The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A mathematically simple turbulence closure model for attached and separated turbulent boundary layers
Abstract
A new turbulence closure model designed specifically to treat two-dimensional, turbulent boundary layers with strong adverse pressure gradients and attendant separation is presented. The influence of history effects are modelled by using an ordinary differential equation derived from the turbulent kinetic energy equation to describe the stream wise development of the maximum Reynolds shear stress in conjunction with an assumed eddy viscosity distribution that has as its velocity scale the maximum Reynolds shear stress. In the outer part of the boundary layer, the eddy viscosity is treated as a free parameter which is adjusted in order to satisfy the ODE for the maximum shear stress. Because of this, the model is not simply an eddy viscosity model, but contains features of a Reynolds stress model. Comparisons with experiment are presented that clearly show the proposed model to be superior to the Cebeci-Smith one in treating strongly retarded and separated flows. In contrast to two-equation, eddy viscosity models, it requires only slightly more computational effort than simple models such as the Cebeci-Smith.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Calculation of boundary-layer development using the turbulent energy equation
Bradshaw, P., Ferriss, D. H., & Atwell, N. P. (1967) · Journal of Fluid Mechanics · doi:10.1017/s0022112067002319 · Cited by 820
The structure of turbulent shear flow
Busse, F. H. (1980) · Tectonophysics · doi:10.1016/0040-1951(80)90028-1 · Cited by 662
Bachalo, W. D., & Johnson, D. W. (1979) · AIAA Fluid and Plasma Dynamics Conference · doi:10.2514/6.1979-1479 · Cited by 67
Self-citation
Cited by
Two-equation eddy-viscosity turbulence models for engineering applications
Menter, F. R. (1994) · AIAA Journal · doi:10.2514/3.12149 · Cited by 21,593
A one-equation turbulence model for aerodynamic flows
SPALART, P., & ALLMARAS, S. (1992) · 30th Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.1992-439 · Cited by 9,499
Convective Heat and Mass Transfer
Ghiaasiaan, S. M. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511800603 · Cited by 788
Turbulence modeling validation
Bardina, J., Huang, P., Coakley, T., Bardina, J., Huang, P., & Coakley, T. (1997) · 28th Fluid Dynamics Conference · doi:10.2514/6.1997-2121 · Cited by 646
Recent advances on the numerical modelling of turbulent flows
Argyropoulos, C. D., & Markatos, N. C. (2015) · Applied Mathematical Modelling · doi:10.1016/j.apm.2014.07.001 · Cited by 548
Metadata
- Authors
- Johnson, D. A., & King, L. S.
- Venue
- AIAA Journal
- Published
- 1985-11
- Volume
- 23
- Issue
- 11
- Pages
- 1684-1692
- ISSN
- 0001-1452 (ISSN-L)
- 1533-385X
- OpenAlex
- W2017833761
- Cited by
- 365
- References
- 3
- FWCI
- 7.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.