Hall Thruster Cathode Flow Impact on Coupling Voltage and Cathode Life
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The cathode coupling voltage in Hall thrusters, which is the voltage difference between the cathode and the thruster beam plasma potential, is considered an indicator of the ease with which electrons flow from cathode to anode.Historically, the coupling voltage has beenminimizedby increasing the amount of propellant injected through the hollow cathode due to early observations that thismaximizes the discharge (or anode) efficiency.However, recent experiments described here show that the total thruster efficiency is independent of the cathode flow over the range from 5 to 10%of the propellant injected into the thruster body through the anode. For this reason, cathode flow rates can be reduced closer to the classic plume mode limit characteristic of the hollow cathode design without impacting the total thruster efficiency. Such reductions in cathode flow rate can significantly extend the cathode life, especially for higher-power Hall thrusters with larger discharge currents, where the normal Hall thruster cathode flow split will significantly exceed the optimum level for cathode operation and life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Goebel, D. M., Jameson, K. K., Watkins, R. M., Katz, I., & Mikellides, I. G. (2005) · Journal of Applied Physics · doi:10.1063/1.2135417 · Cited by 129
Self-citation
Cited by
Levchenko, I., Bazaka, K., Ding, Y., Raitses, Y., Mazouffre, S., Henning, T., Klar, P. J., Shinohara, S., Schein, J., Garrigues, L., et al. (2018) · Applied Physics Reviews · doi:10.1063/1.5007734 · Cited by 349
An overview of discharge plasma modeling for Hall effect thrusters
Hara, K. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab0f70 · Cited by 120
Goebel, D. M., Becatti, G., Mikellides, I. G., & Lopez Ortega, A. (2021) · Journal of Applied Physics · doi:10.1063/5.0051228 · Cited by 95
Self-citationA Reduced-Order Model for Thermionic Hollow Cathodes
Albertoni, R., Pedrini, D., Paganucci, F., & Andrenucci, M. (2013) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2013.2266512 · Cited by 39
Development of Hollow Cathodes for Space Electric Propulsion at Sitael
Pedrini, D., Misuri, T., Paganucci, F., & Andrenucci, M. (2017) · Aerospace · doi:10.3390/aerospace4020026 · Cited by 33
Metadata
- Authors
- Goebel, D., Jameson, K. K., & Hofer, R. R.
- Venue
- Journal of Propulsion and Power
- Published
- 2012-03
- Volume
- 28
- Issue
- 2
- Pages
- 355-363
- ISSN
- 0748-4658 (ISSN-L)
- 1533-3876
- OpenAlex
- W1989374908
- Cited by
- 84
- References
- 1
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.