeneous sample of “high-pressure” CO 2 -H 2 O fluid of known composition. Fluid pressure (P) is then lowered slowly at constant temperature. Pressure readings and matching values for τ (the period of vibration of the U-tube) are recorded at 0.1 or 0.2 MPa intervals. When the fluid begins to separate into two phases (liquid + vapor), a distinct inflection is observed in the trend of P vs. τ. Performing such experiments for fluid compositions at 0.05 mole fraction CO 2 (X CO2 ) intervals in the range 0.05 ≤ X CO2 ≤ 0.40 at 300 °C produced a complete high-P liquid-vapor boundary curve for the CO 2 -H 2 O system at that temperature. Agreement with corresponding curves determined in previous studies ranges from poor to excellent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Span, R., & Wagner, W. (1996) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555991 · Cited by 5,049
Cited by
Giammar, D. E., Bruant, R. G., & Peters, C. A. (2005) · Chemical Geology · doi:10.1016/j.chemgeo.2004.12.013 · Cited by 418
“Fortunately, several recent studies have advanced the understanding of CO2 solubility at the conditions of interest (Blencoe et al., 2001a; Blencoe et al., 2001b; Duan and Sun, 2003; Enick and Klara, 1990; Rosenbauer and Koksalan, 2002; Seitz and Blencoe, 1999).”
BackgroundSpycher, N., & Pruess, K. (2010) · Transport in Porous Media · doi:10.1007/s11242-009-9425-y · Cited by 315
“…EGS, the same two-phase behavior persists, although the amount of water in the CO2-rich phase increases significantly, reaching values of up to about 40–50 mol% at temperatures ∼275◦C and pressures between 200 and 600 bar (Takenouchi and Kennedy 1964, Todheide and Frank, 1964; Blencoe et al. 2001).”
BackgroundMethodResultInfluentialHeterogeneous porosity distribution in Portland cement exposed to CO2-rich fluids
Rimmelé, G., Barlet-Gouédard, V., Porcherie, O., Goffé, B., & Brunet, F. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.03.022 · Cited by 307
Well Technologies for CO 2 Geological Storage: CO 2 -Resistant Cement
Barlet-Gouédard, V., Rimmelé, G., Goffé, B., & Porcherie, O. (2007) · Oil & Gas Science and Technology - Revue de l'IFP · doi:10.2516/ogst:2007027 · Cited by 167
Miller, Q. R. S., Schaef, H. T., Kaszuba, J. P., Gadikota, G., McGrail, B. P., & Rosso, K. M. (2019) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.9b00301 · Cited by 98
Metadata
- Authors
- Blencoe, J. G., Naney, M. T., & Anovitz, L. M.
- Venue
- American Mineralogist
- Publisher
- Mineralogical Society of America
- Published
- 2001-09
- Volume
- 86
- Issue
- 9
- Pages
- 1100-1111
- ISSN
- 0003-004X (ISSN-L)
- OpenAlex
- W2282147504
- Cited by
- 51
- References
- 1
- FWCI
- 1.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The CO2-H2O system: III. A new experimental method for determining liquid-vapor equilibria at high subcritical temperatures. https://app.cochat.ai/papers/10.2138/am-2001-8-918
- The paper
- Blencoe, J. G., Naney, M. T., & Anovitz, L. M. (2001). The CO2-H2O system: III. A new experimental method for determining liquid-vapor equilibria at high subcritical temperatures. American Mineralogist. https://doi.org/10.2138/am-2001-8-918
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.