The DOI matches its Crossref record.
Origins of calcite in a boiling geothermal system
Open accessAbstract
The formation of hydrothermal calcite relates to the movement of carbon dioxide in a geothermal system as governed by boiling, dilution, and condensation. In this paper we show how these processes control the occurrence, distribution, and stable isotope composition of calcite based on a study at Broadlands-Ohaaki. The two principal calcite occurrences in the Broadlands-Ohaaki geothermal system are: (1) as replacement of rock forming minerals and volcanic glass; and (2) as platy crystals infilling voids. Both are stable over a broad temperature range from 160 degrees C to 300 degrees C. Replacement calcite is widespread and forms through hydrolysis reactions involving calcium alumino-silicates and sub-boiling liquids that contain 0.3 to 0.75 m CO ~2~ . Platy calcite, in contrast, forms over a restricted vertical interval of a few hundred meters within the upflow zone. It precipitates from boiling fluids through exsolution of carbon dioxide as indicated by coeval liquid-rich and vapor-rich fluid inclusions and its formation in the two-phase zone. Fluid inclusion data help to define the boiling paths of fluids from which platy calcite formed. Homogenization temperatures range from 160 degrees C to 310 degrees C and are consistent within the present geothermal regime. Ice melting temperatures range from 0.0 to -1.0 degrees C and indicate the presence of up to 0.5 m dissolved carbon dioxide. Model boiling curves calculated to match these data show how the concentration of dissolved carbon dioxide in the preboiled fluid dictates the depth of first boiling. Most fluid inclusion data lie along a model boiling path characteristic of the centre of the upflow zone, in which the rising fluid (initially containing 0.75 m CO ~2~ ) begins to boil at approximately 320 degrees C and approximately 2000 m depth; data from well Br-18 instead matches a curve in which the rising fluid (initially containing 0.53 m CO ~2~ ) begins boiling at approximately 245 degrees C and approximately 900 m depth. The shallowing of the depth of first boiling likely results from dilution of dissolved carbon dioxide in the parent chloride water, as it rises and mixes with marginal waters. Calcite precipitates from both shallow formed steam-headed groundwater and deeply derived chloride water, and these waters are isotopically distinct. At Broadlands-Ohaaki, the delta ^18^ 0 values of calcite at 200 degrees C range from 0.5 to 7.5 per mil, whereas delta ^18^ 0 values of calcite at 200 degrees C range from 4 to 10 per mil. Taking appropriate temperature dependent fractionation factors into account, these data indicate equilibration with chloride water (delta ^18^ 0 ~H2O~ = -4.5 per mil) and steam-heated groundwater (delta ^18^ O ~H2O~ = -7.0 per mil), respectively. Oxygen isotopes of hydrothermal calcites in the nearby Wairakei and Waiotapu geothermal systems show similar patterns, consistent with the occurrence of both chloride and steam-heated waters there. Calcite formation is explained by a model that describes the distribution of two-phase conditions and aqueous carbon dioxide concentrations in a column of hydrothermal fluid rising through a rock matrix of isotropic permeability. In this ideal situation, platy calcite forms along the inner margin of the two-phase zone, having the shape of an inverted cone, whereas replacement calcite mostly forms in the surrounding one-phase liquid-only zone. The sparse occurrence of calcite at less than or equal to 800 m depth in the central upflow of the Ohaaki sector at Broadlands-Ohaaki is compatible with this model and appears related to the exsolution of dissolved carbon dioxide through boiling deeper in the system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of the formation of tectonic veins and their microstructures
Bons, P. D., Elburg, M. A., & Gomez-Rivas, E. (2012) · Journal of Structural Geology · doi:10.1016/j.jsg.2012.07.005 · Cited by 739
Epithermal Gold Deposits: STYLES, CHARACTERISTICS AND EXPLORATION
WHITE, N. C., & HEDENQUIST, J. W. (1995) · SEG Discovery · doi:10.5382/segnews.1995-23.fea · Cited by 556
Fluid Inclusions in Hydrothermal Ore Deposits
Bodnar, R. J., Lecumberri-Sanchez, P., Moncada, D., & Steele-MacInnis, M. (2014) · Treatise on Geochemistry · doi:10.1016/b978-0-08-095975-7.01105-0 · Cited by 364
Taking the Temperature of Hydrothermal Ore Deposits Using Clumped Isotope Thermometry
Mering, J. A., Barker, S. L. L., Huntington, K. W., Simmons, S., Dipple, G., Andrew, B., & Schauer, A. (2018) · Economic Geology · doi:10.5382/econgeo.2018.4608 · Cited by 13
Self-citation
Metadata
- Authors
- Simmons, S. F., & Christenson, B. W.
- Venue
- American Journal of Science
- Publisher
- American Journal of Science (AJS)
- Published
- 1994-03-01
- Volume
- 294
- Issue
- 3
- Pages
- 361-400
- ISSN
- 0002-9599 (ISSN-L)
- OpenAlex
- W2129483939
- Cited by
- 326
- References
- 0
- FWCI
- 4.94
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Origins of calcite in a boiling geothermal system. https://app.cochat.ai/papers/10.2475/ajs.294.3.361
- The paper
- Simmons, S. F., & Christenson, B. W. (1994). Origins of calcite in a boiling geothermal system. American Journal of Science. https://doi.org/10.2475/ajs.294.3.361
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.