Processing of dielectric materials and metals with PS laserpulses
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Ever since industrially applicable ps laser systems have been available, cold ablation with ultra short laser pulses is of huge interest when high requirements concerning accuracy, defined surface roughness and small heat affected zone are demanded. Interesting applications are in the fields of surface and 3-d structuring with direct and induced processes. For a profitable industrial use of this technology high process efficiency is required, which is enabled by the development of systems with high average power of more than 100 W. The process efficiency directly scales with the average power when the repetition rate of the system is properly chosen. But aside from process efficiency often a high surface quality (low surface roughness, minimized surface melting and no oxidation processes) is desired. These measures are not only strongly affected by the laser parameters but also by the strategy of structuring. Especially for surface structuring the corresponding requirements for the equipment of the beam guiding system are often not accomplishable and therefore there is a strong demand for new technologies which have to be developed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Ablation threshold dependence on pulse duration for copper
Hashida, M., Semerok, A. F., Gobert, O., Petite, G., Izawa, Y., & Wagner, J. F. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00463-4 · Cited by 220
Cited by
Surface Structuring with Ultra-short Laser Pulses: Basics, Limitations and Needs for High Throughput
Neuenschwander, B., Jaeggi, B., Schmid, M., & Hennig, G. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.017 · Cited by 194
“2a) show a result from marking lines with different repetition rates but constant pulse-pulse distance [17,19,21,22] and fig.”
BackgroundSelf-citationInfluence of the pulse duration in the ps-regime on the ablation efficiency of metals
Jaeggi, B., Neuenschwander, B., Schmid, M., Muralt, M., Zuercher, J., & Hunziker, U. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.118 · Cited by 133
Self-citationHigh-pulse repetition frequency ultrashort pulse laser processing of copper
Schille, J., Schneider, L., Lickschat, P., Loeschner, U., Ebert, R., & Exner, H. (2015) · Journal of Laser Applications · doi:10.2351/1.4906482 · Cited by 30
Metadata
- Authors
- Neuenschwander, B., Bucher, G. F., Hennig, G., Nussbaum, C., Joss, B., Muralt, M., Zehnder, S., Hunziker, U. W., & Schütz, P.
- Venue
- ICALEO 2010: 29th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing
- Publisher
- Laser Institute of AmericaLIA
- Published
- 2010-09-01
- Pages
- 707-715
- OpenAlex
- W2896415751
- Cited by
- 45
- References
- 2
- FWCI
- 8.22
- Type
- conference paper
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Processing of dielectric materials and metals with PS laserpulses. https://app.cochat.ai/papers/10.2351/1.5062103
- The paper
- Neuenschwander, B., Bucher, G. F., Hennig, G., Nussbaum, C., Joss, B., Muralt, M., Zehnder, S., Hunziker, U. W., & Schütz, P. (2010). Processing of dielectric materials and metals with PS laserpulses. ICALEO 2010: 29th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. https://doi.org/10.2351/1.5062103
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.