The DOI matches its Crossref record.
Use of Risk Assessment for Development of Microbial Standards
Abstract
A single-hit exponential model and a β-distributed “infectivity probability” model were used to evaluate the potential health risks from drinking water containing low levels of protozoan cysts and viruses, respectively. The models were based on dose response curves developed from human feeding studies and assumed consumption of 2 L/day. The US EPA has suggested that one infection/10,000/year is an acceptable risk for infectious agents acquired through potable water. Based on this risk, acceptable levels of viruses and cysts were determined using the probability models. Thus poliovirus and rotavirus levels should not be more than 0.1 and 0.3 pfu/100L respectively per day. Giardia levels should be below 0.2 cysts/100L. To achieve a 1:10,000 annual risk, the geometric average should not exceed 10−3 organisms/100L. As monitoring treated water for these levels would be difficult, source waters may be monitored. Geometric averages of 1-100 organisms/100L require 3-5 logs of treatment reduction to achieve the 1:10,000 risk. The risk models for viruses and protozoa can be used to evaluate the occurrence of pathogens in source water and determine the appropriate treatment needed to obtain specific levels of safety for drinking water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microbiological Safety of Drinking Water
Szewzyk, U., Szewzyk, R., Manz, W., & Schleifer, K.-H. (2000) · Annual Review of Microbiology · doi:10.1146/annurev.micro.54.1.81 · Cited by 580
Hamilton, A. J., Stagnitti, F., Premier, R., Boland, A.-M., & Hale, G. (2006) · Applied and Environmental Microbiology · doi:10.1128/aem.72.5.3284-3290.2006 · Cited by 285
Dowdle, W., Van Der Avoort, H., De Gourville, E., Delpeyroux, F., Desphande, J., Hovi, T., Martin, J., Pallansch, M., Kew, O., & Wolff, C. (2006) · Risk Analysis · doi:10.1111/j.1539-6924.2006.00844.x · Cited by 61
Metadata
- Authors
- Rose, J. B., & Gerba, C. P.
- Venue
- Water Science and Technology
- Publisher
- IWA Publishing
- Published
- 1991-07-01
- Volume
- 24
- Issue
- 2
- Pages
- 29-34
- ISSN
- 0273-1223 (ISSN-L)
- 1996-9732
- OpenAlex
- W2266207054
- Cited by
- 168
- References
- 0
- FWCI
- 3.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Use of Risk Assessment for Development of Microbial Standards. https://app.cochat.ai/papers/10.2166/wst.1991.0025
- The paper
- Rose, J. B., & Gerba, C. P. (1991). Use of Risk Assessment for Development of Microbial Standards. Water Science and Technology. https://doi.org/10.2166/wst.1991.0025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.