The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Biomass as a Source of Renewable Carbon for Iron and Steelmaking
Open accessAbstract
Fossil fuel-based carbon is widely used in iron and steelmaking in a number of forms, and the replacement of these materials with renewable carbon derived from biomass is seen as offering the greatest potential to reduce the greenhouse gas footprint of steel production. Life cycle assessment methodology has been used to estimate the greenhouse gas footprint of charcoal production from biomass, as well as the potential reductions in greenhouse gas emissions from the use of charcoal from biomass in the integrated, mini-mill/EAF and direct smelting steelmaking routes. The results indicated that the use of charcoal in the integrated steelmaking route in likely applications and substitution rates has the potential to reduce the greenhouse gas footprint of steel by 0.69–1.21 t CO2e/t steel (or 31–57%) without any charcoal production by-product (bio-oil and electricity) credits, and by 0.91–1.61 t CO2e/t steel (42–74%) with these by-product credits included. The corresponding reductions for the mini-mill/EAF and direct smelting routes were 0.028–0.056 t CO2e/t steel (5.5–11%) and 0.34–1.70 t CO2e/t steel (16–80%) without by-product credits, and 0.037–0.075 t CO2e/t steel (7.3–14.7%) and 0.45–2.25 t CO2e/t steel (21–106%) with by-product credits respectively. However, the magnitude of the by-product credits depends on the by-product yields in the charcoal retort, which in turn are dependent on a number of factors, in particular, the nature of the pyrolysis process (fast or slow) and the biomass feed composition. Estimates of the potential plantation areas available to grow the biomass required to produce charcoal for steelmaking purposes in a sustainable manner, together with estimates of sources of biomass residues suggest that it is possible that an appreciable amount of the world's steel production can utilise charcoal in place of coal or coke over the coming decades. However, transportation is expected to be a significant issue affecting the cost of charcoal delivered to steel plants in all biomass source scenarios. Other issues such as technical aspects of charcoal use in steelmaking and economics will also play a significant role in the uptake of charcoal from biomass as a source of renewable carbon for iron and steelmaking.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Roberts, K. G., Gloy, B. A., Joseph, S., Scott, N. R., & Lehmann, J. (2010) · Environmental Science & Technology · doi:10.1021/es902266r · Cited by 1,243
The contribution of biomass in the future global energy supply: a review of 17 studies
Berndes, G., Hoogwijk, M., & van den Broek, R. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00185-x · Cited by 1,149
Cited by
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Biomass applications in iron and steel industry: An overview of challenges and opportunities
Mousa, E., Wang, C., Riesbeck, J., & Larsson, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.07.061 · Cited by 471
A General Vision for Reduction of Energy Consumption and CO2 Emissions from the Steel Industry
Holappa, L. (2020) · Metals · doi:10.3390/met10091117 · Cited by 336
Igogo, T., Awuah-Offei, K., Newman, A., Lowder, T., & Engel-Cox, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117375 · Cited by 197
Chowdhury, J. I., Hu, Y., Haltas, I., Balta-Ozkan, N., Matthew, G. J., & Varga, L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.040 · Cited by 186
Metadata
- Authors
- Norgate, T., Haque, N., Somerville, M., & Jahanshahi, S.
- Venue
- ISIJ International
- Publisher
- Iron and Steel Institute of Japan
- Published
- 2012
- Volume
- 52
- Issue
- 8
- Pages
- 1472-1481
- ISSN
- 0915-1559 (ISSN-L)
- 1347-5460
- OpenAlex
- W2013774740
- Cited by
- 191
- References
- 3
- FWCI
- 17.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomass as a Source of Renewable Carbon for Iron and Steelmaking. https://app.cochat.ai/papers/10.2355/isijinternational.52.1472
- The paper
- Norgate, T., Haque, N., Somerville, M., & Jahanshahi, S. (2012). Biomass as a Source of Renewable Carbon for Iron and Steelmaking. ISIJ International. https://doi.org/10.2355/isijinternational.52.1472
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.