The Effect of Viscous Shear Heating on Both Film Thickness and Rolling Traction in an EHL Line Contact—Part II: Starved Conditions
The DOI matches its Crossref record.
Abstract
A theoretical analysis of both fully flooded rolling traction and film thickness in an EHL line contact has been presented in Part I of this paper. The effect of viscous shear heating was investigated and the results predict a significant reduction in both fully flooded film thickness and rolling traction, relative to the isothermal case, as speed is increased. In this part of the Series, the analysis is extended to consider the calculation of starved rolling traction and film thickness, including viscous shear heating of the lubricant in the inlet region. An approximate equation has been developed, which predicts both the isothermal and non isothermal starved film thickness for all conditions of inlet boundary distance, rolling speed, load, geometry, material constants and lubricant properties. The results show that both rolling traction and film thickness are significantly reduced from the starved isothermal case. For the starved isothermal case, the theoretical analysis for the film thickness agrees closely with experimental data and published empirical formula by Wymer and Cameron, (1974) and the theoretical work of Wolveridge, et al. (1971).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The dimensionless parameters 𝑈 , 𝑊 , and 𝐺 (see Eq. (3)) have been shown time and time again to provide excellent predictive power for the EHL behavior of the contact [43-46][11,47].”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [43]
Citations
Cites
Still being checked.
Cited by
A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears
Wu, S., & Cheng, H. S. (1991) · Tribology Transactions · doi:10.1080/10402009108982050 · Cited by 83
Lubrication Condition Monitoring of Practical Ball Bearings by Electrical Impedance Method
Maruyama, T., Maeda, M., & Nakano, K. (2019) · Tribology Online · doi:10.2474/trol.14.327 · Cited by 60
Semi-Analytical Modeling of Crack Initiation Dominant Contact Fatigue Life for Roller Bearings
Cheng, W., & Cheng, H. S. (1997) · Journal of Tribology · doi:10.1115/1.2833163 · Cited by 42
Stammler, M., Schwack, F., Bader, N., Reuter, A., & Poll, G. (2018) · Wind energy science · doi:10.5194/wes-3-97-2018 · Cited by 39
Nogi, T. (2015) · Journal of Tribology · doi:10.1115/1.4030203 · Cited by 29
Metadata
- Authors
- Goksem, P. G., & Hargreaves, R. A.
- Affiliations
- Sunderland Polytechnic, England
- Venue
- Journal of Lubrication Technology
- Publisher
- Wiley
- Published
- 1978-07-01
- Volume
- 100
- Issue
- 3
- Pages
- 353-358
- ISSN
- 0022-2305 (ISSN-L)
- OpenAlex
- W4238973490
- Cited by
- 21
- References
- 0
- Citations by year
- 2024: 3 · 2023: 4 · 2022: 4 · 2021: 1 · 2019: 1 · 2018: 1 · 2015: 1
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Lubrication Technology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- elastohydrodynamic lubrication, line contact, film thickness, starved lubrication, distance to boundary, rolling speed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Effect of Viscous Shear Heating on Both Film Thickness and Rolling Traction in an EHL Line Contact—Part II: Starved Conditions. https://app.cochat.ai/papers/10.1115/1.3453184
- The paper
- Goksem, P. G., & Hargreaves, R. A. (1978). The Effect of Viscous Shear Heating on Both Film Thickness and Rolling Traction in an EHL Line Contact—Part II: Starved Conditions. Journal of Lubrication Technology. https://doi.org/10.1115/1.3453184
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.