Lubrication Condition Monitoring of Practical Ball Bearings by Electrical Impedance Method
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this study, the electrical impedance method was developed to monitor the thickness and breakdown ratio of oil films in elliptical elastohydrodynamic (EHD) contacts of practical ball bearings. First, it is theoretically shown that the oil film thickness and breakdown ratio can be simultaneously measured from the complex impedance generated when a sinusoidal voltage is applied to elliptical contacts. Subsequently, lubrication conditions of practical ball bearings were monitored at an ambient temperature to verify the measurement accuracy of the developed method. The oil film thickness in the low-speed range was consistent with the theoretical value calculated by Hamrock–Dowson equation. However, in the high-speed range, the oil film was thinner than the theoretical value considered an ambient temperature. In this high-speed range, the results of both the outer ring temperature and bearing torque revealed that the viscous shear heating and starvation were occurring simultaneously, thus supporting that the measured thickness would be thinner than the theoretical value. Besides, the developed method can also measure the breakdown ratio, confirming that it increases in the low-speed range where the bearing torque increases. That is, it indicates that not only the oil film thickness but also the breakdown ratio can be evaluated quantitatively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Goksem, P. G., & Hargreaves, R. A. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453183 · Cited by 58
Goksem, P. G., & Hargreaves, R. A. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453184 · Cited by 21
Cited by
Electrical bearing damage, a problem in the nano- and macro-range
Schneider, V., Behrendt, C., Höltje, P., Cornel, D., Becker-Dombrowsky, F. M., Puchtler, S., Gutiérrez Guzmán, F., Ponick, B., Jacobs, G., & Kirchner, E. (2022) · Lubricants · doi:10.3390/lubricants10080194 · Cited by 74
Schneider, V., Bader, N., Liu, H., & Poll, G. (2022) · Tribology International · doi:10.1016/j.triboint.2022.107524 · Cited by 55
Schneider, V., Liu, H.-C., Bader, N., Furtmann, A., & Poll, G. (2021) · Tribology International · doi:10.1016/j.triboint.2020.106714 · Cited by 49
Metadata
- Authors
- Maruyama, T., Maeda, M., & Nakano, K.
- Venue
- Tribology Online
- Publisher
- Japanese Society of Tribologists
- Published
- 2019-12-15
- Volume
- 14
- Issue
- 5
- Pages
- 327-338
- ISSN
- 1881-218X (ISSN-L)
- 1881-2198
- OpenAlex
- W2994765626
- Cited by
- 60
- References
- 2
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lubrication Condition Monitoring of Practical Ball Bearings by Electrical Impedance Method. https://app.cochat.ai/papers/10.2474/trol.14.327
- The paper
- Maruyama, T., Maeda, M., & Nakano, K. (2019). Lubrication Condition Monitoring of Practical Ball Bearings by Electrical Impedance Method. Tribology Online. https://doi.org/10.2474/trol.14.327
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.