CoChat
Sign Up
Cited by 76Surface Treatment and CoatingsAdditive Manufacturing Materials and ProcessesHigh-Temperature Coating Behaviors

The DOI matches its Crossref record.

Comparative study of stainless steel AISI 431 coatings prepared by extreme-high-speed and conventional laser cladding

Li, Liqun, Shen, Faming, Zhou, Yuandong, Tao, Wang·2019·Journal of Laser Applications
DOI 10.2351/1.5094378
Open this paper in CoChat — free account

Abstract

High quality 431 steel coatings were prepared on a 27SiMn substrate by extreme-high-speed laser cladding (EHLA) and conventional laser cladding (CLA), respectively. The cladding speed of the EHLA process was 150 m/min, and the surface rate could reach up to 1.14 m2/h, which is four times higher than that of the CLA process. The microstructure of the coatings was investigated in detail. The microstructure of both coatings was dominated by dendrites. Benefitting from the ultrahigh cooling rate, the dendrites of EHLA coatings were more refined than that of CLA coatings. The element distribution between dendrites and interdendritic regions was more uniform. The corrosion resistance was evaluated by electrochemical tests. The results indicated that the EHLA coatings performed better corrosion resistance due to the fine uniform microstructure.

Overview

Integrity signals

Registry

Crossref · 10.2351/1.5094378

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • EHLA has demonstrated lower dilution of the substrate compared to conventional laser cladding due to the lower energy input required to deposit coatings.

    “In addition, EHLA has demonstrated lower dilution of the substrate compared to conventional laser cladding due to the lower energy input required to deposit coatings [36].”

    From High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review (2024) · cites this paper as [36]

