Height unification using GOCE
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
With the gravity field and steady-state ocean circulation explorer (GOCE) (preferably combined with the gravity field and climate experiment (GRACE)) a new generation of geoid models will become available for use in height determination. These models will be globally consistent, accurate (<3 cm) and with a spatial resolution up to degree and order 200, when expressed in terms of a spherical harmonic expansion. GOCE is a mission of the European Space Agency (ESA). It is the first satellite equipped with a gravitational gradiometer, in the case of GOCE it measures the gradient components Vxx , Vyy, Vzzand Vxz. The GOCE gravitational sensor system comprises also a geodetic global positioning system (GPS)-receiver, three star sensors and ion-thrusters for drag compensation in flight direction. GOCE was launched in March 2009 and will fly till the end of 2013. Several gravity models have been derived from its data, their maximum degree is typically between 240 and 250. In summer 2012 a first re-processing of all level-1b data took place. One of the science objectives of GOCE is the unification of height systems. The existing height offsets among the datum zones can be determined by least-squares adjustment. This requires several precise geodetic reference points available in each height datum zone, physical heights from spirit levelling (plus gravimetry), the GOCE geoid and, in addition, short wavelength geoid refinement from terrestrial gravity anomalies. GOCE allows for important simplifications of the functional and stochastic part of the adjustment model. The future trend will be the direct determination of physical heights (orthometric as well as normal) from precise global navigation satellite system (GNSS)-positioning in combination with a next generation combined satellite-terrestrial high-resolution geoid model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The development and evaluation of the Earth Gravitational Model 2008 (EGM2008)
Pavlis, N. K., Holmes, S. A., Kenyon, S. C., & Factor, J. K. (2012) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2011jb008916 · Cited by 2,641
First GOCE gravity field models derived by three different approaches
Pail, R., Bruinsma, S., Migliaccio, F., Förste, C., Goiginger, H., Schuh, W.-D., Höck, E., Reguzzoni, M., Brockmann, J. M., Abrikosov, O., et al. (2011) · Journal of Geodesy · doi:10.1007/s00190-011-0467-x · Cited by 502
Gerlach, C., & Rummel, R. (2013) · Journal of Geodesy · doi:10.1007/s00190-012-0579-y · Cited by 54 · cited 1×
“(6) is negligible, if and only if an accurate and high resolution geoid model from GOCE is available, compare (Gatti, Reguzzoni & Venuti, 2012 or Gerlach & Rummel, 2012).”
Self-citation
Cited by
New ultrahigh‐resolution picture of Earth's gravity field
Hirt, C., Claessens, S., Fecher, T., Kuhn, M., Pail, R., & Rexer, M. (2013) · Geophysical Research Letters · doi:10.1002/grl.50838 · Cited by 319
EGM_TIM_RL05: An independent geoid with centimeter accuracy purely based on the GOCE mission
Brockmann, J. M., Zehentner, N., Höck, E., Pail, R., Loth, I., Mayer‐Gürr, T., & Schuh, W. (2014) · Geophysical Research Letters · doi:10.1002/2014gl061904 · Cited by 160
“It is very well suited, for the estimation of the DOT [e.g., Bingham et al., 2011; Becker et al., 2014], as a background model for local geoid computations or height unification [e.g., Rummel, 2013] or for the estimation of combined models [e.g., Pail et al., 2010].”
Determination of a high spatial resolution geopotential model using atomic clock comparisons
Lion, G., Panet, I., Wolf, P., Guerlin, C., Bize, S., & Delva, P. (2017) · Journal of Geodesy · doi:10.1007/s00190-016-0986-6 · Cited by 66
“Yet, this quantity is needed in itself, like using a high-resolution geoid as a reference for height on land and dynamic topography over the oceans (Rummel and Teunissen 1988; Rummel 2002, 2012; Sansò and Venuti 2002; Zhang et al. 2008; Sansò and Sideris 2013; Marti 2015).”
BackgroundZhang, P., Bao, L., Guo, D., Wu, L., Li, Q., Liu, H., Xue, Z., & Li, Z. (2020) · Remote Sensing · doi:10.3390/rs12244137 · Cited by 15
Metadata
- Authors
- Rummel, R.
- Venue
- Journal of Geodetic Science
- Publisher
- Walter de Gruyter GmbH
- Published
- 2012-12-01
- Volume
- 2
- Issue
- 4
- Pages
- 355-362
- ISSN
- 2081-9919 (ISSN-L)
- 2081-9943
- OpenAlex
- W2145396310
- Cited by
- 60
- References
- 3
- FWCI
- 4.42
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Height unification using GOCE. https://app.cochat.ai/papers/10.2478/v10156-011-0047-2
- The paper
- Rummel, R. (2012). Height unification using GOCE. Journal of Geodetic Science. https://doi.org/10.2478/v10156-011-0047-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.