CoChat

Surface-specific measurements of olivine dissolution by phase-shift interferometry

King, H. E., Satoh, H., Tsukamoto, K., Putnis, A. · 2014 · American Mineralogist
Cited by 31

The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.

Abstract

Natural olivine dissolution and replacement often occurs preferentially along specific crystallographic planes. Thus, olivine reactivity at specific surfaces was examined in situ using phase-shift interferometry, which has a detection limit <10–5 nm/s, by dissolving two smoothed olivine crystal faces and a third sample corresponding to a surface that was generated by preferential dissolution along structural defects. The experiments were conducted at 22 °C and ambient pressure in 0.1 M NaCl solutions that were acidified to pHs between 1 and 4 using 0.1 M HCl. These experiments show that olivine dissolution can vary from one surface to another as well as in different areas of the same surface that have similar characteristics. The fastest vertical retreat occurred at the surfaces related to defects. However, only vertical advancement was observed at pH 1 on this surface consistent with the observation of isolated islands on the surface during atomic force microscopy investigations after the experiment. Raman analysis of the precipitated phase showed that it was not one of the thermodynamically stable phases expected from PHREEQC modeling.However, the correlation between the siloxane ring peak of amorphous silica with a similar peak in the precipitate spectrum, in conjunction with previous experimental and natural observations, indicates that the precipitate was a Si-enriched amorphous phase. Therefore, precipitation can facilitate the further dissolution of olivine on this surface as long as it does not completely armor the surface. Precipitate formation on surfaces associated with outcropping defects supports the natural observations of preferential dissolution and serpentinization along these defects implying that the fast dissolution of these surfaces will play a critical role during olivine replacement. In addition, comparison with flow-through experiments indicates that outflow fluid chemistry may provide an incomplete picture of processes occurring during olivine dissolution.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2138/am.2014.4606

Cites

8 of 8 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 31

Metadata

Authors
King, H. E., Satoh, H., Tsukamoto, K., & Putnis, A.
Venue
American Mineralogist
Published
2014-02-01
Volume
99
Issue
2-3
Pages
377-386
ISSN
0003-004X (ISSN-L)
OpenAlex
W2085394231
Cited by
31
References
8
FWCI
3.78
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.