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 33

  1. 2019, Corrosion protection of mild steel in different aqueous media via epoxy/nanomaterial coating: Preparation, characterization and mathematical views, J. Mater. Res. Technol., 8, 424, 10.1016/j.jmrt.2018.03.003 · DOI
  2. 2015, Experimental and computational investigation on the corrosion inhibition characteristics of mild steel by some novel synthesized imines in hydrochloric acid solutions, Corros. Sci., 92, 104, 10.1016/j.corsci.2014.11.040 · DOI
  3. 2015, Corrosion inhibition of mild steel by two new S-heterocyclic compounds in 1M HCl: Experimental and computational study, Corros. Sci., 94, 21, 10.1016/j.corsci.2015.01.025 · DOI
  4. 2015, Microstructural characterisation of friction stir welding joints of mild steel to Ni-based alloy 625, Mater. Charact., 110, 126, 10.1016/j.matchar.2015.10.023 · DOI
  5. 1995, Corrosion protection of mild steel by coatings containing polyaniline, Synthetic. Met., 71, 2163, 10.1016/0379-6779(94)03204-J · DOI
  6. 2017, Effect of temperature and hydrodynamic conditions on corrosion inhibition of an azomethine compounds for mild steel in 1 M HCl solution, J. Taiwan Inst. Chem. E, 71, 388, 10.1016/j.jtice.2016.11.026 · DOI
  7. 2014, Investigation of adsorption and corrosion inhibition of mild steel in hydrochloric acid solution by 5-(4-dimethylaminobenzylidene) rhodanine, Corros. Sci., 79, 169, 10.1016/j.corsci.2013.11.001 · DOI
  8. 2014, Corrosion inhibition of mild steel in acidic solution by Tagetes erecta (Marigold flower) extract as a green inhibitor, Corros. Sci., 85, 352, 10.1016/j.corsci.2014.04.036 · DOI
  9. 2016, Influence of rare earths addition on residual stress of Fe-based coating prepared by brush plating technology, J. Rare Earth., 34, 336, 10.1016/S1002-0721(16)60033-9 · DOI
  10. 2016, Electropolishing parameters optimization for enhanced performance of nickel coating electroplated on mild steel, Surf. Coat. Tech., 286, 285, 10.1016/j.surfcoat.2015.12.027 · DOI
  11. 2016, ,, J. Adhes. Sci. Technol., 30, 2224, 10.1080/01694243.2016.1178027 · DOI
  12. 2012, Dilution effect on the formation of amorphous phase in the laser cladded Ni–Fe–B–Si–Nb coatings after laser remelting process, Appl. Surf. Sci., 258, 7956, 10.1016/j.apsusc.2012.04.144 · DOI
  13. 2008, Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method, Mater. Manf. Process, 23, 413, 10.1080/10426910801940391 · DOI
  14. 2018, Crack density and tribological performance of hard-chrome coatings, J. Tribol. Int., 121, 333, 10.1016/j.triboint.2018.01.055 · DOI
  15. 2006, HVOF coatings as an alternative to hard chrome for pistons and valves, Wear, 261, 477, 10.1016/j.wear.2005.12.005 · DOI
  16. 2016, High performance corrosion resistant coatings by novel coaxial cold- and hot-wire laser cladding methods, J. Laser Appl., 28, 012011, 10.2351/1.4936988 · DOI
  17. 2015, Effect of process parameters in laser cladding on substrate melted areas and the substrate melted shape, J. Laser Appl., 27, S29201, 10.2351/1.4906376 · DOI
  18. 2018, In situ control of tempered martensite during laser cladding repair of aero-grade 300 M steel using AISI 420 stainless steel powder, J. Laser Appl., 30, 032502, 10.2351/1.5040629 · DOI
  19. 2007, Preparation of thin metal layers on polymers, Acta Polytech., 47, 9
  20. 2009, Hard coatings based on thermal spray and laser cladding, Int. J. Refract. Met. H, 27, 485, 10.1016/j.ijrmhm.2008.09.017 · DOI
  21. 2011, Microstructural characterization of AISI 431 martensitic stainless steel laser-deposited coatings, J. Mater. Sci., 46, 3405, 10.1007/s10853-010-5229-2 · DOI
  22. 1997, Analysis of the laser-cladding process for stellite on steel, J. Metall. Mater. Trans. A, 28B, 501, 10.1007/s11663-997-0117-0 · DOI
  23. 2005, Parametric investigation of pulsed Nd:YAG laser cladding of satellite 6 on stainless steel, J. Surf. Coat. Technol., 194, 225, 10.1016/j.surfcoat.2004.03.058 · DOI
  24. 2016, Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying, J. Laser Appl., 28, 022501, 10.2351/1.4943910 · DOI
  25. 2015, Correlation between sensitisation and pitting corrosion of AISI 403 martensitic stainless steel, Corros. Sci., 92, 301, 10.1016/j.corsci.2014.12.009 · DOI
  26. 2016, Effect of quenching and partitioning on the microstructure evolution and electrochemical properties of a martensitic stainless steel, Corros. Sci., 103, 95, 10.1016/j.corsci.2015.11.010 · DOI
  27. 2011, Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques, Electrochim. Acta, 56, 7740, 10.1016/j.electacta.2011.05.106 · DOI
  28. 1981, The nucleation and growth of two-dimensional anodic films under galvanostatic conditions, J. Electroanal. Chem., 124, 247, 10.1016/S0022-0728(81)80302-6 · DOI
  29. 2016, An investigation on the continuous and uniform thin membrane passive film formed on sputtered nanocrystalline stainless steel, Corros. Sci., 104, 71, 10.1016/j.corsci.2015.11.031 · DOI
  30. 2012, Grain size distribution effects on the corrosion behaviour of materials, Corros. Sci., 62, 90, 10.1016/j.corsci.2012.04.040 · DOI
  31. 2015, Comparison of electrochemical behavior between coarse-grained and fine-grained AISI 430 ferritic stainless steel by Mott–Schottky analysis and EIS measurements, J. Alloy Compd., 639, 301, 10.1016/j.jallcom.2015.03.142 · DOI
  32. 2015, The effects of grain refinement and deformation on corrosion resistance of passive film formed on the surface of 304 stainless steels, Mater. Res. Bull., 70, 896, 10.1016/j.materresbull.2015.06.030 · DOI
  33. 2010, Revealing the relationship between grain size and corrosion rate of metals, Scr. Mater., 63, 1201, 10.1016/j.scriptamat.2010.08.035 · DOI

Cited by

Sorted by citations

Metadata

Authors
Li, L., Shen, F., Zhou, Y., & Tao, W.
Affiliations
Harbin Institute of Technology (CN)
ORCID
Li, Liqun
Venue
Journal of Laser Applications
Publisher
Laser Institute of America
Published
2019-10-04
Volume
31
Issue
4
ISSN
  • 1042-346X (ISSN-L)
  • 1938-1387
DOI
10.2351/1.5094378
OpenAlex
W2977749407
Cited by
76
References
0
Citations by year
2026: 7 · 2025: 11 · 2024: 12 · 2023: 21 · 2022: 13 · 2021: 7 · 2020: 5
FWCI
3.51
Type
journal article
Language
en
Open access
closed
Locations
Journal of Laser Applications (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
  • Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
Keywords
laser cladding, cladding speed, dendritic microstructure, dendrite refinement, interdendritic region, elemental distribution, corrosion resistance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review