Correlation analysis among highway stormwater pollutants and characteristics
The DOI matches its Crossref record.
Abstract
Stormwater runoff from highway land use is a common non-point source of pollutants. A large quantity of highway stormwater runoff characteristics were collected in California during the past three years. Correlations among various water quality parameters and constituents were performed using data sets collected over the 2000–2001, 2001–2002, and 2002–2003 wet seasons for 18, 21 and 23 storm events at three highway sites in west Los Angeles, California. In addition, statistical and graphical correlation analysis of the mass first flush ratio (MFF) with storm characteristics was made to determine if the first flush is related to site or storm characteristics. The results and analyses performed indicate that (1) TSS correlates well with most particulate-bound metals. However, TSS was poorly correlated with most other pollutants. (2) Strong correlations were also observed among dissolved and total metals; DOC, COD, TKN and oil and grease; conductivity and Cl. (3) Total metals, COD and DOC were generally well correlated with mass first flush, suggesting that BMPs that treat the early portion of runoff have an opportunity to remove high concentrations of these pollutants. Keywords Correlation analysis; highway stormwater runoff; mass first flush; storm characteristics
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Huber, M., Welker, A., & Helmreich, B. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2015.09.033 · Cited by 389
“Han et al. (2006b) performed first flush-enhanced sampling, in which five grab samples were collected every 15min in the first hour after the start of a detectable runoff.”
BackgroundInfluentialField Performance of Bioretention: Water Quality
Davis, A. P. (2007) · Environmental Engineering Science · doi:10.1089/ees.2006.0190 · Cited by 306
Metals and PAHs adsorbed to street particles
Lau, S.-L., & Stenstrom, M. K. (2005) · Water Research · doi:10.1016/j.watres.2005.08.002 · Cited by 164
“As a comparison, Han et al. (2004) report median highway runoff concentrations of particulate copper and TSS as 27mm/l and 67.7mg/l, respectively, which is approximately 44% of what is expected from the particles reported in this paper.”
MethodSelf-citationGao, Z., Zhang, Q., Li, J., Wang, Y., Dzakpasu, M., & Wang, X. C. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.117976 · Cited by 82
Nie, F.-H., Li, T., Yao, H.-F., Feng, M., & Zhang, G.-K. (2008) · Journal of Zhejiang University-SCIENCE A · doi:10.1631/jzus.a0820271 · Cited by 30
Metadata
- Authors
- Han, Y. H., Lau, S. L., Kayhanian, M., & Stenstrom, M. K.
- Venue
- Water Science and Technology
- Publisher
- IWA Publishing
- Published
- 2006-01-01
- Volume
- 53
- Issue
- 2
- Pages
- 235-243
- ISSN
- 0273-1223 (ISSN-L)
- 1996-9732
- OpenAlex
- W2005996681
- Cited by
- 98
- References
- 0
- FWCI
- 9.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.