The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Multiscale model for turbulent flows
Abstract
A is devised for computing general turbulent flows. The is an improvement over two-equation turbulence models in a critically important manner, that is, the new accounts for disalignment of the Reynolds-stress-tensor and the mean-strain-rate-tensor principal axes. The improved representation of the Reynolds-stress tensor has been accomplished through the introduction of a multiscale description of the turbulence, i.e., two energy scales are used corresponding to upper and lower partitions of the turbulence energy spectrum. A novel feature of the formulation is that the differential equation for the Reynolds-stress tensor is of first order, which in effect corresponds to what can be termed an algebraic stress model with convective terms. As a consequence of its mathematical simplicity, the is very efficient and easy to implement computationally. The is applied to a wide range of turbulent flows including homogeneous turbulence, compressible and incompressible two-dimensional boundary layers, and unsteady boundary layers including periodic separation and reattachment. Comparisons with corresponding experimental data show that the reproducesall salient features of the flows considered/Perturbation analysis of the viscous sublayer shows that integration through the sublayer can be accomplished with no special viscous modifications to the closure coefficients appearing in the model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tennekes, H., & Lumley, J. L. (1972) · The MIT Press eBooks · doi:10.7551/mitpress/3014.001.0001 · Cited by 8,340
Progress in the development of a Reynolds-stress turbulence closure
Launder, B. E., Reece, G. J., & Rodi, W. (1975) · Journal of Fluid Mechanics · doi:10.1017/s0022112075001814 · Cited by 4,003
The structure of turbulent shear flow
(1956) · Journal of the Franklin Institute · doi:10.1016/0016-0032(56)90704-9 · Cited by 3,765
Turbulent Transport of Momentum and Heat
Tennekes, H., & Lumley, J. L. (1972) · Cited by 3,166
The Statistical Description of Turbulence
Tennekes, H., & Lumley, J. L. (1972) · Cited by 3,166
The Structure of Turbulence in Fully Developed Pipe Flow
Laufer, J. (1953) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 1,030
Bardino, J., Ferziger, J. H., & Reynolds, W. C. (1983) · Stanford Univ. Report · Cited by 415
Johnson, D. A., & King, L. S. (1985) · AIAA Journal · doi:10.2514/3.9152 · Cited by 365
Cited by
Mean Flow and Turbulence Structure of Open-Channel Flow through Non-Emergent Vegetation
López, F., & García, M. H. (2001) · Journal of Hydraulic Engineering · doi:10.1061/(asce)0733-9429(2001)127:5(392 · Cited by 380
Saffarian, M. R., Moravej, M., & Doranehgard, M. H. (2020) · Renewable Energy · doi:10.1016/j.renene.2019.08.081 · Cited by 296
Bayesian uncertainty analysis with applications to turbulence modeling
Cheung, S. H., Oliver, T. A., Prudencio, E. E., Prudhomme, S., & Moser, R. D. (2011) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2010.09.013 · Cited by 267
CFD modelling of naturally ventilated double-skin facades with Venetian blinds
Ji, Y., Cook, M. J., Hanby, V., Infield, D. G., Loveday, D. L., & Mei, L. (2008) · Journal of Building Performance Simulation · doi:10.1080/19401490802478303 · Cited by 37
Metadata
- Authors
- Wilcox, D. C.
- Venue
- AIAA Journal
- Published
- 1988-11
- Volume
- 26
- Issue
- 11
- Pages
- 1311-1320
- ISSN
- 0001-1452 (ISSN-L)
- 1533-385X
- OpenAlex
- W2088385764
- Cited by
- 377
- References
- 8
- FWCI
- 5.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multiscale model for turbulent flows. https://app.cochat.ai/papers/10.2514/3.10042
- The paper
- Wilcox, D. C. (1988). Multiscale model for turbulent flows. AIAA Journal. https://doi.org/10.2514/3.10042
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.